99 lines
3.6 KiB
YAML
99 lines
3.6 KiB
YAML
# Copyright (c) 2020 Linaro Limited
|
|
# SPDX-License-Identifier: Apache-2.0
|
|
|
|
description: STM32 Pin controller Node
|
|
|
|
compatible: "st,stm32f1-pinctrl"
|
|
|
|
include: [base.yaml]
|
|
|
|
properties:
|
|
reg:
|
|
required: true
|
|
|
|
child-binding:
|
|
description: |
|
|
This binding gives a base representation of the STM32F1 pins configration
|
|
|
|
properties:
|
|
pinmux:
|
|
required: true
|
|
type: int
|
|
description: |
|
|
Adapted from https://github.com/torvalds/linux/blob/master/Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.yaml
|
|
Integer array, represents gpio pin number and mux setting.
|
|
These defines are calculated as: ((port * 16 + line) << 8) | (function << 6) | remap)
|
|
With:
|
|
- port: The gpio port index (PA = 0, PB = 1, ..., PK = 11)
|
|
- line: The line offset within the port (PA0 = 0, PA1 = 1, ..., PA15 = 15)
|
|
- function: The configuration mode, can be:
|
|
* 0 : Alternate function output
|
|
* 1 : Input
|
|
* 2 : Analog
|
|
- remap: The pin remapping configuration. It allows to assign the pin
|
|
function to a different peripheral. Remain configuration can be:
|
|
* 0 : No remap
|
|
* 1 : Partial remap 1
|
|
* 2 : Partial remap 2
|
|
* 3 : Partial remap 3
|
|
* 4 : Full remap
|
|
To simplify the usage, macro is available to generate "pinmux" field.
|
|
This macro is available here:
|
|
-include/dt-bindings/pinctrl/stm32f1-pinctrl.h
|
|
Some examples of macro usage:
|
|
GPIO A9 set as alernate with no remap
|
|
... {
|
|
pinmux = <STM32F1_PINMUX('A', 9, ALTERNATE, REMAP_NO)>;
|
|
};
|
|
GPIO A9 set as alernate with full remap
|
|
... {
|
|
pinmux = <STM32F1_PINMUX('A', 9, ALTERNATE, REMAP_FULL)>;
|
|
};
|
|
GPIO A9 set as input
|
|
... {
|
|
pinmux = <STM32F1_PINMUX('A', 9, GPIO_IN, REMAP_NO)>;
|
|
};
|
|
|
|
bias-disable:
|
|
required: false
|
|
type: boolean
|
|
description: Pin bias (push-pull) disabled. This is the default pin
|
|
configuration and will be applied if no bias- property is
|
|
specified. Only available in input mode ("floating" configuration).
|
|
|
|
bias-pull-down:
|
|
required: false
|
|
type: boolean
|
|
description: Weak pull down resistor enabled. Not compatible with
|
|
output configuration modes (atlernate or general purpose output).
|
|
|
|
bias-pull-up:
|
|
required: false
|
|
type: boolean
|
|
description: Weak pull up resistor enabled. Not compatible with
|
|
output configuration modes (atlernate or general purpose output).
|
|
|
|
drive-push-pull:
|
|
required: false
|
|
type: boolean
|
|
description: Pin driven actively high and low. This is the default pin
|
|
configueration and will be applied if no drive- property is
|
|
specified. Only valid for output configuration modes.
|
|
|
|
drive-open-drain:
|
|
required: false
|
|
type: boolean
|
|
description: Pin driven in open drain. Only valid for output
|
|
configuration modes.
|
|
|
|
slew-rate:
|
|
required: false
|
|
type: string
|
|
default: "max-speed-10mhz"
|
|
enum:
|
|
- "max-speed-10mhz" # Default
|
|
- "max-speed-2mhz"
|
|
- "max-speed-50mhz"
|
|
description: Pin output mode, maximum achievable speed. Only applies
|
|
to output mode (alternate)..
|