259 lines
7.4 KiB
ReStructuredText
259 lines
7.4 KiB
ReStructuredText
.. _networking_with_qemu:
|
|
|
|
Networking with QEMU
|
|
####################
|
|
|
|
.. contents::
|
|
:local:
|
|
:depth: 2
|
|
|
|
This page describes how to set up a virtual network between a (Linux) host
|
|
and a Zephyr application running in a QEMU virtual machine (built for Zephyr
|
|
targets such as qemu_x86 and qemu_cortex_m3).
|
|
|
|
In this example, the :ref:`sockets-echo-server-sample` sample application from
|
|
the Zephyr source distribution is run in QEMU. The QEMU instance is
|
|
connected to a Linux host using a serial port, and SLIP is used to
|
|
transfer data between the Zephyr application and Linux (over a chain of
|
|
virtual connections).
|
|
|
|
Prerequisites
|
|
*************
|
|
|
|
On the Linux Host, fetch the Zephyr ``net-tools`` project, which is located
|
|
in a separate Git repository:
|
|
|
|
.. code-block:: console
|
|
|
|
git clone https://github.com/zephyrproject-rtos/net-tools
|
|
cd net-tools
|
|
make
|
|
|
|
.. note::
|
|
|
|
If you get an error about AX_CHECK_COMPILE_FLAG, install package
|
|
``autoconf-archive`` package on Debian/Ubuntu.
|
|
|
|
Basic Setup
|
|
***********
|
|
|
|
For the steps below, you will need at least 4 terminal windows:
|
|
|
|
* Terminal #1 is your usual Zephyr development terminal, with the Zephyr environment
|
|
initialized.
|
|
* Terminals #2, #3, and #4 are terminal windows with net-tools being the current
|
|
directory (``cd net-tools``)
|
|
|
|
Step 1 - Create helper socket
|
|
=============================
|
|
|
|
Before starting QEMU with network emulation, a Unix socket for the emulation
|
|
should be created.
|
|
|
|
In terminal #2, type:
|
|
|
|
.. code-block:: console
|
|
|
|
./loop-socat.sh
|
|
|
|
Step 2 - Start TAP device routing daemon
|
|
========================================
|
|
|
|
In terminal #3, type:
|
|
|
|
|
|
.. code-block:: console
|
|
|
|
sudo ./loop-slip-tap.sh
|
|
|
|
For applications requiring DNS, you may need to restart the host's DNS server
|
|
at this point, as described in :ref:`networking_internet`.
|
|
|
|
Step 3 - Start app in QEMU
|
|
==========================
|
|
|
|
Build and start the ``echo_server`` sample application.
|
|
|
|
In terminal #1, type:
|
|
|
|
.. zephyr-app-commands::
|
|
:zephyr-app: samples/net/sockets/echo_server
|
|
:host-os: unix
|
|
:board: qemu_x86
|
|
:goals: run
|
|
:compact:
|
|
|
|
If you see an error from QEMU about unix:/tmp/slip.sock, it means you missed Step 1
|
|
above.
|
|
|
|
Step 4 - Run apps on host
|
|
=========================
|
|
|
|
Now in terminal #4, you can run various tools to communicate with the
|
|
application running in QEMU.
|
|
|
|
You can start with pings:
|
|
|
|
.. code-block:: console
|
|
|
|
ping 192.0.2.1
|
|
ping6 2001:db8::1
|
|
|
|
You can use the netcat ("nc") utility, connecting using UDP:
|
|
|
|
.. code-block:: console
|
|
|
|
echo foobar | nc -6 -u 2001:db8::1 4242
|
|
foobar
|
|
|
|
.. code-block:: console
|
|
|
|
echo foobar | nc -u 192.0.2.1 4242
|
|
foobar
|
|
|
|
If echo_server is compiled with TCP support (now enabled by default for
|
|
the echo_server sample, CONFIG_NET_TCP=y):
|
|
|
|
.. code-block:: console
|
|
|
|
echo foobar | nc -6 -q2 2001:db8::1 4242
|
|
foobar
|
|
|
|
.. note::
|
|
|
|
Use Ctrl+C to exit.
|
|
|
|
You can also use the telnet command to achieve the above.
|
|
|
|
Step 5 - Stop supporting daemons
|
|
================================
|
|
|
|
When you are finished with network testing using QEMU, you should stop
|
|
any daemons or helpers started in the initial steps, to avoid possible
|
|
networking or routing problems such as address conflicts in local
|
|
network interfaces. For example, stop them if you switch from testing
|
|
networking with QEMU to using real hardware, or to return your host
|
|
laptop to normal Wi-Fi use.
|
|
|
|
To stop the daemons, press Ctrl+C in the corresponding terminal windows
|
|
(you need to stop both ``loop-slip-tap.sh`` and ``loop-socat.sh``).
