1370 lines
30 KiB
C
1370 lines
30 KiB
C
/*
|
|
* Copyright (c) 2019-2020 Peter Bigot Consulting, LLC
|
|
*
|
|
* SPDX-License-Identifier: Apache-2.0
|
|
*/
|
|
|
|
#define DT_DRV_COMPAT maxim_ds3231
|
|
|
|
#include <device.h>
|
|
#include <drivers/rtc/maxim_ds3231.h>
|
|
#include <drivers/gpio.h>
|
|
#include <drivers/i2c.h>
|
|
#include <kernel.h>
|
|
#include <logging/log.h>
|
|
#include <sys/timeutil.h>
|
|
#include <sys/util.h>
|
|
|
|
LOG_MODULE_REGISTER(DS3231, CONFIG_COUNTER_LOG_LEVEL);
|
|
|
|
#define REG_MONCEN_CENTURY 0x80
|
|
#define REG_HOURS_12H 0x40
|
|
#define REG_HOURS_PM 0x20
|
|
#define REG_HOURS_20 0x20
|
|
#define REG_HOURS_10 0x20
|
|
#define REG_DAYDATE_DOW 0x40
|
|
#define REG_ALARM_IGN 0x80
|
|
|
|
enum {
|
|
SYNCSM_IDLE,
|
|
SYNCSM_PREP_READ,
|
|
SYNCSM_FINISH_READ,
|
|
SYNCSM_PREP_WRITE,
|
|
SYNCSM_FINISH_WRITE,
|
|
};
|
|
|
|
struct register_map {
|
|
uint8_t sec;
|
|
uint8_t min;
|
|
uint8_t hour;
|
|
uint8_t dow;
|
|
uint8_t dom;
|
|
uint8_t moncen;
|
|
uint8_t year;
|
|
|
|
struct {
|
|
uint8_t sec;
|
|
uint8_t min;
|
|
uint8_t hour;
|
|
uint8_t date;
|
|
} __packed alarm1;
|
|
|
|
struct {
|
|
uint8_t min;
|
|
uint8_t hour;
|
|
uint8_t date;
|
|
} __packed alarm2;
|
|
|
|
uint8_t ctrl;
|
|
uint8_t ctrl_stat;
|
|
uint8_t aging;
|
|
int8_t temp_units;
|
|
uint8_t temp_frac256;
|
|
};
|
|
|
|
struct gpios {
|
|
const char *ctrl;
|
|
gpio_pin_t pin;
|
|
gpio_dt_flags_t flags;
|
|
};
|
|
|
|
struct ds3231_config {
|
|
/* Common structure first because generic API expects this here. */
|
|
struct counter_config_info generic;
|
|
const char *bus_name;
|
|
struct gpios isw_gpios;
|
|
uint16_t addr;
|
|
};
|
|
|
|
struct ds3231_data {
|
|
const struct device *ds3231;
|
|
const struct device *i2c;
|
|
const struct device *isw;
|
|
struct register_map registers;
|
|
|
|
struct k_sem lock;
|
|
|
|
/* Timer structure used for synchronization */
|
|
struct k_timer sync_timer;
|
|
|
|
/* Work structures for the various cases of ISW interrupt. */
|
|
struct k_work alarm_work;
|
|
struct k_work sqw_work;
|
|
struct k_work sync_work;
|
|
|
|
/* Forward ISW interrupt to proper worker. */
|
|
struct gpio_callback isw_callback;
|
|
|
|
/* syncclock captured in the last ISW interrupt handler */
|
|
uint32_t isw_syncclock;
|
|
|
|
struct maxim_ds3231_syncpoint syncpoint;
|
|
struct maxim_ds3231_syncpoint new_sp;
|
|
|
|
time_t rtc_registers;
|
|
time_t rtc_base;
|
|
uint32_t syncclock_base;
|
|
|
|
/* Pointer to the structure used to notify when a synchronize
|
|
* or set operation completes. Null when nobody's waiting for
|
|
* such an operation, or when doing a no-notify synchronize
|
|
* through the signal API.
|
|
*/
|
|
union {
|
|
void *ptr;
|
|
struct sys_notify *notify;
|
|
struct k_poll_signal *signal;
|
|
} sync;
|
|
|
|
/* Handlers and state when using the counter alarm API. */
|
|
counter_alarm_callback_t counter_handler[2];
|
|
uint32_t counter_ticks[2];
|
|
|
|
/* Handlers and state for DS3231 alarm API. */
|
|
maxim_ds3231_alarm_callback_handler_t alarm_handler[2];
|
|
void *alarm_user_data[2];
|
|
uint8_t alarm_flags[2];
|
|
|
|
/* Flags recording requests for ISW monitoring. */
|
|
uint8_t isw_mon_req;
|
|
#define ISW_MON_REQ_Alarm 0x01
|
|
#define ISW_MON_REQ_Sync 0x02
|
|
|
|
/* Status of synchronization operations. */
|
|
uint8_t sync_state;
|
|
bool sync_signal;
|
|
};
|
|
|
|
/*
|
|
* Set and clear specific bits in the control register.
|
|
*
|
|
* This function assumes the device register cache is valid and will
|
|
* update the device only if the value changes as a result of applying
|
|
* the set and clear changes.
|
|
*
|
|
* Caches and returns the value with the changes applied.
|
|
*/
|
|
static int sc_ctrl(const struct device *dev,
|
|
uint8_t set,
|
|
uint8_t clear)
|
|
{
|
|
struct ds3231_data *data = dev->data;
|
|
const struct ds3231_config *cfg = dev->config;
|
|
struct register_map *rp = &data->registers;
|
|
uint8_t ctrl = (rp->ctrl & ~clear) | set;
|
|
int rc = ctrl;
|
|
|
|
if (rp->ctrl != ctrl) {
|
|
uint8_t buf[2] = {
|
|
offsetof(struct register_map, ctrl),
|
|
ctrl,
|
|
};
|
|
rc = i2c_write(data->i2c, buf, sizeof(buf), cfg->addr);
|
|
if (rc >= 0) {
|
|
rp->ctrl = ctrl;
|
|
rc = ctrl;
|
|
}
|
|
}
|
|
return rc;
|
|
}
|
|
|
|
int maxim_ds3231_ctrl_update(const struct device *dev,
|
|
uint8_t set_bits,
|
|
uint8_t clear_bits)
|
|
{
|
|
struct ds3231_data *data = dev->data;
|
|
|
|
k_sem_take(&data->lock, K_FOREVER);
|
|
|
|
int rc = sc_ctrl(dev, set_bits, clear_bits);
|
|
|
|
k_sem_give(&data->lock);
|
|
|
|
return rc;
|
|
}
|
|
|
|
/*
|
|
* Read the ctrl_stat register then set and clear bits in it.
