OrgZephyr/zephyr
OrgZephyr
/
zephyr
mirror of https://github.com/zephyrproject-rtos/zephyr.git
1
0
Fork 0
Code Issues Releases Wiki Activity
zephyr/doc/develop/test/twister.rst

1519 lines
53 KiB
ReStructuredText
Raw Blame History

This file contains ambiguous Unicode characters

This file contains Unicode characters that might be confused with other characters. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

.. _twister_script:
Test Runner (Twister)
#####################
Twister scans for the set of test applications in the git repository
and attempts to execute them. By default, it tries to build each test
application on boards marked as default in the board definition file.
The default options will build the majority of the test applications on a
defined set of boards and will run in an emulated environment if available for
the architecture or configuration being tested.
Because of the limited test execution coverage, twister
cannot guarantee local changes will succeed in the full build
environment, but it does sufficient testing by building samples and
tests for different boards and different configurations to help keep the
complete code tree buildable.
When using (at least) one ``-v`` option, twister's console output
shows for every test application how the test is run (qemu, native_sim, etc.) or
whether the binary was just built. There are a few reasons why twister
only builds a test and doesn't run it:
- The test is marked as ``build_only: true`` in its ``.yaml``
configuration file.
- The test configuration has defined a ``harness`` but you don't have
it or haven't set it up.
- The target device is not connected and not available for flashing
- You or some higher level automation invoked twister with
``--build-only``.
To run the script in the local tree, follow the steps below:
.. tabs::
.. group-tab:: Linux
.. code-block:: bash
$ source zephyr-env.sh
$ ./scripts/twister
.. group-tab:: Windows
.. code-block:: bat
zephyr-env.cmd
python .\scripts\twister
If you have a system with a large number of cores and plenty of free storage space,
you can build and run all possible tests using the following options:
.. tabs::
.. group-tab:: Linux
.. code-block:: bash
$ ./scripts/twister --all --enable-slow
.. group-tab:: Windows
.. code-block:: bat
python .\scripts\twister --all --enable-slow
This will build for all available boards and run all applicable tests in
a simulated (for example QEMU) environment.
If you want to run tests on one or more specific platforms, you can use
the ``--platform`` option, it is a platform filter for testing, with this
option, test suites will only be built/run on the platforms specified.
This option also supports different revisions of one same board,
you can use ``--platform board@revision`` to test on a specific revision.
The list of command line options supported by twister can be viewed using:
.. tabs::
.. group-tab:: Linux
.. code-block:: bash
$ ./scripts/twister --help
.. group-tab:: Windows
.. code-block:: bat
python .\scripts\twister --help
Board Configuration
*******************
To build tests for a specific board and to execute some of the tests on real
hardware or in an emulation environment such as QEMU a board configuration file
is required which is generic enough to be used for other tasks that require a
board inventory with details about the board and its configuration that is only
available during build time otherwise.
The board metadata file is located in the board directory and is structured
using the YAML markup language. The example below shows a board with a data
required for best test coverage for this specific board:
.. code-block:: yaml
identifier: frdm_k64f
name: NXP FRDM-K64F
type: mcu
arch: arm
toolchain:
- zephyr
- gnuarmemb
- xtools
supported:
- arduino_gpio
- arduino_i2c
- netif:eth
- adc
- i2c
- nvs
- spi
- gpio
- usb_device
- watchdog
- can
- pwm
testing:
default: true
identifier:
A string that matches how the board is defined in the build system. This same
string is used when building, for example when calling ``west build`` or
``cmake``:
.. code-block:: console
# with west
west build -b reel_board
# with cmake
cmake -DBOARD=reel_board ..
name:
The actual name of the board as it appears in marketing material.
type:
Type of the board or configuration, currently we support 2 types: mcu, qemu
simulation:
Simulator used to simulate the platform, e.g. qemu.
arch:
Architecture of the board
toolchain:
The list of supported toolchains that can build this board. This should match
one of the values used for :envvar:`ZEPHYR_TOOLCHAIN_VARIANT` when building on the command line
ram:
Available RAM on the board (specified in KB). This is used to match test scenario
requirements. If not specified we default to 128KB.
flash:
Available FLASH on the board (specified in KB). This is used to match test scenario
requirements. If not specified we default to 512KB.
supported:
A list of features this board supports. This can be specified as a single word
feature or as a variant of a feature class. For example:
.. code-block:: yaml
supported:
- pci
This indicates the board does support PCI. You can make a test scenario build or
run only on such boards, or:
.. code-block:: yaml
supported:
- netif:eth
- sensor:bmi16
A test scenario can depend on 'eth' to only test ethernet or on 'netif' to run
on any board with a networking interface.
testing:
testing relating keywords to provide best coverage for the features of this
board.
