Application implementing 802.15.4 "serial-radio" protocol.
How to use:
1. Build and flash Zephyr application to Quark board with 802.15.4 radio,
at the moment CC2520 radio is supported.
2. Connect board to Linux PC, /dev/ttyACM[number] should appear
3. Run Contiki-based native border router (6lbr, native-router, etc)
Example for Contiki:
$ cd examples/ipv6/native-border-router
$ make
$ sudo ./border-router.native -v5 -s ttyACM0 fd01::1/64
Now you have Contiki native border router, simple web server should show some
802.15.4 devices. Web server address is printed in the border-router output
screen:
...
Server IPv6 addresses:
0x62c5c0: =>fd01::212:4b00:531f:113a
...
Go to http://[fd01::212:4b00:531f:113a]/
It shall show you Neighbors and Routes.
PS: Make sure your disto ModemManager is disabled, otherwise it sends AT commands
to our device ;)
$ sudo systemctl disable ModemManager.service
578ae40761