|
|
*
|
|
* OSF, A1F, and A2F will be written with 1s if the corresponding bits
|
|
* do not appear in either set or clear. This ensures that if any
|
|
* flag becomes set between the read and the write that indicator will
|
|
* not be cleared.
|
|
*
|
|
* Returns the value as originally read (disregarding the effect of
|
|
* clears and sets).
|
|
*/
|
|
static inline int rsc_stat(const struct device *dev,
|
|
uint8_t set,
|
|
uint8_t clear)
|
|
{
|
|
uint8_t const ign = MAXIM_DS3231_REG_STAT_OSF | MAXIM_DS3231_ALARM1
|
|
| MAXIM_DS3231_ALARM2;
|
|
struct ds3231_data *data = dev->data;
|
|
const struct ds3231_config *cfg = dev->config;
|
|
struct register_map *rp = &data->registers;
|
|
uint8_t addr = offsetof(struct register_map, ctrl_stat);
|
|
int rc;
|
|
|
|
rc = i2c_write_read(data->i2c, cfg->addr,
|
|
&addr, sizeof(addr),
|
|
&rp->ctrl_stat, sizeof(rp->ctrl_stat));
|
|
if (rc >= 0) {
|
|
uint8_t stat = rp->ctrl_stat & ~clear;
|
|
|
|
if (rp->ctrl_stat != stat) {
|
|
uint8_t buf[2] = {
|
|
addr,
|
|
stat | (ign & ~(set | clear)),
|
|
};
|
|
rc = i2c_write(data->i2c, buf, sizeof(buf), cfg->addr);
|
|
}
|
|
if (rc >= 0) {
|
|
rc = rp->ctrl_stat;
|
|
}
|
|
}
|
|
return rc;
|
|
}
|
|
|
|
int maxim_ds3231_stat_update(const struct device *dev,
|
|
uint8_t set_bits,
|
|
uint8_t clear_bits)
|
|
{
|
|
struct ds3231_data *data = dev->data;
|
|
|
|
k_sem_take(&data->lock, K_FOREVER);
|
|
|
|
int rv = rsc_stat(dev, set_bits, clear_bits);
|
|
|
|
k_sem_give(&data->lock);
|
|
|
|
return rv;
|
|
}
|
|
|
|
/*
|
|
* Look for current users of the interrupt/square-wave signal and
|
|
* enable monitoring iff at least one consumer is active.
|
|
*/
|
|
static void validate_isw_monitoring(const struct device *dev)
|
|
{
|
|
struct ds3231_data *data = dev->data;
|
|
const struct ds3231_config *cfg = dev->config;
|
|
const struct register_map *rp = &data->registers;
|
|
uint8_t isw_mon_req = 0;
|
|
|
|
if (rp->ctrl & (MAXIM_DS3231_ALARM1 | MAXIM_DS3231_ALARM2)) {
|
|
isw_mon_req |= ISW_MON_REQ_Alarm;
|
|
}
|
|
if (data->sync_state != SYNCSM_IDLE) {
|
|
isw_mon_req |= ISW_MON_REQ_Sync;
|
|
}
|
|
LOG_DBG("ISW %p : %d ?= %d", data->isw, isw_mon_req, data->isw_mon_req);
|
|
if ((data->isw != NULL)
|
|
&& (isw_mon_req != data->isw_mon_req)) {
|
|
int rc = 0;
|
|
|
|
/* Disable before reconfigure */
|
|
rc = gpio_pin_interrupt_configure(data->isw, cfg->isw_gpios.pin,
|
|
GPIO_INT_DISABLE);
|
|
|
|
if ((rc >= 0)
|
|
&& ((isw_mon_req & ISW_MON_REQ_Sync)
|
|
!= (data->isw_mon_req & ISW_MON_REQ_Sync))) {
|
|
if (isw_mon_req & ISW_MON_REQ_Sync) {
|
|
rc = sc_ctrl(dev, 0,
|
|
MAXIM_DS3231_REG_CTRL_INTCN
|
|
| MAXIM_DS3231_REG_CTRL_RS_Msk);
|
|
} else {
|
|
rc = sc_ctrl(dev, MAXIM_DS3231_REG_CTRL_INTCN, 0);
|
|
}
|
|
}
|
|
|
|
data->isw_mon_req = isw_mon_req;
|
|
|
|
/* Enable if any requests active */
|
|
if ((rc >= 0) && (isw_mon_req != 0)) {
|
|
rc = gpio_pin_interrupt_configure(data->isw,
|
|
cfg->isw_gpios.pin,
|
|
GPIO_INT_EDGE_TO_ACTIVE);
|
|
}
|
|
|
|
LOG_INF("ISW reconfigure to %x: %d", isw_mon_req, rc);
|
|
}
|
|
}
|
|
|
|
static const uint8_t *decode_time(struct tm *tp,
|
|
const uint8_t *rp,
|
|
bool with_sec)
|
|
{
|
|
uint8_t reg;
|
|
|
|
if (with_sec) {
|
|
uint8_t reg = *rp++;
|
|
|
|
tp->tm_sec = 10 * ((reg >> 4) & 0x07) + (reg & 0x0F);
|
|
}
|
|
|
|
reg = *rp++;
|
|
tp->tm_min = 10 * ((reg >> 4) & 0x07) + (reg & 0x0F);
|
|
|
|
reg = *rp++;
|
|
tp->tm_hour = (reg & 0x0F);
|
|
if (REG_HOURS_12H & reg) {
|
|
/* 12-hour */
|
|
if (REG_HOURS_10 & reg) {
|
|
tp->tm_hour += 10;
|
|
}
|
|
if (REG_HOURS_PM & reg) {
|
|
tp->tm_hour += 12;
|
|
}
|
|
} else {
|
|
/* 24 hour */
|
|
tp->tm_hour += 10 * ((reg >> 4) & 0x03);
|
|
}
|
|
|
|
return rp;
|
|
}
|
|
|
|
static uint8_t decode_alarm(const uint8_t *ap,
|
|
bool with_sec,
|
|
time_t *tp)
|
|
{
|
|
struct tm tm = {
|
|
/* tm_year zero is 1900 with underflows a 32-bit counter
|
|
* representation. Use 1978-01, the first January after the
|
|
* POSIX epoch where the first day of the month is the first
|
|
* day of the week.