.. _twister_default_testing_board:
binaries:
A list of custom binaries to be kept for device testing.
default: [True|False]:
This is a default board, it will tested with the highest priority and is
covered when invoking the simplified twister without any additional
arguments.
ignore_tags:
Do not attempt to build (and therefore run) tests marked with this list of
tags.
only_tags:
Only execute tests with this list of tags on a specific platform.
.. _twister_board_timeout_multiplier:
timeout_multiplier: <float> (default 1)
Multiply each test scenario timeout by specified ratio. This option allows to tune timeouts only
for required platform. It can be useful in case naturally slow platform I.e.: HW board with
power-efficient but slow CPU or simulation platform which can perform instruction accurate
simulation but does it slowly.
env:
A list of environment variables. Twister will check if all these environment variables are set,
and otherwise skip this platform. This allows the user to define a platform which should be
used, for example, only if some required software or hardware is present, and to signal that
presence to twister using these environment variables.
Tests
******
Tests are detected by the presence of a ``testcase.yaml`` or a ``sample.yaml``
files in the application's project directory. This test application
configuration file may contain one or more entries in the tests section each
identifying a test scenario.
.. _twister_test_project_diagram:
.. figure:: figures/twister_test_project.svg
:alt: Twister and a Test applications' project.
:figclass: align-center
Twister and a Test applications' project.
Test application configurations are written using the YAML syntax and share the
same structure as samples.
A test scenario is a set of conditions or variables, defined in test scenario
entry, under which a set of test suites will be executed. Can be used
interchangeably with test scenario entry.
A test suite is a collection of test cases that are intended to be used to test
a software program to ensure it meets certain requirements. The test cases in a
test suite are often related or meant to be executed together.
The name of each test scenario needs to be unique in the context of the overall
test application and has to follow basic rules:
#. The format of the test scenario identifier shall be a string without any spaces or
special characters (allowed characters: alphanumeric and [\_=]) consisting
of multiple sections delimited with a dot (.).
#. Each test scenario identifier shall start with a section followed by a
subsection separated by a dot. For example, a test scenario that covers
semaphores in the kernel shall start with ``kernel.semaphore``.
#. All test scenario identifiers within a ``testcase.yaml`` file need to be unique. For
example a ``testcase.yaml`` file covering semaphores in the kernel can have:
* ``kernel.semaphore``: For general semaphore tests
* ``kernel.semaphore.stress``: Stress testing semaphores in the kernel.
#. Depending on the nature of the test, an identifier can consist of at least
two sections:
* Ztest tests: The individual test cases in the ztest testsuite will be
concatenated by dot (``.``) to the identifier in the ``testcase.yaml`` file
generating unique identifiers for every test case in the suite.
* Standalone tests and samples: This type of test should at least have 3
sections concatnated by dot (``.``) in the test scenario identifier in the
``testcase.yaml`` (or ``sample.yaml``) file.
The last section of the name shall signify the test case itself.
The following is an example test configuration with a few options that are
explained in this document.
.. code-block:: yaml
tests:
bluetooth.gatt:
build_only: true
platform_allow: qemu_cortex_m3 qemu_x86
tags: bluetooth
bluetooth.gatt.br:
build_only: true
extra_args: CONF_FILE="prj_br.conf"
filter: not CONFIG_DEBUG
platform_exclude: up_squared
platform_allow: qemu_cortex_m3 qemu_x86
tags: bluetooth
A sample with tests will have the same structure with additional information
related to the sample and what is being demonstrated:
.. code-block:: yaml
sample:
name: hello world
description: Hello World sample, the simplest Zephyr application
tests:
sample.basic.hello_world:
build_only: true
tags: tests
min_ram: 16
sample.basic.hello_world.singlethread:
build_only: true
extra_args: CONF_FILE=prj_single.conf
filter: not CONFIG_BT
tags: tests
min_ram: 16
The full canonical name for each test scenario is:``<path to test application>/<test scenario identifier>``
A test scenario entry is a a block or entry starting with test scenario
identifier in the YAML files.
