OrgZephyr/zephyr
OrgZephyr
/
zephyr
mirror of https://github.com/zephyrproject-rtos/zephyr.git
1
0
Fork 0
Code Issues Releases Wiki Activity
zephyr/dts/arm/nxp/nxp_ke1xf.dtsi

455 lines
10 KiB
Plaintext
Raw Blame History

/*
* Copyright (c) 2019 Vestas Wind Systems A/S
*
* SPDX-License-Identifier: Apache-2.0
*/
#include <arm/armv7-m.dtsi>
#include <dt-bindings/clock/kinetis_pcc.h>
#include <dt-bindings/clock/kinetis_scg.h>
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/i2c/i2c.h>
/ {
aliases {
watchdog0 = &wdog;
};
chosen {
zephyr,flash-controller = &ftfe;
};
cpus {
#address-cells = <1>;
#size-cells = <0>;
cpu@0 {
device_type = "cpu";
compatible = "arm,cortex-m4f";
reg = <0>;
};
};
temp0: temp0 {
compatible = "nxp,kinetis-temperature";
io-channels = <&adc0 26>, <&adc0 27>;
io-channel-names = "SENSOR", "BANDGAP";
bandgap-voltage = <1000000>;
vtemp25 = <740500>;
sensor-slope-cold = <1564>;
sensor-slope-hot = <1564>;
label = "TEMP0";
status = "disabled";
};
temp1: temp1 {
compatible = "nxp,kinetis-temperature";
io-channels = <&adc1 26>, <&adc1 27>;
io-channel-names = "SENSOR", "BANDGAP";
bandgap-voltage = <1000000>;
vtemp25 = <740500>;
sensor-slope-cold = <1564>;
sensor-slope-hot = <1564>;
label = "TEMP1";
status = "disabled";
};
temp2: temp2 {
compatible = "nxp,kinetis-temperature";
io-channels = <&adc2 26>, <&adc2 27>;
io-channel-names = "SENSOR", "BANDGAP";
bandgap-voltage = <1000000>;
vtemp25 = <740500>;
sensor-slope-cold = <1564>;
sensor-slope-hot = <1564>;
label = "TEMP2";
status = "disabled";
};
soc {
edma: dma-controller@40008000 {
compatible = "nxp,mcux-edma";
dma-channels = <16>;
dma-requests = <64>;
nxp,mem2mem;
reg = <0x40008000 0x1000>, <0x40021000 0x1000>;
interrupts = <0 0>, <1 0>, <2 0>, <3 0>,
<4 0>, <5 0>, <6 0>, <7 0>,
<8 0>, <9 0>, <10 0>, <11 0>,
<12 0>, <13 0>, <14 0>, <15 0>,
<16 0>;
status = "disabled";
label = "EDMA";
#dma-cells = <2>;
};
mpu: mpu@4000d000 {
compatible = "nxp,kinetis-mpu";
reg = <0x4000d000 0x1000>;
status = "disabled";
};
sim: sim@40048000 {
compatible = "nxp,kinetis-ke1xf-sim";
reg = <0x40048000 0x1000>;
label = "SIM";
};
scg: scg@40064000 {
compatible = "nxp,kinetis-scg";
reg = <0x40064000 0x1000>;
label = "SCG";
#clock-cells = <1>;
};
pmc: pmc@4007d000 {
reg = <0x4007d000 0x1000>;
label = "PMC";
lpo: lpo128k {
/* LPO clock */
compatible = "fixed-clock";
clock-frequency = <128000>;
#clock-cells = <0>;
};
};
pcc: pcc@40065000 {
compatible = "nxp,kinetis-pcc";
reg = <0x40065000 0x1000>;
label = "PCC";
#clock-cells = <2>;
};
rtc: rtc@4003d000 {
compatible = "nxp,kinetis-rtc";
reg = <0x4003d000 0x1000>;
interrupts = <46 0>, <47 0>;
interrupt-names = "alarm", "seconds";
clock-frequency = <32768>;
prescaler = <32768>;
label = "RTC_0";
};
dac0: dac@4003f000 {
compatible = "nxp,kinetis-dac32";
reg = <0x4003f000 0x1000>;
interrupts = <56 0>;
clocks = <&scg KINETIS_SCG_BUS_CLK>;
voltage-reference = <1>;
buffered;
label = "DAC_0";
status = "disabled";
#io-channel-cells = <1>;
};
lptmr0: lptmr@40040000 {
compatible = "nxp,kinetis-lptmr";
reg = <0x40040000 0x1000>;
interrupts = <58 0>;
clock-frequency = <128000>;
prescaler = <1>;
clk-source = <1>;
label = "LPTMR_0";
};
wdog: watchdog@40052000 {