|
|
*/
|
|
.tm_year = 78,
|
|
};
|
|
const uint8_t *dp = decode_time(&tm, ap, with_sec);
|
|
uint8_t flags = 0;
|
|
uint8_t amf = MAXIM_DS3231_ALARM_FLAGS_IGNDA;
|
|
|
|
/* Done decoding time, now decode day/date. */
|
|
if (REG_DAYDATE_DOW & *dp) {
|
|
flags |= MAXIM_DS3231_ALARM_FLAGS_DOW;
|
|
|
|
/* Because tm.tm_wday does not contribute to the UNIX
|
|
* time that the civil time translates into, we need
|
|
* to also record the tm_mday for our selected base
|
|
* 1978-01 that will produce the correct tm_wday.
|
|
*/
|
|
tm.tm_mday = (*dp & 0x07);
|
|
tm.tm_wday = tm.tm_mday - 1;
|
|
} else {
|
|
tm.tm_mday = 10 * ((*dp >> 4) & 0x3) + (*dp & 0x0F);
|
|
}
|
|
|
|
/* Walk backwards to extract the alarm mask flags. */
|
|
while (true) {
|
|
if (REG_ALARM_IGN & *dp) {
|
|
flags |= amf;
|
|
}
|
|
amf >>= 1;
|
|
if (dp-- == ap) {
|
|
break;
|
|
}
|
|
}
|
|
|
|
/* Convert to the reduced representation. */
|
|
*tp = timeutil_timegm(&tm);
|
|
return flags;
|
|
}
|
|
|
|
static int encode_alarm(uint8_t *ap,
|
|
bool with_sec,
|
|
time_t time,
|
|
uint8_t flags)
|
|
{
|
|
struct tm tm;
|
|
uint8_t val;
|
|
|
|
(void)gmtime_r(&time, &tm);
|
|
|
|
/* For predictable behavior the low 4 bits of flags
|
|
* (corresponding to AxMy) must be 0b1111, 0b1110, 0b1100,
|
|
* 0b1000, or 0b0000. This corresponds to the bitwise inverse
|
|
* being one less than a power of two.
|
|
*/
|
|
if (!is_power_of_two(1U + (0x0F & ~flags))) {
|
|
LOG_DBG("invalid alarm mask in flags: %02x", flags);
|
|
return -EINVAL;
|
|
}
|
|
|
|
if (with_sec) {
|
|
if (flags & MAXIM_DS3231_ALARM_FLAGS_IGNSE) {
|
|
val = REG_ALARM_IGN;
|
|
} else {
|
|
val = ((tm.tm_sec / 10) << 4) | (tm.tm_sec % 10);
|
|
}
|
|
*ap++ = val;
|
|
}
|
|
|
|
if (flags & MAXIM_DS3231_ALARM_FLAGS_IGNMN) {
|
|
val = REG_ALARM_IGN;
|
|
} else {
|
|
val = ((tm.tm_min / 10) << 4) | (tm.tm_min % 10);
|
|
}
|
|
*ap++ = val;
|
|
|
|
if (flags & MAXIM_DS3231_ALARM_FLAGS_IGNHR) {
|
|
val = REG_ALARM_IGN;
|
|
} else {
|
|
val = ((tm.tm_hour / 10) << 4) | (tm.tm_hour % 10);
|
|
}
|
|
*ap++ = val;
|
|
|
|
if (flags & MAXIM_DS3231_ALARM_FLAGS_IGNDA) {
|
|
val = REG_ALARM_IGN;
|
|
} else if (flags & MAXIM_DS3231_ALARM_FLAGS_DOW) {
|
|
val = REG_DAYDATE_DOW | (tm.tm_wday + 1);
|
|
} else {
|
|
val = ((tm.tm_mday / 10) << 4) | (tm.tm_mday % 10);
|
|
}
|
|
*ap++ = val;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static uint32_t decode_rtc(struct ds3231_data *data)
|
|
{
|
|
struct tm tm = { 0 };
|
|
const struct register_map *rp = &data->registers;
|
|
|
|
decode_time(&tm, &rp->sec, true);
|
|
tm.tm_wday = (rp->dow & 0x07) - 1;
|
|
tm.tm_mday = 10 * ((rp->dom >> 4) & 0x03) + (rp->dom & 0x0F);
|
|
tm.tm_mon = 10 * (((0xF0 & ~REG_MONCEN_CENTURY) & rp->moncen) >> 4)
|
|
+ (rp->moncen & 0x0F) - 1;
|
|
tm.tm_year = (10 * (rp->year >> 4)) + (rp->year & 0x0F);
|
|
if (REG_MONCEN_CENTURY & rp->moncen) {
|
|
tm.tm_year += 100;
|
|
}
|
|
|
|
data->rtc_registers = timeutil_timegm(&tm);
|
|
return data->rtc_registers;
|
|
}
|
|
|
|
static int update_registers(const struct device *dev)
|
|
{
|
|
struct ds3231_data *data = dev->data;
|
|
const struct ds3231_config *cfg = dev->config;
|
|
uint32_t syncclock;
|
|
int rc;
|
|
uint8_t addr = 0;
|
|
|
|
data->syncclock_base = maxim_ds3231_read_syncclock(dev);
|
|
rc = i2c_write_read(data->i2c, cfg->addr,
|
|
&addr, sizeof(addr),
|
|
&data->registers, sizeof(data->registers));
|
|
syncclock = maxim_ds3231_read_syncclock(dev);
|
|
if (rc < 0) {
|
|
return rc;
|
|
}
|
|
data->rtc_base = decode_rtc(data);
|
|
|
|
return 0;
|
|
}
|
|
|
|
int maxim_ds3231_get_alarm(const struct device *dev,
|
|
uint8_t id,
|
|
struct maxim_ds3231_alarm *cp)
|
|
{
|
|
struct ds3231_data *data = dev->data;
|
|
const struct ds3231_config *cfg = dev->config;
|
|
int rv = 0;
|
|
uint8_t addr;
|
|
uint8_t len;
|
|
|
|
if (id == 0) {
|
|
addr = offsetof(struct register_map, alarm1);
|
|
len = sizeof(data->registers.alarm1);
|
|
} else if (id < cfg->generic.channels) {
|
|
addr = offsetof(struct register_map, alarm2);
|
|
len = sizeof(data->registers.alarm2);