Each test scenario entry in the test application configuration can define the
following key/value pairs:
.. _test_config_args:
tags: <list of tags> (required)
A set of string tags for the test scenario. Usually pertains to
functional domains but can be anything. Command line invocations
of this script can filter the set of tests to run based on tag.
skip: <True|False> (default False)
skip test scenario unconditionally. This can be used for broken tests for
example.
slow: <True|False> (default False)
Don't run this test scenario unless ``--enable-slow`` or ``--enable-slow-only`` was
passed in on the command line. Intended for time-consuming test scenarios that
are only run under certain circumstances, like daily builds. These test
scenarios are still compiled.
extra_args: <list of extra arguments>
Extra arguments to pass to build tool when building or running the
test scenario.
Using namespacing, it is possible to apply extra_args only to some
hardware. Currently architectures/platforms/simulation are supported:
.. code-block:: yaml
common:
tags: drivers adc
tests:
test:
depends_on: adc
test_async:
extra_args:
- arch:x86:CONFIG_ADC_ASYNC=y
- platform:qemu_x86:CONFIG_DEBUG=y
- platform:mimxrt1060_evk:SHIELD=rk043fn66hs_ctg
- simulation:qemu:CONFIG_MPU=y
extra_configs: <list of extra configurations>
Extra configuration options to be merged with a main prj.conf
when building or running the test scenario. For example:
.. code-block:: yaml
common:
tags: drivers adc
tests:
test:
depends_on: adc
test_async:
extra_configs:
- CONFIG_ADC_ASYNC=y
Using namespacing, it is possible to apply a configuration only to some
hardware. Currently both architectures and platforms are supported:
.. code-block:: yaml
common:
tags: drivers adc
tests:
test:
depends_on: adc
test_async:
extra_configs:
- arch:x86:CONFIG_ADC_ASYNC=y
- platform:qemu_x86:CONFIG_DEBUG=y
build_only: <True|False> (default False)
If true, twister will not try to run the test even if the test is runnable
on the platform.
This keyword is reserved for tests that are used to test if some code
actually builds. A ``build_only`` test is not designed to be run in any
environment and should not be testing any functionality, it only verifies
that the code builds.
This option is often used to test drivers and the fact that they are correctly
enabled in Zephyr and that the code builds, for example sensor drivers. Such
test shall not be used to verify the functionality of the driver.
build_on_all: <True|False> (default False)
If true, attempt to build test scenario on all available platforms. This is mostly
used in CI for increased coverage. Do not use this flag in new tests.
depends_on: <list of features>
A board or platform can announce what features it supports, this option
will enable the test only those platforms that provide this feature.
levels: <list of levels>
Test levels this test should be part of. If a level is present, this
test will be selectable using the command line option ``--level <level name>``
min_ram: <integer>
minimum amount of RAM in KB needed for this test to build and run. This is
compared with information provided by the board metadata.
min_flash: <integer>
minimum amount of ROM in KB needed for this test to build and run. This is
compared with information provided by the board metadata.
.. _twister_test_case_timeout:
timeout: <number of seconds>
Length of time to run test before automatically killing it.
Default to 60 seconds.
arch_allow: <list of arches, such as x86, arm, arc>
Set of architectures that this test scenario should only be run for.
arch_exclude: <list of arches, such as x86, arm, arc>
Set of architectures that this test scenario should not run on.
platform_allow: <list of platforms>
Set of platforms that this test scenario should only be run for. Do not use
this option to limit testing or building in CI due to time or resource
constraints, this option should only be used if the test or sample can
only be run on the allowed platform and nothing else.
integration_platforms: <YML list of platforms/boards>
This option limits the scope to the listed platforms when twister is
invoked with the ``--integration`` option. Use this instead of
platform_allow if the goal is to limit scope due to timing or
resource constraints.
