zephyr

History

Vinayak Kariappa Chettimada 0b878020f2 samples: Bluetooth: Increase ISR_STACK_SIZE value Split Link Layer implementation uses 80 bytes more ISR stack in comparison to Legacy Link Layer, hence increase the required ISR_STACK_SIZE for the BBC micro:bit and other nRF51 QFAA SoC based mesh and mesh_demo samples. Fixes #20414. Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>		2019-12-10 15:34:26 +02:00
..
src	…
CMakeLists.txt	Bluetooth: Mesh: Same config for all nrf51_qfaa boards in sample	2019-09-11 14:04:16 +03:00
README.rst	…
microbit_gatt.conf	samples: Bluetooth: Increase ISR_STACK_SIZE value	2019-12-10 15:34:26 +02:00
nrf51_qfaa.conf	samples: Bluetooth: Increase ISR_STACK_SIZE value	2019-12-10 15:34:26 +02:00
prj.conf	Bluetooth: Mesh: Clean up sample config	2019-12-09 17:13:41 +02:00
prj_bbc_microbit.conf	samples: Bluetooth: Increase ISR_STACK_SIZE value	2019-12-10 15:34:26 +02:00
sample.yaml	…

README.rst

.. _ble_mesh:

Bluetooth: Mesh
###############

Overview
********

This sample demonstrates Bluetooth Mesh functionality. It has several
standard Mesh models, and supports provisioning over both the
Advertising and the GATT Provisioning Bearers (i.e. PB-ADV and PB-GATT).
The application also needs a functioning serial console, since that's
used for the Out-of-Band provisioning procedure.

Requirements
************

* A board with Bluetooth LE support, or
* QEMU with BlueZ running on the host

Building and Running
********************

This sample can be found under :zephyr_file:`samples/bluetooth/mesh` in the
Zephyr tree.

See :ref:`bluetooth samples section <bluetooth-samples>` for details on how
to run the sample inside QEMU.

For other boards, build and flash the application as follows:

.. zephyr-app-commands::
   :zephyr-app: samples/bluetooth/mesh
   :board: <board>
   :goals: flash
   :compact:

Refer to your :ref:`board's documentation <boards>` for alternative
flash instructions if your board doesn't support the ``flash`` target.