|
|
} else {
|
|
rv = -EINVAL;
|
|
goto out;
|
|
}
|
|
|
|
k_sem_take(&data->lock, K_FOREVER);
|
|
|
|
/* Update alarm structure */
|
|
uint8_t *rbp = &data->registers.sec + addr;
|
|
|
|
rv = i2c_write_read(data->i2c, cfg->addr,
|
|
&addr, sizeof(addr),
|
|
rbp, len);
|
|
|
|
if (rv < 0) {
|
|
LOG_DBG("get_config at %02x failed: %d\n", addr, rv);
|
|
goto out_locked;
|
|
}
|
|
|
|
*cp = (struct maxim_ds3231_alarm){ 0 };
|
|
cp->flags = decode_alarm(rbp, (id == 0), &cp->time);
|
|
cp->handler = data->alarm_handler[id];
|
|
cp->user_data = data->alarm_user_data[id];
|
|
|
|
out_locked:
|
|
k_sem_give(&data->lock);
|
|
|
|
out:
|
|
return rv;
|
|
}
|
|
|
|
static int cancel_alarm(const struct device *dev,
|
|
uint8_t id)
|
|
{
|
|
struct ds3231_data *data = dev->data;
|
|
|
|
data->alarm_handler[id] = NULL;
|
|
data->alarm_user_data[id] = NULL;
|
|
|
|
return sc_ctrl(dev, 0, MAXIM_DS3231_ALARM1 << id);
|
|
}
|
|
|
|
static int ds3231_counter_cancel_alarm(const struct device *dev,
|
|
uint8_t id)
|
|
{
|
|
struct ds3231_data *data = dev->data;
|
|
const struct ds3231_config *cfg = dev->config;
|
|
int rv = 0;
|
|
|
|
if (id >= cfg->generic.channels) {
|
|
rv = -EINVAL;
|
|
goto out;
|
|
}
|
|
|
|
k_sem_take(&data->lock, K_FOREVER);
|
|
|
|
rv = cancel_alarm(dev, id);
|
|
|
|
k_sem_give(&data->lock);
|
|
|
|
out:
|
|
/* Throw away information counter API disallows */
|
|
if (rv >= 0) {
|
|
rv = 0;
|
|
}
|
|
|
|
return rv;
|
|
}
|
|
|
|
static int set_alarm(const struct device *dev,
|
|
uint8_t id,
|
|
const struct maxim_ds3231_alarm *cp)
|
|
{
|
|
struct ds3231_data *data = dev->data;
|
|
const struct ds3231_config *cfg = dev->config;
|
|
uint8_t addr;
|
|
uint8_t len;
|
|
|
|
if (id == 0) {
|
|
addr = offsetof(struct register_map, alarm1);
|
|
len = sizeof(data->registers.alarm1);
|
|
} else if (id < cfg->generic.channels) {
|
|
addr = offsetof(struct register_map, alarm2);
|
|
len = sizeof(data->registers.alarm2);
|
|
} else {
|
|
return -EINVAL;
|
|
}
|
|
|
|
uint8_t buf[5] = { addr };
|
|
int rc = encode_alarm(buf + 1, (id == 0), cp->time, cp->flags);
|
|
|
|
if (rc < 0) {
|
|
return rc;
|
|
}
|
|
|
|
/* @todo resolve race condition: a previously stored alarm may
|
|
* trigger between clear of AxF and the write of the new alarm
|
|
* control.
|
|
*/
|
|
rc = rsc_stat(dev, 0U, (MAXIM_DS3231_ALARM1 << id));
|
|
if (rc >= 0) {
|
|
rc = i2c_write(data->i2c, buf, len + 1, cfg->addr);
|
|
}
|
|
if ((rc >= 0)
|
|
&& (cp->handler != NULL)) {
|
|
rc = sc_ctrl(dev, MAXIM_DS3231_ALARM1 << id, 0);
|
|
}
|
|
if (rc >= 0) {
|
|
memmove(&data->registers.sec + addr, buf + 1, len);
|
|
data->alarm_handler[id] = cp->handler;
|
|
data->alarm_user_data[id] = cp->user_data;
|
|
data->alarm_flags[id] = cp->flags;
|
|
validate_isw_monitoring(dev);
|
|
}
|
|
|
|
return rc;
|
|
}
|
|
|
|
int maxim_ds3231_set_alarm(const struct device *dev,
|
|
uint8_t id,
|
|
const struct maxim_ds3231_alarm *cp)
|
|
{
|
|
struct ds3231_data *data = dev->data;
|
|
|
|
k_sem_take(&data->lock, K_FOREVER);
|
|
|
|
int rc = set_alarm(dev, id, cp);
|
|
|
|
k_sem_give(&data->lock);
|
|
|
|
return rc;
|
|
}
|
|
|
|
int maxim_ds3231_check_alarms(const struct device *dev)
|
|
{
|
|
struct ds3231_data *data = dev->data;
|
|
const struct register_map *rp = &data->registers;
|
|
uint8_t mask = (MAXIM_DS3231_ALARM1 | MAXIM_DS3231_ALARM2);
|
|
|
|
k_sem_take(&data->lock, K_FOREVER);
|
|
|
|
/* Fetch and clear only the alarm flags that are not
|
|
* interrupt-enabled.
|
|
*/
|
|
int rv = rsc_stat(dev, 0U, (rp->ctrl & mask) ^ mask);
|
|
|
|
if (rv >= 0) {
|
|
rv &= mask;
|
|
}
|
|
|
|
k_sem_give(&data->lock);
|
|
|
|
return rv;
|
|
}
|
|
|
|
static int check_handled_alarms(const struct device *dev)
|
|
{
|
|
struct ds3231_data *data = dev->data;
|
|
const struct register_map *rp = &data->registers;
|
|
uint8_t mask = (MAXIM_DS3231_ALARM1 | MAXIM_DS3231_ALARM2);
|
|
|
|
/* Fetch and clear only the alarm flags that are
|
|
* interrupt-enabled. Leave any flags that are not enabled;
|
|
* it may be an alarm that triggered a wakeup.
