zephyr/arch/riscv/core/thread.c

280 lines
7.1 KiB
C

/*
* Copyright (c) 2016 Jean-Paul Etienne <fractalclone@gmail.com>
* Copyright (c) 2020 BayLibre, SAS
*
* SPDX-License-Identifier: Apache-2.0
*/
#include <kernel.h>
#include <ksched.h>
#include <arch/riscv/csr.h>
#include <stdio.h>
#include <core_pmp.h>
#ifdef CONFIG_USERSPACE
/*
* Glogal variable used to know the current mode running.
* Is not boolean because it must match the PMP granularity of the arch.
*/
ulong_t is_user_mode;
bool irq_flag;
#endif
void z_thread_entry_wrapper(k_thread_entry_t thread,
void *arg1,
void *arg2,
void *arg3);
void arch_new_thread(struct k_thread *thread, k_thread_stack_t *stack,
char *stack_ptr, k_thread_entry_t entry,
void *p1, void *p2, void *p3)
{
struct __esf *stack_init;
#ifdef CONFIG_RISCV_SOC_CONTEXT_SAVE
const struct soc_esf soc_esf_init = {SOC_ESF_INIT};
#endif
/* Initial stack frame for thread */
stack_init = Z_STACK_PTR_TO_FRAME(struct __esf, stack_ptr);
/* Setup the initial stack frame */
stack_init->a0 = (ulong_t)entry;
stack_init->a1 = (ulong_t)p1;
stack_init->a2 = (ulong_t)p2;
stack_init->a3 = (ulong_t)p3;
#ifdef CONFIG_THREAD_LOCAL_STORAGE
stack_init->tp = (ulong_t)thread->tls;
#endif
/*
* Following the RISC-V architecture,
* the MSTATUS register (used to globally enable/disable interrupt),
* as well as the MEPC register (used to by the core to save the
* value of the program counter at which an interrupt/exception occcurs)
* need to be saved on the stack, upon an interrupt/exception
* and restored prior to returning from the interrupt/exception.
* This shall allow to handle nested interrupts.
*
* Given that context switching is performed via a system call exception
* within the RISCV architecture implementation, initially set:
* 1) MSTATUS to MSTATUS_DEF_RESTORE in the thread stack to enable
* interrupts when the newly created thread will be scheduled;
* 2) MEPC to the address of the z_thread_entry_wrapper in the thread
* stack.
* Hence, when going out of an interrupt/exception/context-switch,
* after scheduling the newly created thread:
* 1) interrupts will be enabled, as the MSTATUS register will be
* restored following the MSTATUS value set within the thread stack;
* 2) the core will jump to z_thread_entry_wrapper, as the program
* counter will be restored following the MEPC value set within the
* thread stack.
*/
stack_init->mstatus = MSTATUS_DEF_RESTORE;
#if defined(CONFIG_PMP_STACK_GUARD) || defined(CONFIG_USERSPACE)
z_riscv_pmp_init_thread(thread);
#endif /* CONFIG_PMP_STACK_GUARD || CONFIG_USERSPACE */
#if defined(CONFIG_PMP_STACK_GUARD)
if ((thread->base.user_options & K_USER) == 0) {
/* Enable pmp for machine mode if thread isn't a user*/
stack_init->mstatus |= MSTATUS_MPRV;
}
#endif /* CONFIG_PMP_STACK_GUARD */
#if defined(CONFIG_FPU) && defined(CONFIG_FPU_SHARING)
if ((thread->base.user_options & K_FP_REGS) != 0) {
stack_init->mstatus |= MSTATUS_FS_INIT;
}
stack_init->fp_state = 0;
#endif
stack_init->mepc = (ulong_t)z_thread_entry_wrapper;
#if defined(CONFIG_USERSPACE)
thread->arch.priv_stack_start = 0;
thread->arch.user_sp = 0;
if ((thread->base.user_options & K_USER) != 0) {
stack_init->mepc = (ulong_t)k_thread_user_mode_enter;
} else {
stack_init->mepc = (ulong_t)z_thread_entry_wrapper;
#if defined(CONFIG_PMP_STACK_GUARD)
z_riscv_init_stack_guard(thread);
#endif /* CONFIG_PMP_STACK_GUARD */
}
#else
stack_init->mepc = (ulong_t)z_thread_entry_wrapper;
#if defined(CONFIG_PMP_STACK_GUARD)
