315 lines
7.9 KiB
Plaintext
315 lines
7.9 KiB
Plaintext
# Kconfig - I2C configuration options
|
|
|
|
#
|
|
# Copyright (c) 2015 Intel Corporation
|
|
#
|
|
# SPDX-License-Identifier: Apache-2.0
|
|
#
|
|
|
|
#
|
|
# I2C options
|
|
#
|
|
menuconfig I2C
|
|
bool "I2C Drivers"
|
|
help
|
|
Enable I2C Driver Configuration
|
|
|
|
if I2C
|
|
|
|
# Include these first so that any properties (e.g. defaults) below can be
|
|
# overridden (by defining symbols in multiple locations)
|
|
source "drivers/i2c/Kconfig.cc13xx_cc26xx"
|
|
source "drivers/i2c/Kconfig.dw"
|
|
source "drivers/i2c/Kconfig.esp32"
|
|
source "drivers/i2c/slave/Kconfig"
|
|
source "drivers/i2c/Kconfig.gpio"
|
|
source "drivers/i2c/Kconfig.xec"
|
|
source "drivers/i2c/Kconfig.nrfx"
|
|
source "drivers/i2c/Kconfig.qmsi"
|
|
source "drivers/i2c/Kconfig.sbcon"
|
|
source "drivers/i2c/Kconfig.sifive"
|
|
source "drivers/i2c/Kconfig.stm32"
|
|
source "drivers/i2c/Kconfig.sam0"
|
|
|
|
|
|
config I2C_INIT_PRIORITY
|
|
int "Init priority"
|
|
default 60
|
|
help
|
|
I2C device driver initialization priority.
|
|
|
|
|
|
module = I2C
|
|
module-str = i2c
|
|
source "subsys/logging/Kconfig.template.log_config"
|
|
|
|
config I2C_0
|
|
bool "Enable I2C Port 0"
|
|
|
|
config I2C_0_NAME
|
|
string "Port 0 device name"
|
|
depends on I2C_0 && !HAS_DTS_I2C
|
|
default "I2C_0"
|
|
|
|
config I2C_0_DEFAULT_CFG
|
|
hex "Port 0 default configuration"
|
|
depends on I2C_0 && !HAS_DTS_I2C
|
|
default 0x0
|
|
help
|
|
Allows the I2C port to be brought up with a default configuration.
|
|
This is useful to set if other drivers depend upon using the I2C bus
|
|
before the application has a chance to custom configure the port.
|
|
Setting this value does not prohibit the application from customizing
|
|
the values later. Refer to include/i2c.h file for proper values.
|
|
|
|
config I2C_0_IRQ_PRI
|
|
int "Port 0 interrupt priority"
|
|
depends on I2C_0 && !HAS_DTS_I2C
|
|
help
|
|
IRQ priority.
|
|
|
|
config I2C_1
|
|
bool "Enable I2C Port 1"
|
|
|
|
config I2C_1_NAME
|
|
string "Port 1 device name"
|
|
default "I2C_1"
|
|
depends on I2C_1 && !HAS_DTS_I2C
|
|
|
|
config I2C_1_DEFAULT_CFG
|
|
hex "Port 1 default configuration"
|
|
depends on I2C_1 && !HAS_DTS_I2C
|
|
default 0x0
|
|
help
|
|
Allows the I2C port to be brought up with a default configuration.
|
|
This is useful to set if other drivers depend upon using the I2C bus
|
|
before the application has a chance to custom configure the port.
|
|
Setting this value does not prohibit the application from customizing
|
|
the values later. Refer to include/i2c.h file for proper values.
|
|
|
|
config I2C_1_IRQ_PRI
|
|
int "Port 1 interrupt priority"
|
|
depends on I2C_1 && !HAS_DTS_I2C
|
|
help
|
|
IRQ priority.
|
|
|
|
config I2C_2
|
|
bool "Enable I2C Port 2"
|
|
|
|
config I2C_2_NAME
|
|
string "Port 2 device name"
|
|
default "I2C_2"
|
|
depends on I2C_2 && !HAS_DTS_I2C
|
|
|
|
config I2C_2_DEFAULT_CFG
|
|
hex "Port 2 default configuration"
|
|
depends on I2C_2 && !HAS_DTS_I2C
|
|
default 0x0
|
|
help
|
|
Allows the I2C port to be brought up with a default configuration.