platform_exclude: <list of platforms>
Set of platforms that this test scenario should not run on.
extra_sections: <list of extra binary sections>
When computing sizes, twister will report errors if it finds
extra, unexpected sections in the Zephyr binary unless they are named
here. They will not be included in the size calculation.
sysbuild: <True|False> (default False)
Build the project using sysbuild infrastructure. Only the main project's
generated devicetree and Kconfig will be used for filtering tests.
on device testing must use the hardware map, or west flash to load
the images onto the target. The ``--erase`` option of west flash is
not supported with this option. Usage of unsupported options will result
in tests requiring sysbuild support being skipped.
harness: <string>
A harness keyword in the ``testcase.yaml`` file identifies a Twister
harness needed to run a test successfully. A harness is a feature of
Twister and implemented by Twister, some harnesses are defined as
placeholders and have no implementation yet.
A harness can be seen as the handler that needs to be implemented in
Twister to be able to evaluate if a test passes criteria. For example, a
keyboard harness is set on tests that require keyboard interaction to reach
verdict on whether a test has passed or failed, however, Twister lack this
harness implementation at the moment.
Supported harnesses:
- ztest
- test
- console
- pytest
- gtest
- robot
Harnesses ``ztest``, ``gtest`` and ``console`` are based on parsing of the
output and matching certain phrases. ``ztest`` and ``gtest`` harnesses look
for pass/fail/etc. frames defined in those frameworks. Use ``gtest``
harness if you've already got tests written in the gTest framework and do
not wish to update them to zTest. The ``console`` harness tells Twister to
parse a test's text output for a regex defined in the test's YAML file.
The ``robot`` harness is used to execute Robot Framework test suites
in the Renode simulation framework.
Some widely used harnesses that are not supported yet:
- keyboard
- net
- bluetooth
Harness ``bsim`` is implemented in limited way - it helps only to copy the
final executable (``zephyr.exe``) from build directory to BabbleSim's
``bin`` directory (``${BSIM_OUT_PATH}/bin``). This action is useful to allow
BabbleSim's tests to directly run after. By default, the executable file
name is (with dots and slashes replaced by underscores):
``bs_<platform_name>_<test_path>_<test_scenario_name>``.
This name can be overridden with the ``bsim_exe_name`` option in
``harness_config`` section.
platform_key: <list of platform attributes>
Often a test needs to only be built and run once to qualify as passing.
Imagine a library of code that depends on the platform architecture where
passing the test on a single platform for each arch is enough to qualify the
tests and code as passing. The platform_key attribute enables doing just
that.
For example to key on (arch, simulation) to ensure a test is run once
per arch and simulation (as would be most common):
.. code-block:: yaml
platform_key:
- arch
- simulation
Adding platform (board) attributes to include things such as soc name,
soc family, and perhaps sets of IP blocks implementing each peripheral
interface would enable other interesting uses. For example, this could enable
building and running SPI tests once for each unique IP block.
harness_config: <harness configuration options>
Extra harness configuration options to be used to select a board and/or
for handling generic Console with regex matching. Config can announce
what features it supports. This option will enable the test to run on
only those platforms that fulfill this external dependency.
The following options are currently supported:
type: <one_line|multi_line> (required)
Depends on the regex string to be matched
regex: <list of regular expressions> (required)
Strings with regular expressions to match with the test's output
to confirm the test runs as expected.
ordered: <True|False> (default False)
Check the regular expression strings in orderly or randomly fashion
record: <recording options> (optional)
regex: <regular expression> (required)
The regular expression with named subgroups to match data fields
at the test's output lines where the test provides some custom data
for further analysis. These records will be written into the build
directory ``recording.csv`` file as well as ``recording`` property
of the test suite object in ``twister.json``.
For example, to extract three data fields ``metric``, ``cycles``,
``nanoseconds``:
.. code-block:: yaml
record:
regex: "(?P<metric>.*):(?P<cycles>.*) cycles, (?P<nanoseconds>.*) ns"
as_json: <list of regex subgroup names> (optional)
Data fields, extracted by the regular expression into named subgroups,
which will be additionally parsed as JSON encoded strings and written
into ``twister.json`` as nested ``recording`` object properties.
