411 lines
10 KiB
C
411 lines
10 KiB
C
/* pci_interface.c - PCI bus support */
|
|
|
|
/*
|
|
* Copyright (c) 2009-2011, 2013-2014 Wind River Systems, Inc.
|
|
*
|
|
* Licensed under the Apache License, Version 2.0 (the "License");
|
|
* you may not use this file except in compliance with the License.
|
|
* You may obtain a copy of the License at
|
|
*
|
|
* http://www.apache.org/licenses/LICENSE-2.0
|
|
*
|
|
* Unless required by applicable law or agreed to in writing, software
|
|
* distributed under the License is distributed on an "AS IS" BASIS,
|
|
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
|
|
* See the License for the specific language governing permissions and
|
|
* limitations under the License.
|
|
*/
|
|
|
|
/*
|
|
* DESCRIPTION
|
|
*
|
|
* This module implements the PCI H/W access functions.
|
|
*/
|
|
|
|
#include <nanokernel.h>
|
|
#include <arch/cpu.h>
|
|
|
|
#include <pci/pci_mgr.h>
|
|
#include <string.h>
|
|
#include <board.h>
|
|
|
|
#if (PCI_CTRL_ADDR_REG == 0)
|
|
#error "PCI_CTRL_ADDR_REG cannot be zero"
|
|
#endif
|
|
|
|
#if (PCI_CTRL_DATA_REG == 0)
|
|
#error "PCI_CTRL_DATA_REG cannot be zero"
|
|
#endif
|
|
|
|
/**
|
|
*
|
|
* @brief Read a PCI controller register
|
|
*
|
|
* @param reg PCI register to read
|
|
* @param data where to put the data
|
|
* @param size size of the data to read (8/16/32 bits)
|
|
*
|
|
* This routine reads the specified register from the PCI controller and
|
|
* places the data into the provided buffer.
|
|
*
|
|
* @return N/A
|
|
*
|
|
*/
|
|
|
|
static void pci_ctrl_read(uint32_t reg, uint32_t *data, uint32_t size)
|
|
{
|
|
/* read based on the size requested */
|
|
|
|
switch (size) {
|
|
/* long (32 bits) */
|
|
case SYS_PCI_ACCESS_32BIT:
|
|
*data = sys_in32(reg);
|
|
break;
|
|
/* word (16 bits) */
|
|
case SYS_PCI_ACCESS_16BIT:
|
|
*data = sys_in16(reg);
|
|
break;
|
|
/* byte (8 bits) */
|
|
case SYS_PCI_ACCESS_8BIT:
|
|
*data = sys_in8(reg);
|
|
break;
|
|
}
|
|
}
|
|
|
|
/**
|
|
*
|
|
* @brief Write a PCI controller register
|
|
*
|
|
* @param reg PCI register to write
|
|
* @param data data to write
|
|
* @param size size of the data to write (8/16/32 bits)
|
|
*
|
|
* This routine writes the provided data to the specified register in the PCI
|
|
* controller.
|
|
*
|
|
* @return N/A
|
|
*
|
|
*/
|
|
|
|
static void pci_ctrl_write(uint32_t reg, uint32_t data, uint32_t size)
|
|
{
|
|
/* write based on the size requested */
|
|
|
|
switch (size) {
|
|
/* long (32 bits) */
|
|
case SYS_PCI_ACCESS_32BIT:
|
|
sys_out32(data, reg);
|
|
break;
|
|
/* word (16 bits) */
|
|
case SYS_PCI_ACCESS_16BIT:
|
|
sys_out16(data, reg);
|
|
break;
|
|
/* byte (8 bits) */
|
|
case SYS_PCI_ACCESS_8BIT:
|
|
sys_out8(data, reg);
|
|
break;
|
|
}
|
|
}
|
|
|
|
/**
|
|
*
|
|
* @brief Read the PCI controller data register
|
|
*
|
|
* @param controller controller number
|
|
* @param offset is the offset within the data region
|
|
* @param data is the returned data
|
|
* @param size is the size of the data to read
|
|
*
|
|
* This routine reads the data register of the specified PCI controller.
|
|
*
|
|
* @return 0 or -1
|
|
*
|
|
*/
|
|
|
|
static int pci_ctrl_data_read(uint32_t controller, uint32_t offset,
|
|
uint32_t *data, uint32_t size)
|
|
{
|
|
/* we only support one controller */
|
|
|
|
if (controller != DEFAULT_PCI_CONTROLLER) {
|
|
return (-1);
|
|
}
|
|
|
|
pci_ctrl_read(PCI_CTRL_DATA_REG + offset, data, size);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
*
|
|
* @brief Write the PCI controller data register
|
|
*
|
|
* @param controller the controller number
|
|
* @param offset is the offset within the address register
|
|
* @param data is the data to write
|
|
* @param size is the size of the data
|
|
*
|
|
* This routine writes the provided data to the data register of the
|
|
* specified PCI controller.