|
|
This is useful to set if other drivers depend upon using the I2C bus
|
|
before the application has a chance to custom configure the port.
|
|
Setting this value does not prohibit the application from customizing
|
|
the values later. Refer to include/i2c.h file for proper values.
|
|
|
|
config I2C_2_IRQ_PRI
|
|
int "Port 2 interrupt priority"
|
|
depends on I2C_2 && !HAS_DTS_I2C
|
|
help
|
|
IRQ priority.
|
|
|
|
config I2C_3
|
|
bool "Enable I2C Port 3"
|
|
|
|
config I2C_3_NAME
|
|
string "Port 3 device name"
|
|
depends on I2C_3 && !HAS_DTS_I2C
|
|
default "I2C_3"
|
|
|
|
config I2C_3_DEFAULT_CFG
|
|
hex "Port 3 default configuration"
|
|
depends on I2C_3 && !HAS_DTS_I2C
|
|
default 0x0
|
|
help
|
|
Allows the I2C port to be brought up with a default configuration.
|
|
This is useful to set if other drivers depend upon using the I2C bus
|
|
before the application has a chance to custom configure the port.
|
|
Setting this value does not prohibit the application from customizing
|
|
the values later. Refer to include/i2c.h file for proper values.
|
|
|
|
config I2C_3_IRQ_PRI
|
|
int "Port 3 interrupt priority"
|
|
depends on I2C_3 && !HAS_DTS_I2C
|
|
help
|
|
IRQ priority.
|
|
|
|
config I2C_4
|
|
bool "Enable I2C Port 4"
|
|
|
|
config I2C_4_NAME
|
|
string "Port 4 device name"
|
|
depends on I2C_4 && !HAS_DTS_I2C
|
|
default "I2C_4"
|
|
|
|
config I2C_4_DEFAULT_CFG
|
|
hex "Port 4 default configuration"
|
|
depends on I2C_4 && !HAS_DTS_I2C
|
|
default 0x0
|
|
help
|
|
Allows the I2C port to be brought up with a default configuration.
|
|
This is useful to set if other drivers depend upon using the I2C bus
|
|
before the application has a chance to custom configure the port.
|
|
Setting this value does not prohibit the application from customizing
|
|
the values later. Refer to include/i2c.h file for proper values.
|
|
|
|
config I2C_4_IRQ_PRI
|
|
int "Port 4 interrupt priority"
|
|
depends on I2C_4 && !HAS_DTS_I2C
|
|
help
|
|
IRQ priority.
|
|
|
|
config I2C_5
|
|
bool "Enable I2C Port 5"
|
|
|
|
config I2C_5_NAME
|
|
string "Port 5 device name"
|
|
depends on I2C_5 && !HAS_DTS_I2C
|
|
default "I2C_5"
|
|
|
|
config I2C_5_DEFAULT_CFG
|
|
hex "Port 5 default configuration"
|
|
depends on I2C_5 && !HAS_DTS_I2C
|
|
default 0x0
|
|
help
|
|
Allows the I2C port to be brought up with a default configuration.
|
|
This is useful to set if other drivers depend upon using the I2C bus
|
|
before the application has a chance to custom configure the port.
|
|
Setting this value does not prohibit the application from customizing
|
|
the values later. Refer to include/i2c.h file for proper values.
|
|
|
|
config I2C_5_IRQ_PRI
|
|
int "Port 5 interrupt priority"
|
|
depends on I2C_5 && !HAS_DTS_I2C
|
|
help
|
|
IRQ priority.
|
|
|
|
config I2C_6
|
|
bool "Enable I2C Port 6"
|
|
|
|
config I2C_6_NAME
|
|
string "Port 6 device name"
|
|
depends on I2C_6 && !HAS_DTS_I2C
|
|
default "I2C_6"
|
|
|
|
config I2C_6_DEFAULT_CFG
|
|
hex "Port 6 default configuration"
|
|
depends on I2C_6 && !HAS_DTS_I2C
|
|
default 0x0
|
|
help
|
|
Allows the I2C port to be brought up with a default configuration.
