zephyr/drivers/i2c/i2c_dw.h

129 lines
3.3 KiB
C

/* dw_i2c.h - header for Design Ware I2C operations */
/*
* Copyright (c) 2015 Intel Corporation
*
* SPDX-License-Identifier: Apache-2.0
*/
#ifndef ZEPHYR_DRIVERS_I2C_I2C_DW_H_
#define ZEPHYR_DRIVERS_I2C_I2C_DW_H_
#include <i2c.h>
#include <stdbool.h>
#if DT_INST_0_SNPS_DESIGNWARE_I2C_PCIE || \
DT_INST_1_SNPS_DESIGNWARE_I2C_PCIE || \
DT_INST_2_SNPS_DESIGNWARE_I2C_PCIE || \
DT_INST_3_SNPS_DESIGNWARE_I2C_PCIE || \
DT_INST_4_SNPS_DESIGNWARE_I2C_PCIE || \
DT_INST_5_SNPS_DESIGNWARE_I2C_PCIE || \
DT_INST_6_SNPS_DESIGNWARE_I2C_PCIE || \
DT_INST_7_SNPS_DESIGNWARE_I2C_PCIE
BUILD_ASSERT_MSG(IS_ENABLED(CONFIG_PCIE), "DW I2C in DT needs CONFIG_PCIE");
#define I2C_DW_PCIE_ENABLED
#include <drivers/pcie/pcie.h>
#endif
#ifdef __cplusplus
extern "C" {
#endif
#define I2C_DW_MAGIC_KEY 0x44570140
typedef void (*i2c_isr_cb_t)(struct device *port);
#define IC_ACTIVITY (1 << 0)
#define IC_ENABLE_BIT (1 << 0)
/* dev->state values from IC_DATA_CMD Data transfer mode settings (bit 8) */
#define I2C_DW_STATE_READY (0)
#define I2C_DW_CMD_SEND (1 << 0)
#define I2C_DW_CMD_RECV (1 << 1)
#define I2C_DW_CMD_ERROR (1 << 2)
#define I2C_DW_BUSY (1 << 3)
#define DW_ENABLE_TX_INT_I2C_MASTER (DW_INTR_STAT_TX_OVER | \
DW_INTR_STAT_TX_EMPTY | \
DW_INTR_STAT_TX_ABRT | \
DW_INTR_STAT_STOP_DET)
#define DW_ENABLE_RX_INT_I2C_MASTER (DW_INTR_STAT_RX_UNDER | \
DW_INTR_STAT_RX_OVER | \
DW_INTR_STAT_RX_FULL | \
DW_INTR_STAT_STOP_DET)
#define DW_ENABLE_TX_INT_I2C_SLAVE (DW_INTR_STAT_RD_REQ | \
DW_INTR_STAT_TX_ABRT | \
DW_INTR_STAT_STOP_DET)
#define DW_ENABLE_RX_INT_I2C_SLAVE (DW_INTR_STAT_RX_FULL | \
DW_INTR_STAT_STOP_DET)
#define DW_DISABLE_ALL_I2C_INT 0x00000000
/* IC_CON Low count and high count default values */
/* TODO verify values for high and fast speed */
#define I2C_STD_HCNT (CONFIG_I2C_DW_CLOCK_SPEED * 4)
#define I2C_STD_LCNT (CONFIG_I2C_DW_CLOCK_SPEED * 5)
#define I2C_FS_HCNT ((CONFIG_I2C_DW_CLOCK_SPEED * 6) / 8)
#define I2C_FS_LCNT ((CONFIG_I2C_DW_CLOCK_SPEED * 7) / 8)
#define I2C_HS_HCNT ((CONFIG_I2C_DW_CLOCK_SPEED * 6) / 8)
#define I2C_HS_LCNT ((CONFIG_I2C_DW_CLOCK_SPEED * 7) / 8)
/*
* DesignWare speed values don't directly translate from the Zephyr speed
* selections in include/i2c.h so here we do a little translation
*/
#define I2C_DW_SPEED_STANDARD 0x1
#define I2C_DW_SPEED_FAST 0x2
#define I2C_DW_SPEED_FAST_PLUS 0x2
#define I2C_DW_SPEED_HIGH 0x3
/*
* These values have been randomly selected. It would be good to test different
* watermark levels for performance capabilities
*/
#define I2C_DW_TX_WATERMARK 2
#define I2C_DW_RX_WATERMARK 7
#define I2C_DW_FIFO_DEPTH 16
struct i2c_dw_rom_config {
i2c_isr_cb_t config_func;
u32_t bitrate;
#ifdef I2C_DW_PCIE_ENABLED
bool pcie;
pcie_bdf_t pcie_bdf;
pcie_id_t pcie_id;
#endif /* I2C_DW_PCIE_ENABLED */
};
struct i2c_dw_dev_config {
u32_t base_address;
struct k_sem device_sync_sem;
u32_t app_config;
u8_t *xfr_buf;
u32_t xfr_len;
u32_t rx_pending;
u16_t hcnt;
u16_t lcnt;
volatile u8_t state; /* last direction of transfer */
u8_t request_bytes;
u8_t xfr_flags;
bool support_hs_mode;
};
#ifdef __cplusplus
}
#endif
#endif /* ZEPHYR_DRIVERS_I2C_I2C_DW_H_ */