|
|
|
|
|
|
.. _networking_internet:
|
|
|
|
Setting up Zephyr and NAT/masquerading on host to access Internet
|
|
*****************************************************************
|
|
|
|
To access the internet from a Zephyr application, some additional
|
|
setup on the host may be required. This setup is common for both
|
|
application running in QEMU and on real hardware, assuming that
|
|
a development board is connected to the development host. If a
|
|
board is connected to a dedicated router, it should not be needed.
|
|
|
|
To access the internet from a Zephyr application using IPv4,
|
|
a gateway should be set via DHCP or configured manually.
|
|
For applications using the "Settings" facility (with the config option
|
|
:option:`CONFIG_NET_CONFIG_SETTINGS` enabled),
|
|
set the :option:`CONFIG_NET_CONFIG_MY_IPV4_GW` option to the IP address
|
|
of the gateway. For apps not using the "Settings" facility, set up the
|
|
gateway by calling the :c:func:`net_if_ipv4_set_gw` at runtime.
|
|
|
|
To access the internet from a custom application running in QEMU, NAT
|
|
(masquerading) should be set up for QEMU's source address. Assuming 192.0.2.1 is
|
|
used, the following command should be run as root:
|
|
|
|
.. code-block:: console
|
|
|
|
iptables -t nat -A POSTROUTING -j MASQUERADE -s 192.0.2.1
|
|
|
|
Additionally, IPv4 forwarding should be enabled on the host, and you may need to
|
|
check that other firewall (iptables) rules don't interfere with masquerading.
|
|
To enable IPv4 forwarding the following command should be run as root:
|
|
|
|
.. code-block:: console
|
|
|
|
sysctl -w net.ipv4.ip_forward=1
|
|
|
|
Some applications may also require a DNS server. A number of Zephyr-provided
|
|
samples assume by default that the DNS server is available on the host
|
|
(IP 192.0.2.2), which, in modern Linux distributions, usually runs at least
|
|
a DNS proxy. When running with QEMU, it may be required to restart the host's
|
|
DNS, so it can serve requests on the newly created TAP interface. For example,
|
|
on Debian-based systems:
|
|
|
|
.. code-block:: console
|
|
|
|
service dnsmasq restart
|
|
|
|
An alternative to relying on the host's DNS server is to use one in the
|
|
network. For example, 8.8.8.8 is a publicly available DNS server. You can
|
|
configure it using :option:`CONFIG_DNS_SERVER1` option.
|
|
|
|
|
|
Network connection between two QEMU VMs
|
|
***************************************
|
|
|
|
Unlike the VM-to-Host setup described above, VM-to-VM setup is
|
|
automatic. For sample
|
|
applications that support this mode (such as the echo_server and echo_client
|
|
samples), you will need two terminal windows, set up for Zephyr development.
|
|
|
|
Terminal #1:
|
|
============
|
|
|
|
.. zephyr-app-commands::
|
|
:zephyr-app: samples/net/sockets/echo_server
|
|
:host-os: unix
|
|
:board: qemu_x86
|
|
:goals: build
|
|
:build-args: server
|
|
:compact:
|
|
|
|
This will start QEMU, waiting for a connection from a client QEMU.
|
|
|
|
Terminal #2:
|
|
============
|
|
|
|
.. zephyr-app-commands::
|
|
:zephyr-app: samples/net/echo_client
|
|
:host-os: unix
|
|
:board: qemu_x86
|
|
:goals: build
|
|
:build-args: client
|
|
:compact:
|
|
|
|
This will start a second QEMU instance, where you should see logging of data sent and
|
|
received in both.
|
|
|
|
Running multiple QEMU VMs of the same sample
|
|
********************************************
|
|
|
|
If you find yourself wanting to run multiple instances of the same Zephyr
|
|
sample application, which do not need to talk to each other, use the
|
|
``QEMU_INSTANCE`` argument.
|
|
|
|
Start ``socat`` and ``tunslip6`` manually (instead of using the
|
|
``loop-xxx.sh`` scripts) for as many instances as you want. Use the
|
|
following as a guide, replacing MAIN or OTHER.
|
|
|
|
Terminal #1:
|
|
============
|
|
|
|
.. code-block:: console
|
|
|
|
socat PTY,link=/tmp/slip.devMAIN UNIX-LISTEN:/tmp/slip.sockMAIN
|
|
$ZEPHYR_BASE/../net-tools/tunslip6 -t tapMAIN -T -s /tmp/slip.devMAIN \
|
|
2001:db8::1/64
|
|
# Now run Zephyr
|
|
make run QEMU_INSTANCE=MAIN
|
|
|
|
Terminal #2:
|
|
============
|
|
|
|
.. code-block:: console
|
|
|
|
socat PTY,link=/tmp/slip.devOTHER UNIX-LISTEN:/tmp/slip.sockOTHER
|
|
$ZEPHYR_BASE/../net-tools/tunslip6 -t tapOTHER -T -s /tmp/slip.devOTHER \
|
|
2001:db8::1/64
|
|
make run QEMU_INSTANCE=OTHER
|