zephyr/samples/net/wpanusb
Tomasz Bursztyka 6158dfdda6 samples: net: STDOUT_CONSOLE is not necessary
printk can do the job properly.

Change-Id: Ib743328e046bdb29be26adfe5cd007aaa758cd64
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
2017-01-02 10:03:17 +01:00
..
src shell: move shell to its own subsystem 2016-12-25 19:35:11 +00:00
Makefile samples: remove obsolete KERNEL_TYPE 2016-12-20 01:12:43 +00:00
README wpanusb: Export ieee802.14.5 over USB 2016-12-02 12:40:46 +02:00
prj.conf samples: net: STDOUT_CONSOLE is not necessary 2017-01-02 10:03:17 +01:00
wpan-radio-spec.txt wpanusb: Update wpan protocol document 2016-12-02 12:41:05 +02:00

README

This application exports ieee802154 radio over USB to be used in other
Operation Systems like Linux. In this scenario Linux SoftMAC driver would
be used implementing ieee802154 stack inside Linux.

When connected to Linux it is recognized by Linux with wpanusb kernel
driver as:

...
T:  Bus=01 Lev=02 Prnt=02 Port=00 Cnt=01 Dev#=  3 Spd=12  MxCh= 0
D:  Ver= 1.10 Cls=ff(vend.) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=8086 ProdID=ff03 Rev=01.00
C:  #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr=100mA
I:  If#= 0 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=00 Prot=00 Driver=wpanusb
...

bring it up with:

#!/bin/sh

PHY=`iwpan phy | grep wpan_phy | cut -d' ' -f2`

echo 'Using phy' $PHY

iwpan dev wpan0 set pan_id 0xabcd
iwpan dev wpan0 set short_addr 0xbeef
iwpan phy $PHY set channel 0 26
ip link add link wpan0 name lowpan0 type lowpan
ip link set wpan0 up
ip link set lowpan0 up