zephyr/drivers/sensor/mpu6050/mpu6050.h

90 lines
1.9 KiB
C

/*
* Copyright (c) 2016 Intel Corporation
*
* SPDX-License-Identifier: Apache-2.0
*/
#ifndef ZEPHYR_DRIVERS_SENSOR_MPU6050_MPU6050_H_
#define ZEPHYR_DRIVERS_SENSOR_MPU6050_MPU6050_H_
#include <device.h>
#include <drivers/gpio.h>
#include <sys/util.h>
#include <zephyr/types.h>
#define MPU6050_REG_CHIP_ID 0x75
#define MPU6050_CHIP_ID 0x68
#define MPU6050_REG_GYRO_CFG 0x1B
#define MPU6050_GYRO_FS_SHIFT 3
#define MPU6050_REG_ACCEL_CFG 0x1C
#define MPU6050_ACCEL_FS_SHIFT 3
#define MPU6050_REG_INT_EN 0x38
#define MPU6050_DRDY_EN BIT(0)
#define MPU6050_REG_DATA_START 0x3B
#define MPU6050_REG_PWR_MGMT1 0x6B
#define MPU6050_SLEEP_EN BIT(6)
/* measured in degrees/sec x10 to avoid floating point */
static const uint16_t mpu6050_gyro_sensitivity_x10[] = {
1310, 655, 328, 164
};
struct mpu6050_data {
const struct device *i2c;
int16_t accel_x;
int16_t accel_y;
int16_t accel_z;
uint16_t accel_sensitivity_shift;
int16_t temp;
int16_t gyro_x;
int16_t gyro_y;
int16_t gyro_z;
uint16_t gyro_sensitivity_x10;
#ifdef CONFIG_MPU6050_TRIGGER
const struct device *dev;
const struct device *gpio;
struct gpio_callback gpio_cb;
struct sensor_trigger data_ready_trigger;
sensor_trigger_handler_t data_ready_handler;
#if defined(CONFIG_MPU6050_TRIGGER_OWN_THREAD)
K_KERNEL_STACK_MEMBER(thread_stack, CONFIG_MPU6050_THREAD_STACK_SIZE);
struct k_thread thread;
struct k_sem gpio_sem;
#elif defined(CONFIG_MPU6050_TRIGGER_GLOBAL_THREAD)
struct k_work work;
#endif
#endif /* CONFIG_MPU6050_TRIGGER */
};
struct mpu6050_config {
const char *i2c_label;
uint16_t i2c_addr;
#ifdef CONFIG_MPU6050_TRIGGER
uint8_t int_pin;
uint8_t int_flags;
const char *int_label;
#endif /* CONFIG_MPU6050_TRIGGER */
};
#ifdef CONFIG_MPU6050_TRIGGER
int mpu6050_trigger_set(const struct device *dev,
const struct sensor_trigger *trig,
sensor_trigger_handler_t handler);
int mpu6050_init_interrupt(const struct device *dev);
#endif
#endif /* __SENSOR_MPU6050__ */