z_riscv_init_stack_guard(thread);
#endif /* CONFIG_PMP_STACK_GUARD */
#endif /* CONFIG_USERSPACE */
#ifdef CONFIG_RISCV_SOC_CONTEXT_SAVE
stack_init->soc_context = soc_esf_init;
#endif
thread->callee_saved.sp = (ulong_t)stack_init;
}
#if defined(CONFIG_FPU) && defined(CONFIG_FPU_SHARING)
int arch_float_disable(struct k_thread *thread)
{
unsigned int key;
if (thread != _current) {
return -EINVAL;
}
if (arch_is_in_isr()) {
return -EINVAL;
}
/* Ensure a preemptive context switch does not occur */
key = irq_lock();
/* Disable all floating point capabilities for the thread */
thread->base.user_options &= ~K_FP_REGS;
/* Clear the FS bits to disable the FPU. */
__asm__ volatile (
"mv t0, %0\n"
"csrrc x0, mstatus, t0\n"
:
: "r" (MSTATUS_FS_MASK)
);
irq_unlock(key);
return 0;
}
int arch_float_enable(struct k_thread *thread, unsigned int options)
{
unsigned int key;
if (thread != _current) {
return -EINVAL;
}
if (arch_is_in_isr()) {
return -EINVAL;
}
/* Ensure a preemptive context switch does not occur */
key = irq_lock();
/* Enable all floating point capabilities for the thread. */
thread->base.user_options |= K_FP_REGS;
/* Set the FS bits to Initial to enable the FPU. */
__asm__ volatile (
"mv t0, %0\n"
"csrrs x0, mstatus, t0\n"
:
: "r" (MSTATUS_FS_INIT)
);
irq_unlock(key);
return 0;
}
#endif /* CONFIG_FPU && CONFIG_FPU_SHARING */
#ifdef CONFIG_USERSPACE
/* Function used by Zephyr to switch a supervisor thread to a user thread */
FUNC_NORETURN void arch_user_mode_enter(k_thread_entry_t user_entry,
void *p1, void *p2, void *p3)
{
arch_syscall_invoke5((uintptr_t) arch_user_mode_enter,
(uintptr_t) user_entry,
(uintptr_t) p1,
(uintptr_t) p2,
(uintptr_t) p3,
FORCE_SYSCALL_ID);
CODE_UNREACHABLE;
}
/*
* User space entry function
*
* This function is the entry point to user mode from privileged execution.
* The conversion is one way, and threads which transition to user mode do
* not transition back later, unless they are doing system calls.
*/
FUNC_NORETURN void z_riscv_user_mode_enter_syscall(k_thread_entry_t user_entry,
void *p1, void *p2, void *p3)
{
ulong_t top_of_user_stack = 0U;
uintptr_t status;
/* Set up privileged stack */
#ifdef CONFIG_GEN_PRIV_STACKS
_current->arch.priv_stack_start =
(uint32_t)z_priv_stack_find(_current->stack_obj);
#else
_current->arch.priv_stack_start =
(uint32_t)(_current->stack_obj) +
Z_RISCV_STACK_GUARD_SIZE;
#endif /* CONFIG_GEN_PRIV_STACKS */
top_of_user_stack = Z_STACK_PTR_ALIGN(
_current->stack_info.start +
_current->stack_info.size -
_current->stack_info.delta);
/* Set next CPU status to user mode */
status = csr_read(mstatus);
status = INSERT_FIELD(status, MSTATUS_MPP, PRV_U);
status = INSERT_FIELD(status, MSTATUS_MPRV, 0);
csr_write(mstatus, status);
csr_write(mepc, z_thread_entry_wrapper);
/* Set up Physical Memory Protection */
#if defined(CONFIG_PMP_STACK_GUARD)
z_riscv_init_stack_guard(_current);
#endif
z_riscv_init_user_accesses(_current);
z_riscv_configure_user_allowed_stack(_current);
is_user_mode = true;
__asm__ volatile ("mv a0, %1"
: "=r" (user_entry)
: "r" (user_entry)
: "memory");
__asm__ volatile ("mv a1, %1"
: "=r" (p1)
: "r" (p1)
: "memory");
__asm__ volatile ("mv a2, %1"
: "=r" (p2)
: "r" (p2)
: "memory");
__asm__ volatile ("mv a3, %1"
: "=r" (p3)
: "r" (p3)
: "memory");
__asm__ volatile ("mv sp, %1"
: "=r" (top_of_user_stack)
: "r" (top_of_user_stack)
: "memory");
__asm__ volatile ("mret");
CODE_UNREACHABLE;
}
#endif /* CONFIG_USERSPACE */