|
|
*/
|
|
mask &= rp->ctrl;
|
|
|
|
int rv = rsc_stat(dev, 0U, mask);
|
|
|
|
if (rv > 0) {
|
|
rv &= mask;
|
|
}
|
|
|
|
return rv;
|
|
}
|
|
|
|
static void counter_alarm_forwarder(const struct device *dev,
|
|
uint8_t id,
|
|
uint32_t syncclock,
|
|
void *ud)
|
|
{
|
|
/* Dummy handler marking a counter callback. */
|
|
}
|
|
|
|
static void alarm_worker(struct k_work *work)
|
|
{
|
|
struct ds3231_data *data = CONTAINER_OF(work, struct ds3231_data,
|
|
alarm_work);
|
|
const struct device *ds3231 = data->ds3231;
|
|
const struct ds3231_config *cfg = ds3231->config;
|
|
|
|
k_sem_take(&data->lock, K_FOREVER);
|
|
|
|
int af = check_handled_alarms(ds3231);
|
|
|
|
while (af > 0) {
|
|
uint8_t id;
|
|
|
|
for (id = 0; id < cfg->generic.channels; ++id) {
|
|
if ((af & (MAXIM_DS3231_ALARM1 << id)) == 0) {
|
|
continue;
|
|
}
|
|
|
|
|
|
maxim_ds3231_alarm_callback_handler_t handler
|
|
= data->alarm_handler[id];
|
|
void *ud = data->alarm_user_data[id];
|
|
|
|
if (data->alarm_flags[id] & MAXIM_DS3231_ALARM_FLAGS_AUTODISABLE) {
|
|
int rc = cancel_alarm(ds3231, id);
|
|
|
|
LOG_DBG("autodisable %d: %d", id, rc);
|
|
validate_isw_monitoring(ds3231);
|
|
}
|
|
|
|
if (handler == counter_alarm_forwarder) {
|
|
counter_alarm_callback_t cb = data->counter_handler[id];
|
|
uint32_t ticks = data->counter_ticks[id];
|
|
|
|
data->counter_handler[id] = NULL;
|
|
data->counter_ticks[id] = 0;
|
|
|
|
if (cb) {
|
|
k_sem_give(&data->lock);
|
|
|
|
cb(ds3231, id, ticks, ud);
|
|
|
|
k_sem_take(&data->lock, K_FOREVER);
|
|
}
|
|
|
|
} else if (handler != NULL) {
|
|
k_sem_give(&data->lock);
|
|
|
|
handler(ds3231, id, data->isw_syncclock, ud);
|
|
|
|
k_sem_take(&data->lock, K_FOREVER);
|
|
}
|
|
}
|
|
af = check_handled_alarms(ds3231);
|
|
}
|
|
|
|
k_sem_give(&data->lock);
|
|
|
|
if (af < 0) {
|
|
LOG_ERR("failed to read alarm flags");
|
|
return;
|
|
}
|
|
|
|
LOG_DBG("ALARM %02x at %u latency %u", af, data->isw_syncclock,
|
|
maxim_ds3231_read_syncclock(ds3231) - data->isw_syncclock);
|
|
}
|
|
|
|
static void sqw_worker(struct k_work *work)
|
|
{
|
|
struct ds3231_data *data = CONTAINER_OF(work, struct ds3231_data, sqw_work);
|
|
uint32_t syncclock = maxim_ds3231_read_syncclock(data->ds3231);
|
|
|
|
/* This is a placeholder for potential application-controlled
|
|
* use of the square wave functionality.
|
|
*/
|
|
LOG_DBG("SQW %u latency %u", data->isw_syncclock,
|
|
syncclock - data->isw_syncclock);
|
|
}
|
|
|
|
static int read_time(const struct device *dev,
|
|
time_t *time)
|
|
{
|
|
struct ds3231_data *data = dev->data;
|
|
const struct ds3231_config *cfg = dev->config;
|
|
uint8_t addr = 0;
|
|
|
|
int rc = i2c_write_read(data->i2c, cfg->addr,
|
|
&addr, sizeof(addr),
|
|
&data->registers, 7);
|
|
|
|
if (rc >= 0) {
|
|
*time = decode_rtc(data);
|
|
}
|
|
|
|
return rc;
|
|
}
|
|
|
|
static int ds3231_counter_get_value(const struct device *dev,
|
|
uint32_t *ticks)
|
|
{
|
|
struct ds3231_data *data = dev->data;
|
|
time_t time = 0;
|
|
|
|
k_sem_take(&data->lock, K_FOREVER);
|
|
|
|
int rc = read_time(dev, &time);
|
|
|
|
k_sem_give(&data->lock);
|
|
|
|
if (rc >= 0) {
|
|
*ticks = time;
|
|
}
|
|
|
|
return rc;
|
|
}
|
|
|
|
static void sync_finish(const struct device *dev,
|
|
int rc)
|
|
{
|
|
struct ds3231_data *data = dev->data;
|
|
struct sys_notify *notify = NULL;
|
|
struct k_poll_signal *signal = NULL;
|
|
|
|
if (data->sync_signal) {
|
|
signal = data->sync.signal;
|
|
} else {
|
|
notify = data->sync.notify;
|
|
}
|
|
data->sync.ptr = NULL;
|
|
data->sync_signal = false;
|
|
data->sync_state = SYNCSM_IDLE;
|
|
(void)validate_isw_monitoring(dev);
|
|
|
|
LOG_DBG("sync complete, notify %d to %p or %p\n", rc, notify, signal);
|
|
k_sem_give(&data->lock);
|
|
|
|
if (notify != NULL) {
|
|
maxim_ds3231_notify_callback cb =
|
|
(maxim_ds3231_notify_callback)sys_notify_finalize(notify, rc);
|
|
|
|
if (cb) {
|
|
cb(dev, notify, rc);
|
|
}
|
|
} else if (signal != NULL) {
|
|
k_poll_signal_raise(signal, rc);
|
|
}
|
|
}
|
|
|
|
static void sync_prep_read(const struct device *dev)
|
|
{
|
|
struct ds3231_data *data = dev->data;
|
|
int rc = sc_ctrl(dev, 0U, MAXIM_DS3231_REG_CTRL_INTCN
|
|
| MAXIM_DS3231_REG_CTRL_RS_Msk);
|
|
|
|
if (rc < 0) {
|
|
sync_finish(dev, rc);
|
|
return;
|
|
}
|
|
data->sync_state = SYNCSM_FINISH_READ;
|
|
validate_isw_monitoring(dev);
|
|
}
|
|
|
|
static void sync_finish_read(const struct device *dev)
|
|
{
|
|
struct ds3231_data *data = dev->data;
|
|
