98 lines
2.9 KiB
Plaintext
98 lines
2.9 KiB
Plaintext
# Copyright 2022-2023 NXP
|
|
# SPDX-License-Identifier: Apache-2.0
|
|
|
|
menuconfig ETH_NXP_S32_GMAC
|
|
bool "NXP S32 GMAC driver"
|
|
default y
|
|
depends on DT_HAS_NXP_S32_GMAC_ENABLED
|
|
select NOCACHE_MEMORY if ARCH_HAS_NOCACHE_MEMORY_SUPPORT
|
|
select PINCTRL
|
|
help
|
|
Enable GMAC/EMAC Ethernet driver for NXP S32 SoCs.
|
|
|
|
if ETH_NXP_S32_GMAC
|
|
|
|
config ETH_NXP_S32_TX_RING_LEN
|
|
int "TX ring length"
|
|
default 4
|
|
range 4 128
|
|
help
|
|
Length of the TX ring. ETH_NXP_S32_TX_RING_BUF_SIZE * ETH_NXP_S32_TX_RING_LEN
|
|
must be a multiple of TX FIFO block size.
|
|
|
|
config ETH_NXP_S32_TX_RING_BUF_SIZE
|
|
int "TX ring data buffer size"
|
|
default 1536
|
|
range 64 1536
|
|
help
|
|
Size, in bytes, of the TX data buffer. The size must be big enough to
|
|
store one complete Ethernet frame, and be a multiple of the data bus
|
|
width.
|
|
|
|
config ETH_NXP_S32_RX_RING_LEN
|
|
int "RX ring length"
|
|
default 4
|
|
range 4 128
|
|
help
|
|
Length of the RX ring. ETH_NXP_S32_RX_RING_BUF_SIZE * ETH_NXP_S32_RX_RING_LEN
|
|
must be a multiple of RX FIFO block size.
|
|
|
|
config ETH_NXP_S32_RX_RING_BUF_SIZE
|
|
int "RX ring data buffer size"
|
|
default 1536
|
|
range 64 1536
|
|
help
|
|
Size, in bytes, of the RX data buffer. The size must be big enough to
|
|
store one complete Ethernet frame, and be a multiple of the data bus
|
|
width.
|
|
|
|
config ETH_NXP_S32_CLOCK_CONFIG_IDX
|
|
int
|
|
default 1
|
|
help
|
|
This option specifies the zero-based index of the clock configuration
|
|
used to initialize the GMAC/EMAC clocks.
|
|
|
|
config ETH_NXP_S32_RX_THREAD_PRIO
|
|
int "RX thread priority"
|
|
default 2
|
|
help
|
|
RX thread priority. RX thread is a cooperative thread.
|
|
|
|
config ETH_NXP_S32_RX_THREAD_STACK_SIZE
|
|
int "RX thread stack size"
|
|
default 1500
|
|
help
|
|
RX thread stack size.
|
|
|
|
config ETH_NXP_S32_RX_BUDGET
|
|
int "RX thread budget"
|
|
default 128
|
|
range 1 1024
|
|
help
|
|
The budget parameter places a limit on the amount of work the driver
|
|
may do in the RX thread before yielding the processor, in case there
|
|
is more work to do. This is to prevent the RX thread to starve other
|
|
threads. Each received frame counts as one unit of work.
|
|
|
|
config ETH_NXP_S32_LOOPBACK
|
|
bool "MAC loopback"
|
|
help
|
|
MAC operates in loopback mode. The data is looped back through
|
|
internal FIFO on to the internal MII/GMII interface, passing through
|
|
the corresponding transmit PHY interface block.
|
|
This mode requires the MII/GMII Rx clock input signal to function
|
|
properly because the transmit clock is not internally looped back.
|
|
|
|
config ETH_NXP_S32_MULTICAST_FILTER
|
|
bool "Multicast destination address filtering"
|
|
help
|
|
Enable support for multicast destination address filtering in the MAC.
|
|
MAC performs imperfect filtering using a 64-bit hash table. The upper
|
|
6-bits CRC of the received multicast address is used as index to the
|
|
content of the hash table. Only multicast with the computed hash set
|
|
in the multicast table will be received and all other multicast is
|
|
dropped by the MAC. If disabled, all multicast is received by the MAC.
|
|
|
|
endif # ETH_NXP_S32_GMAC
|