|
|
This is useful to set if other drivers depend upon using the I2C bus
|
|
before the application has a chance to custom configure the port.
|
|
Setting this value does not prohibit the application from customizing
|
|
the values later. Refer to include/i2c.h file for proper values.
|
|
|
|
config I2C_6_IRQ_PRI
|
|
int "Port 6 interrupt priority"
|
|
depends on I2C_6 && !HAS_DTS_I2C
|
|
help
|
|
IRQ priority.
|
|
|
|
config I2C_7
|
|
bool "Enable I2C Port 7"
|
|
|
|
config I2C_7_NAME
|
|
string "Port 7 device name"
|
|
depends on I2C_7 && !HAS_DTS_I2C
|
|
default "I2C_7"
|
|
|
|
config I2C_7_DEFAULT_CFG
|
|
hex "Port 7 default configuration"
|
|
depends on I2C_7 && !HAS_DTS_I2C
|
|
default 0x0
|
|
help
|
|
Allows the I2C port to be brought up with a default configuration.
|
|
This is useful to set if other drivers depend upon using the I2C bus
|
|
before the application has a chance to custom configure the port.
|
|
Setting this value does not prohibit the application from customizing
|
|
the values later. Refer to include/i2c.h file for proper values.
|
|
|
|
config I2C_7_IRQ_PRI
|
|
int "Port 7 interrupt priority"
|
|
depends on I2C_7 && !HAS_DTS_I2C
|
|
help
|
|
IRQ priority.
|
|
|
|
config I2C_GECKO
|
|
bool "Gecko I2C driver"
|
|
depends on HAS_SILABS_GECKO
|
|
select SOC_GECKO_I2C
|
|
help
|
|
Enable the SiLabs Gecko I2C bus driver.
|
|
|
|
config I2C_SAM_TWIHS
|
|
bool "Atmel SAM (TWIHS) I2C driver"
|
|
depends on SOC_FAMILY_SAM
|
|
select HAS_DTS_I2C
|
|
help
|
|
Enable Atmel SAM MCU Family (TWIHS) I2C bus driver.
|
|
|
|
config I2C_SAM_TWI
|
|
bool "Atmel SAM (TWI) I2C driver"
|
|
depends on SOC_FAMILY_SAM
|
|
select HAS_DTS_I2C
|
|
help
|
|
Enable Atmel SAM MCU Family (TWI) I2C bus driver.
|
|
|
|
config I2C_MCUX
|
|
bool "MCUX I2C driver"
|
|
depends on HAS_MCUX
|
|
select HAS_DTS_I2C
|
|
help
|
|
Enable the mcux I2C driver.
|
|
|
|
config I2C_MCUX_LPI2C
|
|
bool "MCUX LPI2C driver"
|
|
depends on HAS_MCUX_LPI2C && CLOCK_CONTROL
|
|
select HAS_DTS_I2C
|
|
help
|
|
Enable the mcux LPI2C driver.
|
|
|
|
config I2C_IMX
|
|
bool "i.MX I2C driver"
|
|
depends on HAS_IMX_I2C
|
|
select HAS_DTS_I2C
|
|
help
|
|
Enable the i.MX I2C driver.
|
|
|
|
config I2C_CC32XX
|
|
bool "CC32XX I2C driver"
|
|
depends on SOC_SERIES_CC32XX
|
|
select HAS_DTS_I2C
|
|
help
|
|
Enable the CC32XX I2C driver.
|
|
|
|
config I2C_BITBANG
|
|
bool
|
|
help
|
|
Enable library used for software driven (bit banging) I2C support
|
|
|
|
config I2C_NIOS2
|
|
bool "Nios-II I2C driver"
|
|
depends on HAS_ALTERA_HAL
|
|
select HAS_DTS_I2C
|
|
help
|
|
Enable the Nios-II I2C driver.
|
|
|
|
config I2C_RV32M1_LPI2C
|
|
bool "RV32M1 LPI2C driver"
|
|
depends on HAS_RV32M1_LPI2C && CLOCK_CONTROL
|
|
select HAS_DTS_I2C
|
|
help
|
|
Enable the RV32M1 LPI2C driver.
|
|
|
|
endif # I2C
|