compatible = "nxp,kinetis-wdog32";
reg = <0x40052000 0x1000>;
interrupts = <22 0>;
clocks = <&lpo>;
clk-source = <1>;
clk-divider = <256>;
label = "WDT_0";
};
ftfe: flash-controller@40020000 {
compatible = "nxp,kinetis-ftfe";
label = "FLASH_CTRL";
reg = <0x40020000 0x1000>;
interrupts = <18 0>, <19 0>;
interrupt-names = "command-complete", "read-collision";
#address-cells = <1>;
#size-cells = <1>;
};
lpuart0: uart@4006a000 {
compatible = "nxp,kinetis-lpuart";
reg = <0x4006a000 0x1000>;
interrupts = <31 0>, <32 0>;
interrupt-names = "transmit", "receive";
clocks = <&pcc 0x1a8 KINETIS_PCC_SRC_FIRC_ASYNC>;
label = "UART_0";
status = "disabled";
};
lpuart1: uart@4006b000 {
compatible = "nxp,kinetis-lpuart";
reg = <0x4006b000 0x1000>;
interrupts = <33 0>, <34 0>;
interrupt-names = "transmit", "receive";
clocks = <&pcc 0x1ac KINETIS_PCC_SRC_FIRC_ASYNC>;
label = "UART_1";
status = "disabled";
};
lpuart2: uart@4006c000 {
compatible = "nxp,kinetis-lpuart";
reg = <0x4006c000 0x1000>;
interrupts = <35 0>, <36 0>;
interrupt-names = "transmit", "receive";
clocks = <&pcc 0x1b0 KINETIS_PCC_SRC_FIRC_ASYNC>;
label = "UART_2";
status = "disabled";
};
lpi2c0: i2c@40066000 {
compatible = "nxp,imx-lpi2c";
clock-frequency = <I2C_BITRATE_STANDARD>;
#address-cells = <1>;
#size-cells = <0>;
reg = <0x40066000 0x1000>;
interrupts = <24 0>;
clocks = <&pcc 0x198 KINETIS_PCC_SRC_FIRC_ASYNC>;
label = "I2C_0";
status = "disabled";
};
lpi2c1: i2c@40067000 {
compatible = "nxp,imx-lpi2c";
clock-frequency = <I2C_BITRATE_STANDARD>;
#address-cells = <1>;
#size-cells = <0>;
reg = <0x40067000 0x1000>;
interrupts = <25 0>;
clocks = <&pcc 0x19c KINETIS_PCC_SRC_FIRC_ASYNC>;
label = "I2C_1";
status = "disabled";
};
lpspi0: spi@4002c000 {
compatible = "nxp,imx-lpspi";
reg = <0x4002c000 0x1000>;
interrupts = <26 0>;
clocks = <&pcc 0xb0 KINETIS_PCC_SRC_FIRC_ASYNC>;
label = "SPI_0";
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
};
lpspi1: spi@4002d000 {
compatible = "nxp,imx-lpspi";
reg = <0x4002d000 0x1000>;
interrupts = <27 0>;
clocks = <&pcc 0xb4 KINETIS_PCC_SRC_FIRC_ASYNC>;
label = "SPI_1";
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
};
flexcan0: can@40024000 {
compatible = "nxp,kinetis-flexcan";
reg = <0x40024000 0x1000>;
interrupts = <78 0>, <79 0>, <80 0>, <81 0>;
interrupt-names = "warning", "error", "wake-up",
"mb-0-15";
clocks = <&scg KINETIS_SCG_BUS_CLK>;
clk-source = <1>;
label = "CAN_0";
sjw = <1>;
prop-seg = <1>;
phase-seg1 = <3>;
phase-seg2 = <2>;
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
};
flexcan1: can@40025000 {
compatible = "nxp,kinetis-flexcan";
reg = <0x40025000 0x1000>;
interrupts = <85 0>, <86 0>, <87 0>, <88 0>;
interrupt-names = "warning", "error", "wake-up",
"mb-0-15";
clocks = <&scg KINETIS_SCG_BUS_CLK>;
clk-source = <1>;
label = "CAN_1";
sjw = <1>;
prop-seg = <1>;
phase-seg1 = <3>;
phase-seg2 = <2>;
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
};
porta: pinmux@40049000 {
compatible = "nxp,kinetis-pinmux";
reg = <0x40049000 0x1000>;
clocks = <&pcc 0x124 KINETIS_PCC_SRC_NONE_OR_EXT>;
};
portb: pinmux@4004a000 {
compatible = "nxp,kinetis-pinmux";
reg = <0x4004a000 0x1000>;
clocks = <&pcc 0x128 KINETIS_PCC_SRC_NONE_OR_EXT>;