time_t time = 0;
|
|
|
|
(void)read_time(dev, &time);
|
|
data->syncpoint.rtc.tv_sec = time;
|
|
data->syncpoint.rtc.tv_nsec = 0;
|
|
data->syncpoint.syncclock = data->isw_syncclock;
|
|
sync_finish(dev, 0);
|
|
}
|
|
|
|
static void sync_timer_handler(struct k_timer *tmr)
|
|
{
|
|
struct ds3231_data *data = CONTAINER_OF(tmr, struct ds3231_data,
|
|
sync_timer);
|
|
|
|
LOG_INF("sync_timer fired");
|
|
k_work_submit(&data->sync_work);
|
|
}
|
|
|
|
static void sync_prep_write(const struct device *dev)
|
|
{
|
|
struct ds3231_data *data = dev->data;
|
|
uint32_t syncclock = maxim_ds3231_read_syncclock(dev);
|
|
uint32_t offset = syncclock - data->new_sp.syncclock;
|
|
uint32_t syncclock_Hz = maxim_ds3231_syncclock_frequency(dev);
|
|
uint32_t offset_s = offset / syncclock_Hz;
|
|
uint32_t offset_ms = (offset % syncclock_Hz) * 1000U / syncclock_Hz;
|
|
time_t when = data->new_sp.rtc.tv_sec;
|
|
|
|
when += offset_s;
|
|
offset_ms += data->new_sp.rtc.tv_nsec / NSEC_PER_USEC / USEC_PER_MSEC;
|
|
if (offset_ms >= MSEC_PER_SEC) {
|
|
offset_ms -= MSEC_PER_SEC;
|
|
} else {
|
|
when += 1;
|
|
}
|
|
|
|
uint32_t rem_ms = MSEC_PER_SEC - offset_ms;
|
|
|
|
if (rem_ms < 5) {
|
|
when += 1;
|
|
rem_ms += MSEC_PER_SEC;
|
|
}
|
|
data->new_sp.rtc.tv_sec = when;
|
|
data->new_sp.rtc.tv_nsec = 0;
|
|
|
|
data->sync_state = SYNCSM_FINISH_WRITE;
|
|
k_timer_start(&data->sync_timer, K_MSEC(rem_ms), K_NO_WAIT);
|
|
LOG_INF("sync %u in %u ms after %u", (uint32_t)when, rem_ms, syncclock);
|
|
}
|
|
|
|
static void sync_finish_write(const struct device *dev)
|
|
{
|
|
struct ds3231_data *data = dev->data;
|
|
const struct ds3231_config *cfg = dev->config;
|
|
time_t when = data->new_sp.rtc.tv_sec;
|
|
struct tm tm;
|
|
uint8_t buf[8];
|
|
uint8_t *bp = buf;
|
|
uint8_t val;
|
|
|
|
*bp++ = offsetof(struct register_map, sec);
|
|
|
|
(void)gmtime_r(&when, &tm);
|
|
val = ((tm.tm_sec / 10) << 4) | (tm.tm_sec % 10);
|
|
*bp++ = val;
|
|
|
|
val = ((tm.tm_min / 10) << 4) | (tm.tm_min % 10);
|
|
*bp++ = val;
|
|
|
|
val = ((tm.tm_hour / 10) << 4) | (tm.tm_hour % 10);
|
|
*bp++ = val;
|
|
|
|
*bp++ = 1 + tm.tm_wday;
|
|
|
|
val = ((tm.tm_mday / 10) << 4) | (tm.tm_mday % 10);
|
|
*bp++ = val;
|
|
|
|
tm.tm_mon += 1;
|
|
val = ((tm.tm_mon / 10) << 4) | (tm.tm_mon % 10);
|
|
if (tm.tm_year >= 100) {
|
|
tm.tm_year -= 100;
|
|
val |= REG_MONCEN_CENTURY;
|
|
}
|
|
*bp++ = val;
|
|
|
|
val = ((tm.tm_year / 10) << 4) | (tm.tm_year % 10);
|
|
*bp++ = val;
|
|
|
|
uint32_t syncclock = maxim_ds3231_read_syncclock(dev);
|
|
int rc = i2c_write(data->i2c, buf, bp - buf, cfg->addr);
|
|
|
|
if (rc >= 0) {
|
|
data->syncpoint.rtc.tv_sec = when;
|
|
data->syncpoint.rtc.tv_nsec = 0;
|
|
data->syncpoint.syncclock = syncclock;
|
|
LOG_INF("sync %u at %u", (uint32_t)when, syncclock);
|
|
}
|
|
sync_finish(dev, rc);
|
|
}
|
|
|
|
static void sync_worker(struct k_work *work)
|
|
{
|
|
struct ds3231_data *data = CONTAINER_OF(work, struct ds3231_data, sync_work);
|
|
uint32_t syncclock = maxim_ds3231_read_syncclock(data->ds3231);
|
|
bool unlock = true;
|
|
|
|
k_sem_take(&data->lock, K_FOREVER);
|
|
|
|
LOG_DBG("SYNC.%u %u latency %u", data->sync_state, data->isw_syncclock,
|
|
syncclock - data->isw_syncclock);
|
|
switch (data->sync_state) {
|
|
default:
|
|
case SYNCSM_IDLE:
|
|
break;
|
|
case SYNCSM_PREP_READ:
|
|
sync_prep_read(data->ds3231);
|
|
break;
|
|
case SYNCSM_FINISH_READ:
|
|
sync_finish_read(data->ds3231);
|
|
break;
|
|
case SYNCSM_PREP_WRITE:
|
|
sync_prep_write(data->ds3231);
|
|
break;
|
|
case SYNCSM_FINISH_WRITE:
|
|
sync_finish_write(data->ds3231);
|
|
unlock = false;
|
|
break;
|
|
}
|
|
|
|
if (unlock) {
|
|
k_sem_give(&data->lock);
|
|
}
|
|
}
|
|
|
|
static void isw_gpio_callback(const struct device *port,
|
|
struct gpio_callback *cb,
|
|
uint32_t pins)
|
|
{
|
|
struct ds3231_data *data = CONTAINER_OF(cb, struct ds3231_data,
|
|
isw_callback);
|
|
|
|
data->isw_syncclock = maxim_ds3231_read_syncclock(data->ds3231);
|
|
if (data->registers.ctrl & MAXIM_DS3231_REG_CTRL_INTCN) {
|
|
k_work_submit(&data->alarm_work);
|
|
} else if (data->sync_state != SYNCSM_IDLE) {
|
|
k_work_submit(&data->sync_work);
|
|
} else {
|
|
k_work_submit(&data->sqw_work);
|
|
}
|
|
}
|
|
|
|
int z_impl_maxim_ds3231_get_syncpoint(const struct device *dev,
|
|
struct maxim_ds3231_syncpoint *syncpoint)
|
|
{
|
|
struct ds3231_data *data = dev->data;
|
|
int rv = 0;
|
|
|
|
k_sem_take(&data->lock, K_FOREVER);
|
|
|
|
if (data->syncpoint.rtc.tv_sec == 0) {