The corresponding ``recording.csv`` columns will contain strings as-is.
Using this option, a test log can convey layered data structures
passed from the test image for further analysis with summary results,
traces, statistics, etc.
For example, this configuration:
.. code-block:: yaml
record:
regex: "RECORD:(?P<type>.*):DATA:(?P<metrics>.*)"
as_json: [metrics]
when matched to a test log string:
.. code-block:: none
RECORD:jitter_drift:DATA:{"rollovers":0, "mean_us":1000.0}
will be reported in ``twister.json`` as:
.. code-block:: json
"recording":[
{
"type":"jitter_drift",
"metrics":{
"rollovers":0,
"mean_us":1000.0
}
}
]
fixture: <expression>
Specify a test scenario dependency on an external device(e.g., sensor),
and identify setups that fulfill this dependency. It depends on
specific test setup and board selection logic to pick the particular
board(s) out of multiple boards that fulfill the dependency in an
automation setup based on ``fixture`` keyword. Some sample fixture names
are i2c_hts221, i2c_bme280, i2c_FRAM, ble_fw and gpio_loop.
Only one fixture can be defined per test scenario and the fixture name has to
be unique across all tests in the test suite.
.. _pytest_root:
pytest_root: <list of pytest testpaths> (default pytest)
Specify a list of pytest directories, files or subtests that need to be
executed when a test scenario begins to run. The default pytest directory is
``pytest``. After the pytest run is finished, Twister will check if
the test scenario passed or failed according to the pytest report.
As an example, a list of valid pytest roots is presented below:
.. code-block:: yaml
harness_config:
pytest_root:
- "pytest/test_shell_help.py"
- "../shell/pytest/test_shell.py"
- "/tmp/test_shell.py"
- "~/tmp/test_shell.py"
- "$ZEPHYR_BASE/samples/subsys/testsuite/pytest/shell/pytest/test_shell.py"
- "pytest/test_shell_help.py::test_shell2_sample" # select pytest subtest
- "pytest/test_shell_help.py::test_shell2_sample[param_a]" # select pytest parametrized subtest
.. _pytest_args:
pytest_args: <list of arguments> (default empty)
Specify a list of additional arguments to pass to ``pytest`` e.g.:
``pytest_args: [‘-k=test_method’, ‘--log-level=DEBUG’]``. Note that
``--pytest-args`` can be passed multiple times to pass several arguments
to the pytest.
.. _pytest_dut_scope:
pytest_dut_scope: <function|class|module|package|session> (default function)
The scope for which ``dut`` and ``shell`` pytest fixtures are shared.
If the scope is set to ``function``, DUT is launched for every test case
in python script. For ``session`` scope, DUT is launched only once.
robot_testsuite: <robot file path> (default empty)
Specify one or more paths to a file containing a Robot Framework test suite to be run.
robot_option: <robot option> (default empty)
One or more options to be send to robotframework.
bsim_exe_name: <string>
If provided, the executable filename when copying to BabbleSim's bin
directory, will be ``bs_<platform_name>_<bsim_exe_name>`` instead of the
default based on the test path and scenario name.
The following is an example yaml file with a few harness_config options.
.. code-block:: yaml
sample:
name: HTS221 Temperature and Humidity Monitor
common:
tags: sensor
harness: console
harness_config:
type: multi_line
ordered: false
regex:
- "Temperature:(.*)C"
- "Relative Humidity:(.*)%"
fixture: i2c_hts221
tests:
test:
tags: sensors
depends_on: i2c
The following is an example yaml file with pytest harness_config options,
default pytest_root name "pytest" will be used if pytest_root not specified.
please refer the examples in samples/subsys/testsuite/pytest/.
.. code-block:: yaml
common:
harness: pytest
tests:
pytest.example.directories:
harness_config:
pytest_root:
- pytest_dir1
- $ENV_VAR/samples/test/pytest_dir2
pytest.example.files_and_subtests:
harness_config:
pytest_root:
- pytest/test_file_1.py
- test_file_2.py::test_A
- test_file_2.py::test_B[param_a]
The following is an example yaml file with robot harness_config options.