|
|
*
|
|
* @return 0 or -1
|
|
*
|
|
*/
|
|
|
|
static int pci_ctrl_data_write(uint32_t controller, uint32_t offset,
|
|
uint32_t data, uint32_t size)
|
|
{
|
|
/* we only support one controller */
|
|
|
|
if (controller != DEFAULT_PCI_CONTROLLER) {
|
|
return (-1);
|
|
}
|
|
|
|
pci_ctrl_write(PCI_CTRL_DATA_REG + offset, data, size);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
*
|
|
* @brief Write the PCI controller address register
|
|
*
|
|
* @param controller is the controller number
|
|
* @param offset is the offset within the address register
|
|
* @param data is the data to write
|
|
* @param size is the size of the data
|
|
*
|
|
* This routine writes the provided data to the address register of the
|
|
* specified PCI controller.
|
|
*
|
|
* @return 0 or -1
|
|
*
|
|
*/
|
|
|
|
static int pci_ctrl_addr_write(uint32_t controller, uint32_t offset,
|
|
uint32_t data, uint32_t size)
|
|
{
|
|
/* we only support one controller */
|
|
|
|
if (controller != DEFAULT_PCI_CONTROLLER) {
|
|
return (-1);
|
|
}
|
|
|
|
pci_ctrl_write(PCI_CTRL_ADDR_REG + offset, data, size);
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
*
|
|
* @brief Read a PCI register from a device
|
|
*
|
|
* This routine reads data from a PCI device's configuration space. The
|
|
* device and register to read is specified by the address parameter ("addr")
|
|
* and must be set appropriately by the caller. The address is defined by
|
|
* the structure type pci_addr_t and contains the following members:
|
|
*
|
|
* bus: PCI bus number (0-255)
|
|
* device: PCI device number (0-31)
|
|
* func: device function number (0-7)
|
|
* reg: device 32-bit register number to read (0-63)
|
|
* offset: offset within 32-bit register to read (0-3)
|
|
*
|
|
* The size parameter specifies the number of bytes to read from the PCI
|
|
* configuration space, valid values are 1, 2, and 4 bytes. A 32-bit value
|
|
* is always returned but it will contain only the number of bytes specified
|
|
* by the size parameter.
|
|
*
|
|
* If multiple PCI controllers are present in the system, the controller id
|
|
* can be specified in the "controller" parameter. If only one controller
|
|
* is present, the id DEFAULT_PCI_CONTROLLER can be used to denote this
|
|
* controller.
|
|
*
|
|
* Example:
|
|
*
|
|
* union pci_addr_reg addr;
|
|
* uint32_t status;
|
|
*
|
|
* addr.field.bus = 0; /@ PCI bus zero @/
|
|
* addr.field.device = 1; /@ PCI device one @/
|
|
* addr.field.func = 0; /@ PCI function zero @/
|
|
* addr.field.reg = 4; /@ PCI register 4 @/
|
|
* addr.field.offset = 0; /@ PCI register offset @/
|
|
*
|
|
* pci_read (DEFAULT_PCI_CONTROLLER, addr, sizeof(uint16_t), &status);
|
|
*
|
|
*
|
|
* NOTE:
|
|
* Reading of PCI data must be performed as an atomic operation. It is up to
|
|
* the caller to enforce this.
|
|
*
|
|
* @param controller is the PCI controller number to use
|
|
* @param addr is the PCI address to read
|
|
* @param size is the size of the data in bytes
|
|
* @param data is a pointer to the data read from the device
|
|
*
|
|
* @return N/A
|
|
*
|
|
*/
|
|
|
|
void pci_read(uint32_t controller, union pci_addr_reg addr,
|
|
uint32_t size, uint32_t *data)
|
|
{
|
|
uint32_t access_size;
|
|
uint32_t access_offset;
|
|
|
|
/* validate the access size */
|
|
|
|
switch (size) {
|
|
case 1:
|
|
access_size = SYS_PCI_ACCESS_8BIT;
|
|
access_offset = addr.field.offset;
|
|
break;
|
|
case 2:
|
|
access_size = SYS_PCI_ACCESS_16BIT;
|
|
access_offset = addr.field.offset;
|
|
break;
|
|
case 4:
|
|
default:
|
|
access_size = SYS_PCI_ACCESS_32BIT;
|
|
access_offset = 0;
|
|
break;
|
|
}
|
|
|
|
/* ensure enable has been set */
|
|
|
|
addr.field.enable = 1;
|
|
|
|
/* clear the offset for the address register */
|
|
|
|
addr.field.offset = 0;
|
|
|
|
/* read the data from the PCI controller */
|
|
|
|
pci_ctrl_addr_write(
|
|
controller, PCI_NO_OFFSET, addr.value, SYS_PCI_ACCESS_32BIT);
|
|
|
|
pci_ctrl_data_read(controller, access_offset, data, access_size);
|
|
}
|
|
|
|
/**
|
|
*
|
|
* @brief Write a to a PCI register
|
|
*
|
|
* This routine writes data to a PCI device's configuration space. The
|
|
* device and register to write is specified by the address parameter ("addr")
|
|
* and must be set appropriately by the caller. The address is defined by
|
|
* the structure type pci_addr_t and contains the following members:
|
|
*
|
|
* bus: PCI bus number (0-255)
|
|
* device: PCI device number (0-31)
|
|
* func: device function number (0-7)
|
|
* reg: device register number to read (0-63)
|
|
* offset: offset within 32-bit register to write (0-3)
|
|
*
|
|
* The size parameter specifies the number of bytes to write to the PCI
|
|
* configuration space, valid values are 1, 2, and 4 bytes. A 32-bit value
|
|
* is always provided but only the number of bytes specified by the size
|
|
* parameter will be written to the device.
