zephyr/arch/arc/core/switch.S

161 lines
3.6 KiB
ArmAsm

/*
* Copyright (c) 2019 Synopsys.
*
* SPDX-License-Identifier: Apache-2.0
*/
/**
* @file
* @brief Thread context switching
*
* This module implements the routines necessary for thread context switching
* on ARCv2 CPUs.
*
* See isr_wrapper.S for details.
*/
#include <kernel_structs.h>
#include <offsets_short.h>
#include <toolchain.h>
#include <linker/sections.h>
#include <arch/cpu.h>
#include <v2/irq.h>
#include <swap_macros.h>
GTEXT(z_arc_switch)
/**
*
* @brief Initiate a cooperative context switch
*
* The arch_switch routine is invoked by various kernel services to effect
* a cooperative context switch. Prior to invoking arch_switch, the caller
* disables interrupts via irq_lock()
* Given that arch_switch() is called to effect a cooperative context switch,
* the caller-saved integer registers are saved on the stack by the function
* call preamble to arch_switch. This creates a custom stack frame that will
* be popped when returning from arch_switch, but is not suitable for handling
* a return from an exception. Thus, the fact that the thread is pending because
* of a cooperative call to arch_switch() has to be recorded via the
* _CAUSE_COOP code in the relinquish_cause of the thread's k_thread structure.
* The _rirq_exit()/_firq_exit() code will take care of doing the right thing
* to restore the thread status.
*
* When arch_switch() is invoked, we know the decision to perform a context
* switch or not has already been taken and a context switch must happen.
*
*
* C function prototype:
*
* void arch_switch(void *switch_to, void **switched_from);
*
*/
SECTION_FUNC(TEXT, z_arc_switch)
/*
* r0 = new_thread->switch_handle = switch_to thread,
* r1 = &old_thread->switch_handle
* get old_thread from r1
*/
sub r2, r1, ___thread_t_switch_handle_OFFSET
st _CAUSE_COOP, [r2, _thread_offset_to_relinquish_cause]
/*
* Save status32 and blink on the stack before the callee-saved registers.
* This is the same layout as the start of an IRQ stack frame.
*/
lr r3, [_ARC_V2_STATUS32]
push_s r3
#ifdef CONFIG_ARC_HAS_SECURE
#ifdef CONFIG_ARC_SECURE_FIRMWARE
lr r3, [_ARC_V2_SEC_STAT]
#else
mov_s r3, 0
#endif
push_s r3
#endif
push_s blink
_store_old_thread_callee_regs
/* disable stack checking here, as sp will be changed to target
* thread'sp
*/
_disable_stack_checking r3
mov_s r2, r0
_load_new_thread_callee_regs
breq r3, _CAUSE_RIRQ, _switch_return_from_rirq
nop_s
breq r3, _CAUSE_FIRQ, _switch_return_from_firq
nop_s
/* fall through to _switch_return_from_coop */
.align 4
_switch_return_from_coop:
pop_s blink /* pc into blink */
#ifdef CONFIG_ARC_HAS_SECURE
pop_s r3 /* pop SEC_STAT */
#ifdef CONFIG_ARC_SECURE_FIRMWARE
sflag r3
#endif
#endif
pop_s r3 /* status32 into r3 */
kflag r3 /* write status32 */
#ifdef CONFIG_INSTRUMENT_THREAD_SWITCHING
push_s blink
bl z_thread_mark_switched_in
pop_s blink
#endif
j_s [blink]
.align 4
_switch_return_from_rirq:
_switch_return_from_firq:
_set_misc_regs_irq_switch_from_irq
/* use lowest interrupt priority to simulate
* a interrupt return to load left regs of new
* thread
*/
lr r3, [_ARC_V2_AUX_IRQ_ACT]
#ifdef CONFIG_ARC_SECURE_FIRMWARE
or r3, r3, (1 << (ARC_N_IRQ_START_LEVEL - 1))
#else
or r3, r3, (1 << (CONFIG_NUM_IRQ_PRIO_LEVELS - 1))
#endif
#ifdef CONFIG_ARC_NORMAL_FIRMWARE
mov_s r0, _ARC_V2_AUX_IRQ_ACT
mov_s r1, r3
mov_s r6, ARC_S_CALL_AUX_WRITE
sjli SJLI_CALL_ARC_SECURE
#else
sr r3, [_ARC_V2_AUX_IRQ_ACT]
#endif
#ifdef CONFIG_INSTRUMENT_THREAD_SWITCHING
push_s blink
bl z_thread_mark_switched_in
pop_s blink
#endif
rtie