.. code-block:: yaml
tests:
robot.example:
harness: robot
harness_config:
robot_testsuite: [robot file path]
It can be more than one test suite using a list.
.. code-block:: yaml
tests:
robot.example:
harness: robot
harness_config:
robot_testsuite:
- [robot file path 1]
- [robot file path 2]
- [robot file path n]
One or more options can be passed to robotframework.
.. code-block:: yaml
tests:
robot.example:
harness: robot
harness_config:
robot_testsuite: [robot file path]
robot_option:
- --exclude tag
- --stop-on-error
filter: <expression>
Filter whether the test scenario should be run by evaluating an expression
against an environment containing the following values:
.. code-block:: none
{ ARCH : <architecture>,
PLATFORM : <platform>,
<all CONFIG_* key/value pairs in the test's generated defconfig>,
*<env>: any environment variable available
}
Twister will first evaluate the expression to find if a "limited" cmake call, i.e. using package_helper cmake script,
can be done. Existence of "dt_*" entries indicates devicetree is needed.
Existence of "CONFIG*" entries indicates kconfig is needed.
If there are no other types of entries in the expression a filtration can be done without creating a complete build system.
If there are entries of other types a full cmake is required.
The grammar for the expression language is as follows:
.. code-block:: antlr
expression : expression 'and' expression
| expression 'or' expression
| 'not' expression
| '(' expression ')'
| symbol '==' constant
| symbol '!=' constant
| symbol '<' NUMBER
| symbol '>' NUMBER
| symbol '>=' NUMBER
| symbol '<=' NUMBER
| symbol 'in' list
| symbol ':' STRING
| symbol
;
list : '[' list_contents ']';
list_contents : constant (',' constant)*;
constant : NUMBER | STRING;
For the case where ``expression ::= symbol``, it evaluates to ``true``
if the symbol is defined to a non-empty string.
Operator precedence, starting from lowest to highest:
* or (left associative)
* and (left associative)
* not (right associative)
* all comparison operators (non-associative)
``arch_allow``, ``arch_exclude``, ``platform_allow``, ``platform_exclude``
are all syntactic sugar for these expressions. For instance:
.. code-block:: none
arch_exclude = x86 arc
Is the same as:
.. code-block:: none
filter = not ARCH in ["x86", "arc"]
The ``:`` operator compiles the string argument as a regular expression,
and then returns a true value only if the symbol's value in the environment
matches. For example, if ``CONFIG_SOC="stm32f107xc"`` then
.. code-block:: none
filter = CONFIG_SOC : "stm.*"
Would match it.
required_snippets: <list of needed snippets>
:ref:`Snippets <snippets>` are supported in twister for test scenarios that
require them. As with normal applications, twister supports using the base
zephyr snippet directory and test application directory for finding
snippets. Listed snippets will filter supported tests for boards (snippets
must be compatible with a board for the test to run on them, they are not
optional).
The following is an example yaml file with 2 required snippets.
.. code-block:: yaml
tests:
snippet.example:
required_snippets:
- cdc-acm-console
- user-snippet-example
The set of test scenarios that actually run depends on directives in the test scenario
filed and options passed in on the command line. If there is any confusion,
running with ``-v`` or examining the discard report
(:file:`twister_discard.csv`) can help show why particular test scenarios were
skipped.
Metrics (such as pass/fail state and binary size) for the last code
release are stored in ``scripts/release/twister_last_release.csv``.
To update this, pass the ``--all --release`` options.
To load arguments from a file, add ``+`` before the file name, e.g.,
``+file_name``. File content must be one or more valid arguments separated by
line break instead of white spaces.
Most everyday users will run with no arguments.
Selecting platform scope
************************
One of the key features of Twister is its ability to decide on which platforms a given
test scenario should run. This behavior has its roots in Twister being developed as
a test runner for Zephyr's CI. With hundreds of available platforms and thousands of
tests, the testing tools should be able to adapt the scope and select/filter out what
is relevant and what is not.
Twister always prepares an initial list of platforms in scope for a given test,
based on command line arguments and the :ref:`test's configuration <test_config_args>`. Then,
platforms that don't fulfill the conditions required in the configuration yaml
(e.g. minimum ram) are filtered out from the scope.