|
|
rv = -ENOENT;
|
|
} else {
|
|
__ASSERT_NO_MSG(syncpoint != NULL);
|
|
*syncpoint = data->syncpoint;
|
|
}
|
|
|
|
k_sem_give(&data->lock);
|
|
|
|
return rv;
|
|
}
|
|
|
|
int maxim_ds3231_synchronize(const struct device *dev,
|
|
struct sys_notify *notify)
|
|
{
|
|
struct ds3231_data *data = dev->data;
|
|
int rv = 0;
|
|
|
|
if (notify == NULL) {
|
|
rv = -EINVAL;
|
|
goto out;
|
|
}
|
|
|
|
if (data->isw == NULL) {
|
|
rv = -ENOTSUP;
|
|
goto out;
|
|
}
|
|
|
|
k_sem_take(&data->lock, K_FOREVER);
|
|
|
|
if (data->sync_state != SYNCSM_IDLE) {
|
|
rv = -EBUSY;
|
|
goto out_locked;
|
|
}
|
|
|
|
data->sync_signal = false;
|
|
data->sync.notify = notify;
|
|
data->sync_state = SYNCSM_PREP_READ;
|
|
|
|
out_locked:
|
|
k_sem_give(&data->lock);
|
|
|
|
if (rv >= 0) {
|
|
k_work_submit(&data->sync_work);
|
|
}
|
|
|
|
out:
|
|
return rv;
|
|
}
|
|
|
|
int z_impl_maxim_ds3231_req_syncpoint(const struct device *dev,
|
|
struct k_poll_signal *sig)
|
|
{
|
|
struct ds3231_data *data = dev->data;
|
|
int rv = 0;
|
|
|
|
if (data->isw == NULL) {
|
|
rv = -ENOTSUP;
|
|
goto out;
|
|
}
|
|
|
|
k_sem_take(&data->lock, K_FOREVER);
|
|
|
|
if (data->sync_state != SYNCSM_IDLE) {
|
|
rv = -EBUSY;
|
|
goto out_locked;
|
|
}
|
|
|
|
data->sync_signal = true;
|
|
data->sync.signal = sig;
|
|
data->sync_state = SYNCSM_PREP_READ;
|
|
|
|
out_locked:
|
|
k_sem_give(&data->lock);
|
|
|
|
if (rv >= 0) {
|
|
k_work_submit(&data->sync_work);
|
|
}
|
|
|
|
out:
|
|
return rv;
|
|
}
|
|
|
|
int maxim_ds3231_set(const struct device *dev,
|
|
const struct maxim_ds3231_syncpoint *syncpoint,
|
|
struct sys_notify *notify)
|
|
{
|
|
struct ds3231_data *data = dev->data;
|
|
int rv = 0;
|
|
|
|
if ((syncpoint == NULL)
|
|
|| (notify == NULL)) {
|
|
rv = -EINVAL;
|
|
goto out;
|
|
}
|
|
if (data->isw == NULL) {
|
|
rv = -ENOTSUP;
|
|
goto out;
|
|
}
|
|
|
|
k_sem_take(&data->lock, K_FOREVER);
|
|
|
|
if (data->sync_state != SYNCSM_IDLE) {
|
|
rv = -EBUSY;
|
|
goto out_locked;
|
|
}
|
|
|
|
data->new_sp = *syncpoint;
|
|
data->sync_signal = false;
|
|
data->sync.notify = notify;
|
|
data->sync_state = SYNCSM_PREP_WRITE;
|
|
|
|
out_locked:
|
|
k_sem_give(&data->lock);
|
|
|
|
if (rv >= 0) {
|
|
k_work_submit(&data->sync_work);
|
|
}
|
|
|
|
out:
|
|
return rv;
|
|
}
|
|
|
|
static int ds3231_init(const struct device *dev)
|
|
{
|
|
struct ds3231_data *data = dev->data;
|
|
const struct ds3231_config *cfg = dev->config;
|
|
const struct device *i2c = device_get_binding(cfg->bus_name);
|
|
int rc;
|
|
|
|
/* Initialize and take the lock */
|
|
k_sem_init(&data->lock, 0, 1);
|
|
|
|
data->ds3231 = dev;
|
|
if (i2c == NULL) {
|
|
LOG_WRN("Failed to get I2C %s", cfg->bus_name);
|
|
rc = -EINVAL;
|
|
goto out;
|
|
}
|
|
|
|
data->i2c = i2c;
|
|
rc = update_registers(dev);
|
|
if (rc < 0) {
|
|
LOG_WRN("Failed to fetch registers: %d", rc);
|
|
goto out;
|
|
}
|
|
|
|
/* INTCN and AxIE to power-up default, RS to 1 Hz */
|
|
rc = sc_ctrl(dev,
|
|
MAXIM_DS3231_REG_CTRL_INTCN,
|
|
MAXIM_DS3231_REG_CTRL_RS_Msk
|
|
| MAXIM_DS3231_ALARM1 | MAXIM_DS3231_ALARM2);
|
|
if (rc < 0) {
|
|
LOG_WRN("Failed to reset config: %d", rc);
|
|
goto out;
|
|
}
|
|
|
|
/* Do not clear pending flags in the status register. This
|
|
* device may have been used for external wakeup, which can be
|
|
* detected using the extended API.
|
|
*/
|
|
|
|
if (cfg->isw_gpios.ctrl != NULL) {
|
|
const struct device *gpio = device_get_binding(cfg->isw_gpios.ctrl);
|
|
|
|
if (gpio == NULL) {
|
|
LOG_WRN("Failed to get INTn/SQW GPIO %s",
|
|
cfg->isw_gpios.ctrl);
|
|
rc = -EINVAL;
|
|
goto out;
|
|
}
|
|
|
|
k_timer_init(&data->sync_timer, sync_timer_handler, NULL);
|
|
k_work_init(&data->alarm_work, alarm_worker);
|
|
k_work_init(&data->sqw_work, sqw_worker);
|
|
k_work_init(&data->sync_work, sync_worker);
|
|
gpio_init_callback(&data->isw_callback,
|
|
isw_gpio_callback,
|
|
BIT(cfg->isw_gpios.pin));
|
|
|
|
rc = gpio_pin_configure(gpio, cfg->isw_gpios.pin,
|
|
GPIO_INPUT | cfg->isw_gpios.flags);
|
|
if (rc >= 0) {
|
|
rc = gpio_pin_interrupt_configure(gpio, cfg->isw_gpios.pin,
|
|
GPIO_INT_DISABLE);
|
|
}
|
|
if (rc >= 0) {
|
|
rc = gpio_add_callback(gpio, &data->isw_callback);
|
|
}
|
|
if (rc >= 0) {
|
|
data->isw = gpio;
|
|
} else {
|
|
LOG_WRN("Failed to configure ISW callback: %d", rc);
|
|
}
|
|
}
|
|
|
|
out:
|
|
k_sem_give(&data->lock);
|
|
|
|
LOG_DBG("Initialized %d", rc);
|
|
if (rc > 0) {
|
|
rc = 0;
|
|
}
|
|
|
|
return rc;
|
|
}
|
|
|
|