|
|
*
|
|
* If multiple PCI controllers are present in the system, the controller id
|
|
* can be specified in the "controller" parameter. If only one controller
|
|
* is present, the id DEFAULT_PCI_CONTROLLER can be used to denote this
|
|
* controller.
|
|
*
|
|
* Example:
|
|
*
|
|
* pci_addr_t addr;
|
|
* uint32_t bar0 = 0xE0000000;
|
|
*
|
|
* addr.field.bus = 0; /@ PCI bus zero @/
|
|
* addr.field.device = 1; /@ PCI device one @/
|
|
* addr.field.func = 0; /@ PCI function zero @/
|
|
* addr.field.reg = 16; /@ PCI register 16 @/
|
|
* addr.field.offset = 0; /@ PCI register offset @/
|
|
*
|
|
* pci_write (DEFAULT_PCI_CONTROLLER, addr, sizeof(uint32_t), bar0);
|
|
*
|
|
* NOTE:
|
|
* Writing of PCI data must be performed as an atomic operation. It is up to
|
|
* the caller to enforce this.
|
|
*
|
|
* @param controller is the PCI controller to use
|
|
* @param addr is the PCI addres to read
|
|
* @param size is the size in bytes to write
|
|
* @param data is the data to write
|
|
*
|
|
* @return N/A
|
|
*
|
|
*/
|
|
|
|
void pci_write(uint32_t controller, union pci_addr_reg addr,
|
|
uint32_t size, uint32_t data)
|
|
{
|
|
uint32_t access_size;
|
|
uint32_t access_offset;
|
|
|
|
/* validate the access size */
|
|
|
|
switch (size) {
|
|
case 1:
|
|
access_size = SYS_PCI_ACCESS_8BIT;
|
|
access_offset = addr.field.offset;
|
|
break;
|
|
case 2:
|
|
access_size = SYS_PCI_ACCESS_16BIT;
|
|
access_offset = addr.field.offset;
|
|
break;
|
|
case 4:
|
|
default:
|
|
access_size = SYS_PCI_ACCESS_32BIT;
|
|
access_offset = 0;
|
|
break;
|
|
}
|
|
|
|
/* ensure enable has been set */
|
|
|
|
addr.field.enable = 1;
|
|
|
|
/* clear the offset for the address register */
|
|
|
|
addr.field.offset = 0;
|
|
|
|
/* write the data to the PCI controller */
|
|
|
|
pci_ctrl_addr_write(
|
|
controller, PCI_NO_OFFSET, addr.value, SYS_PCI_ACCESS_32BIT);
|
|
pci_ctrl_data_write(controller, access_offset, data, access_size);
|
|
}
|
|
|
|
/**
|
|
*
|
|
* @brief Get the PCI header for a device
|
|
*
|
|
* This routine reads the PCI header for the specified device and puts the
|
|
* result in the supplied header structure.
|
|
*
|
|
* @return N/A
|
|
*/
|
|
|
|
void pci_header_get(uint32_t controller,
|
|
union pci_addr_reg pci_ctrl_addr,
|
|
union pci_dev *pci_dev_header)
|
|
{
|
|
uint32_t i;
|
|
|
|
/* clear out the header */
|
|
|
|
memset((char *)pci_dev_header, sizeof(union pci_dev), 0);
|
|
|
|
/* fill in the PCI header from the device */
|
|
|
|
for (i = 0; i < PCI_HEADER_WORDS; i++) {
|
|
pci_ctrl_addr.field.reg = i;
|
|
pci_read(controller,
|
|
pci_ctrl_addr,
|
|
sizeof(uint32_t),
|
|
&pci_dev_header->words.word[i]);
|
|
}
|
|
}
|
|
|