};
portc: pinmux@4004b000 {
compatible = "nxp,kinetis-pinmux";
reg = <0x4004b000 0x1000>;
clocks = <&pcc 0x12c KINETIS_PCC_SRC_NONE_OR_EXT>;
};
portd: pinmux@4004c000 {
compatible = "nxp,kinetis-pinmux";
reg = <0x4004c000 0x1000>;
clocks = <&pcc 0x130 KINETIS_PCC_SRC_NONE_OR_EXT>;
};
porte: pinmux@4004d000 {
compatible = "nxp,kinetis-pinmux";
reg = <0x4004d000 0x1000>;
clocks = <&pcc 0x134 KINETIS_PCC_SRC_NONE_OR_EXT>;
};
gpioa: gpio@400ff000 {
compatible = "nxp,kinetis-gpio";
status = "disabled";
reg = <0x400ff000 0x40>;
interrupts = <59 2>;
label = "GPIO_0";
gpio-controller;
#gpio-cells = <2>;
nxp,kinetis-port = <&porta>;
};
gpiob: gpio@400ff040 {
compatible = "nxp,kinetis-gpio";
status = "disabled";
reg = <0x400ff040 0x40>;
interrupts = <60 2>;
label = "GPIO_1";
gpio-controller;
#gpio-cells = <2>;
nxp,kinetis-port = <&portb>;
};
gpioc: gpio@400ff080 {
compatible = "nxp,kinetis-gpio";
status = "disabled";
reg = <0x400ff080 0x40>;
interrupts = <61 2>;
label = "GPIO_2";
gpio-controller;
#gpio-cells = <2>;
nxp,kinetis-port = <&portc>;
};
gpiod: gpio@400ff0c0 {
compatible = "nxp,kinetis-gpio";
status = "disabled";
reg = <0x400ff0c0 0x40>;
interrupts = <62 2>;
label = "GPIO_3";
gpio-controller;
#gpio-cells = <2>;
nxp,kinetis-port = <&portd>;
};
gpioe: gpio@400ff100 {
compatible = "nxp,kinetis-gpio";
status = "disabled";
reg = <0x400ff100 0x40>;
interrupts = <63 2>;
label = "GPIO_4";
gpio-controller;
#gpio-cells = <2>;
nxp,kinetis-port = <&porte>;
};
adc0: adc@4003b000 {
compatible = "nxp,kinetis-adc12";
reg = <0x4003b000 0x1000>;
interrupts = <39 0>;
clocks = <&pcc 0xec KINETIS_PCC_SRC_FIRC_ASYNC>;
label = "ADC_0";
clk-source = <0>;
clk-divider = <1>;
status = "disabled";
#io-channel-cells = <1>;
};
adc1: adc@40027000 {
compatible = "nxp,kinetis-adc12";
reg = <0x40027000 0x1000>;
interrupts = <73 0>;
clocks = <&pcc 0x9c KINETIS_PCC_SRC_FIRC_ASYNC>;
label = "ADC_1";
clk-source = <0>;
clk-divider = <1>;
status = "disabled";
#io-channel-cells = <1>;
};
adc2: adc@4003c000 {
compatible = "nxp,kinetis-adc12";
reg = <0x4003c000 0x1000>;
interrupts = <74 0>;
clocks = <&pcc 0xf0 KINETIS_PCC_SRC_FIRC_ASYNC>;
label = "ADC_2";
clk-source = <0>;
clk-divider = <1>;
status = "disabled";
#io-channel-cells = <1>;
};
ftm0: ftm@40038000 {
compatible = "nxp,kinetis-ftm";
reg = <0x40038000 0x1000>;
interrupts = <42 0>;
clocks = <&pcc 0xe0 KINETIS_PCC_SRC_FIRC_ASYNC>;
prescaler = <16>;
label = "FTM_0";
status = "disabled";
};
ftm1: ftm@40039000 {
compatible = "nxp,kinetis-ftm";
reg = <0x40039000 0x1000>;
interrupts = <43 0>;
clocks = <&pcc 0xe4 KINETIS_PCC_SRC_FIRC_ASYNC>;
prescaler = <16>;
label = "FTM_1";
status = "disabled";
};
ftm2: ftm@4003a000 {
compatible = "nxp,kinetis-ftm";
reg = <0x4003a000 0x1000>;
interrupts = <44 0>;
clocks = <&pcc 0xe8 KINETIS_PCC_SRC_FIRC_ASYNC>;
prescaler = <16>;
label = "FTM_2";
status = "disabled";
};
ftm3: ftm@40026000 {
compatible = "nxp,kinetis-ftm";
reg = <0x40026000 0x1000>;
interrupts = <71 0>;
clocks = <&pcc 0x98 KINETIS_PCC_SRC_FIRC_ASYNC>;
prescaler = <16>;
label = "FTM_3";
status = "disabled";
};
};
};
&nvic {
arm,num-irq-priority-bits = <4>;
};
Reference in New Issue View Git Blame Copy Permalink