Using ``--force-platform`` allows to override filtering caused by ``platform_allow``,
``platform_exclude``, ``arch_allow`` and ``arch_exclude`` keys in test configuration
files.
Command line arguments define the initial scope in the following way:
* ``-p/--platform <platform_name>`` (can be used multiple times): only platforms
passed with this argument;
* ``-l/--all``: all available platforms;
* ``-G/--integration``: all platforms from an ``integration_platforms`` list in
a given test configuration file. If a test has no ``integration_platforms``
*"scope presumption"* will happen;
* No scope argument: *"scope presumption"* will happen.
*"Scope presumption"*: A list of Twister's :ref:`default platforms <twister_default_testing_board>`
is used as the initial list. If nothing is left after the filtration, the ``platform_allow`` list
is used as the initial scope.
Managing tests timeouts
***********************
There are several parameters which control tests timeouts on various levels:
* ``timeout`` option in each test scenario. See :ref:`here <twister_test_case_timeout>` for more
details.
* ``timeout_multiplier`` option in board configuration. See
:ref:`here <twister_board_timeout_multiplier>` for more details.
* ``--timeout-multiplier`` twister option which can be used to adjust timeouts in exact twister run.
It can be useful in case of simulation platform as simulation time may depend on the host
speed & load or we may select different simulation method (i.e. cycle accurate but slower
one), etc...
Overall test scenario timeout is a multiplication of these three parameters.
Running in Integration Mode
***************************
This mode is used in continuous integration (CI) and other automated
environments used to give developers fast feedback on changes. The mode can
be activated using the ``--integration`` option of twister and narrows down
the scope of builds and tests if applicable to platforms defined under the
integration keyword in the test configuration file (``testcase.yaml`` and
``sample.yaml``).
Running tests on custom emulator
********************************
Apart from the already supported QEMU and other simulated environments, Twister
supports running any out-of-tree custom emulator defined in the board's :file:`board.cmake`.
To use this type of simulation, add the following properties to
:file:`custom_board/custom_board.yaml`:
.. code-block:: yaml
simulation: custom
simulation_exec: <name_of_emu_binary>
This tells Twister that the board is using a custom emulator called ``<name_of_emu_binary>``,
make sure this binary exists in the PATH.
Then, in :file:`custom_board/board.cmake`, set the supported emulation platforms to ``custom``:
.. code-block:: cmake
set(SUPPORTED_EMU_PLATFORMS custom)
Finally, implement the ``run_custom`` target in :file:`custom_board/board.cmake`.
It should look something like this:
.. code-block:: cmake
add_custom_target(run_custom
COMMAND
<name_of_emu_binary to invoke during 'run'>
<any args to be passed to the command, i.e. ${BOARD}, ${APPLICATION_BINARY_DIR}/zephyr/zephyr.elf>
WORKING_DIRECTORY ${APPLICATION_BINARY_DIR}
DEPENDS ${logical_target_for_zephyr_elf}
USES_TERMINAL
)
Running Tests on Hardware
*************************
Beside being able to run tests in QEMU and other simulated environments,
twister supports running most of the tests on real devices and produces
reports for each run with detailed FAIL/PASS results.
Executing tests on a single device
===================================
To use this feature on a single connected device, run twister with
the following new options:
.. tabs::
.. group-tab:: Linux
.. code-block:: bash
scripts/twister --device-testing --device-serial /dev/ttyACM0 \
--device-serial-baud 115200 -p frdm_k64f -T tests/kernel
.. group-tab:: Windows
.. code-block:: bat
python .\scripts\twister --device-testing --device-serial COM1 \
--device-serial-baud 115200 -p frdm_k64f -T tests/kernel
The ``--device-serial`` option denotes the serial device the board is connected to.
This needs to be accessible by the user running twister. You can run this on
only one board at a time, specified using the ``--platform`` option.
The ``--device-serial-baud`` option is only needed if your device does not run at
115200 baud.
To support devices without a physical serial port, use the ``--device-serial-pty``
option. In this cases, log messages are captured for example using a script.
