49 lines
1.2 KiB
ReStructuredText
49 lines
1.2 KiB
ReStructuredText
Description
|
|
===========
|
|
|
|
zperf is a network traffic generator for Zephyr that may be used to
|
|
evaluate network bandwidth.
|
|
|
|
Features
|
|
=========
|
|
|
|
- Compatible with iPerf_2.0.5.
|
|
- Client or server mode allowed without need to modify the source code.
|
|
- Working with task profiler (PROFILER=1 to be set when building zperf)
|
|
|
|
Supported Boards
|
|
================
|
|
|
|
zperf is board-agnostic. However, zperf requires a network interface.
|
|
So far, zperf has been tested only on the Intel Galileo Development Board.
|
|
|
|
Usage
|
|
=====
|
|
|
|
If the zephyr is a client, then you can start the iperf in host with these
|
|
command line options if you want to test UDP:
|
|
|
|
$ iperf -s -l 1K -u -V -B 2001:db8::2
|
|
|
|
In zephyr start zperf like this
|
|
|
|
zperf> udp.upload 2001:db8::2 5001 10 1K 1M
|
|
|
|
or if you have set the zephyr and peer host IP addresses in config file,
|
|
then you can simply say
|
|
|
|
zperf> udp.upload2 v6 10 1K 1M
|
|
|
|
|
|
If the zephyr is acting as a server, then first start zephyr in download
|
|
mode like this:
|
|
|
|
zperf> udp.download 5001
|
|
|
|
and in host side start iperf like this
|
|
|
|
$ iperf -l 1K -u -V -c 2001:db8::1 -p 5001
|
|
|
|
Note the you might need to rate limit the output using -b option
|
|
if zephyr is not able to receive all the packets in orderly manner.
|