static int ds3231_counter_start(const struct device *dev)
|
|
{
|
|
return -EALREADY;
|
|
}
|
|
|
|
static int ds3231_counter_stop(const struct device *dev)
|
|
{
|
|
return -ENOTSUP;
|
|
}
|
|
|
|
int ds3231_counter_set_alarm(const struct device *dev,
|
|
uint8_t id,
|
|
const struct counter_alarm_cfg *alarm_cfg)
|
|
{
|
|
struct ds3231_data *data = dev->data;
|
|
const struct register_map *rp = &data->registers;
|
|
const struct ds3231_config *cfg = dev->config;
|
|
time_t when;
|
|
int rc = 0;
|
|
|
|
if (id >= cfg->generic.channels) {
|
|
rc = -ENOTSUP;
|
|
goto out;
|
|
}
|
|
|
|
k_sem_take(&data->lock, K_FOREVER);
|
|
|
|
if (rp->ctrl & (MAXIM_DS3231_ALARM1 << id)) {
|
|
rc = -EBUSY;
|
|
goto out_locked;
|
|
}
|
|
|
|
if ((alarm_cfg->flags & COUNTER_ALARM_CFG_ABSOLUTE) == 0) {
|
|
rc = read_time(dev, &when);
|
|
if (rc >= 0) {
|
|
when += alarm_cfg->ticks;
|
|
}
|
|
} else {
|
|
when = alarm_cfg->ticks;
|
|
}
|
|
|
|
struct maxim_ds3231_alarm alarm = {
|
|
.time = (uint32_t)when,
|
|
.handler = counter_alarm_forwarder,
|
|
.user_data = alarm_cfg->user_data,
|
|
.flags = MAXIM_DS3231_ALARM_FLAGS_AUTODISABLE,
|
|
};
|
|
|
|
if (rc >= 0) {
|
|
data->counter_handler[id] = alarm_cfg->callback;
|
|
data->counter_ticks[id] = alarm.time;
|
|
rc = set_alarm(dev, id, &alarm);
|
|
}
|
|
|
|
out_locked:
|
|
k_sem_give(&data->lock);
|
|
|
|
out:
|
|
/* Throw away information counter API disallows */
|
|
if (rc >= 0) {
|
|
rc = 0;
|
|
}
|
|
|
|
return rc;
|
|
}
|
|
|
|
static uint32_t ds3231_counter_get_top_value(const struct device *dev)
|
|
{
|
|
return UINT32_MAX;
|
|
}
|
|
|
|
static uint32_t ds3231_counter_get_pending_int(const struct device *dev)
|
|
{
|
|
return 0;
|
|
}
|
|
|
|
static int ds3231_counter_set_top_value(const struct device *dev,
|
|
const struct counter_top_cfg *cfg)
|
|
{
|
|
return -ENOTSUP;
|
|
}
|
|
|
|
static uint32_t ds3231_counter_get_max_relative_alarm(const struct device *dev)
|
|
{
|
|
return UINT32_MAX;
|
|
}
|
|
|
|
static const struct counter_driver_api ds3231_api = {
|
|
.start = ds3231_counter_start,
|
|
.stop = ds3231_counter_stop,
|
|
.get_value = ds3231_counter_get_value,
|
|
.set_alarm = ds3231_counter_set_alarm,
|
|
.cancel_alarm = ds3231_counter_cancel_alarm,
|
|
.set_top_value = ds3231_counter_set_top_value,
|
|
.get_pending_int = ds3231_counter_get_pending_int,
|
|
.get_top_value = ds3231_counter_get_top_value,
|
|
.get_max_relative_alarm = ds3231_counter_get_max_relative_alarm,
|
|
};
|
|
|
|
static const struct ds3231_config ds3231_0_config = {
|
|
.generic = {
|
|
.max_top_value = UINT32_MAX,
|
|
.freq = 1,
|
|
.flags = COUNTER_CONFIG_INFO_COUNT_UP,
|
|
.channels = 2,
|
|
},
|
|
.bus_name = DT_INST_BUS_LABEL(0),
|
|
/* Driver does not currently use 32k GPIO. */
|
|
#if DT_INST_NODE_HAS_PROP(0, isw_gpios)
|
|
.isw_gpios = {
|
|
DT_INST_GPIO_LABEL(0, isw_gpios),
|
|
DT_INST_GPIO_PIN(0, isw_gpios),
|
|
DT_INST_GPIO_FLAGS(0, isw_gpios),
|
|
},
|
|
#endif
|
|
.addr = DT_INST_REG_ADDR(0),
|
|
};
|
|
|
|
static struct ds3231_data ds3231_0_data;
|
|
|
|
#if CONFIG_COUNTER_MAXIM_DS3231_INIT_PRIORITY <= CONFIG_I2C_INIT_PRIORITY
|
|
#error COUNTER_MAXIM_DS3231_INIT_PRIORITY must be greater than I2C_INIT_PRIORITY
|
|
#endif
|
|
|
|
DEVICE_AND_API_INIT(ds3231_0, DT_INST_LABEL(0),
|
|
ds3231_init, &ds3231_0_data,
|
|
&ds3231_0_config,
|
|
POST_KERNEL, CONFIG_COUNTER_MAXIM_DS3231_INIT_PRIORITY,
|
|
&ds3231_api);
|
|
|
|
#ifdef CONFIG_USERSPACE
|
|
|
|
#include <syscall_handler.h>
|
|
|
|
int z_vrfy_maxim_ds3231_get_syncpoint(const struct device *dev,
|
|
struct maxim_ds3231_syncpoint *syncpoint)
|
|
{
|
|
struct maxim_ds3231_syncpoint value;
|
|
int rv;
|
|
|
|
Z_OOPS(Z_SYSCALL_SPECIFIC_DRIVER(dev, K_OBJ_DRIVER_COUNTER, &ds3231_api));
|
|
Z_OOPS(Z_SYSCALL_MEMORY_WRITE(syncpoint, sizeof(*syncpoint)));
|
|
|
|
rv = z_impl_maxim_ds3231_get_syncpoint(dev, &value);
|
|
|
|
if (rv >= 0) {
|
|
Z_OOPS(z_user_to_copy(syncpoint, &value, sizeof(*syncpoint)));
|
|
}
|
|
|
|
return rv;
|
|
}
|
|
|
|
#include <syscalls/maxim_ds3231_get_syncpoint_mrsh.c>
|
|
|
|
int z_vrfy_maxim_ds3231_req_syncpoint(const struct device *dev,
|
|
struct k_poll_signal *sig)
|
|
{
|
|
Z_OOPS(Z_SYSCALL_SPECIFIC_DRIVER(dev, K_OBJ_DRIVER_COUNTER, &ds3231_api));
|
|
if (sig != NULL) {
|
|
Z_OOPS(Z_SYSCALL_OBJ(sig, K_OBJ_POLL_SIGNAL));
|
|
}
|
|
|
|
return z_impl_maxim_ds3231_req_syncpoint(dev, sig);
|
|
}
|
|
|
|
#include <syscalls/maxim_ds3231_req_syncpoint_mrsh.c>
|
|
|
|
#endif /* CONFIG_USERSPACE */
|