In this case you can run twister with the following options:
.. tabs::
.. group-tab:: Linux
.. code-block:: bash
scripts/twister --device-testing --device-serial-pty "script.py" \
-p intel_adsp/cavs25 -T tests/kernel
.. group-tab:: Windows
.. note::
Not supported on Windows OS
The script is user-defined and handles delivering the messages which can be
used by twister to determine the test execution status.
The ``--device-flash-timeout`` option allows to set explicit timeout on the
device flash operation, for example when device flashing takes significantly
large time.
The ``--device-flash-with-test`` option indicates that on the platform
the flash operation also executes a test scenario, so the flash timeout is
increased by a test scenario timeout.
Executing tests on multiple devices
===================================
To build and execute tests on multiple devices connected to the host PC, a
hardware map needs to be created with all connected devices and their
details such as the serial device, baud and their IDs if available.
Run the following command to produce the hardware map:
.. tabs::
.. group-tab:: Linux
.. code-block:: bash
./scripts/twister --generate-hardware-map map.yml
.. group-tab:: Windows
.. code-block:: bat
python .\scripts\twister --generate-hardware-map map.yml
The generated hardware map file (map.yml) will have the list of connected
devices, for example:
.. tabs::
.. group-tab:: Linux
.. code-block:: yaml
- connected: true
id: OSHW000032254e4500128002ab98002784d1000097969900
platform: unknown
product: DAPLink CMSIS-DAP
runner: pyocd
serial: /dev/cu.usbmodem146114202
- connected: true
id: 000683759358
platform: unknown
product: J-Link
runner: unknown
serial: /dev/cu.usbmodem0006837593581
.. group-tab:: Windows
.. code-block:: yaml
- connected: true
id: OSHW000032254e4500128002ab98002784d1000097969900
platform: unknown
product: unknown
runner: unknown
serial: COM1
- connected: true
id: 000683759358
platform: unknown
product: unknown
runner: unknown
serial: COM2
Any options marked as ``unknown`` need to be changed and set with the correct
values, in the above example the platform names, the products and the runners need
to be replaced with the correct values corresponding to the connected hardware.
In this example we are using a reel_board and an nrf52840dk/nrf52840:
.. tabs::
.. group-tab:: Linux
.. code-block:: yaml
- connected: true
id: OSHW000032254e4500128002ab98002784d1000097969900
platform: reel_board
product: DAPLink CMSIS-DAP
runner: pyocd
serial: /dev/cu.usbmodem146114202
baud: 9600
- connected: true
id: 000683759358
platform: nrf52840dk/nrf52840
product: J-Link
runner: nrfjprog
serial: /dev/cu.usbmodem0006837593581
baud: 9600
.. group-tab:: Windows
.. code-block:: yaml
- connected: true
id: OSHW000032254e4500128002ab98002784d1000097969900
platform: reel_board
product: DAPLink CMSIS-DAP
runner: pyocd
serial: COM1
baud: 9600
- connected: true
id: 000683759358
platform: nrf52840dk/nrf52840
product: J-Link
runner: nrfjprog
serial: COM2
baud: 9600
The baud entry is only needed if not running at 115200.
If the map file already exists, then new entries are added and existing entries
will be updated. This way you can use one single master hardware map and update
it for every run to get the correct serial devices and status of the devices.
With the hardware map ready, you can run any tests by pointing to the map
.. tabs::
.. group-tab:: Linux
.. code-block:: bash
./scripts/twister --device-testing --hardware-map map.yml -T samples/hello_world/
.. group-tab:: Windows
.. code-block:: bat
python .\scripts\twister --device-testing --hardware-map map.yml -T samples\hello_world
The above command will result in twister building tests for the platforms
defined in the hardware map and subsequently flashing and running the tests
on those platforms.
.. note::
Currently only boards with support for pyocd, nrfjprog, jlink, openocd, or dediprog
are supported with the hardware map features. Boards that require other runners to flash the
Zephyr binary are still work in progress.
Hardware map allows to set ``--device-flash-timeout`` and ``--device-flash-with-test``
command line options as ``flash-timeout`` and ``flash-with-test`` fields respectively.
These hardware map values override command line options for the particular platform.
Serial PTY support using ``--device-serial-pty`` can also be used in the
hardware map:
.. code-block:: yaml
- connected: true
id: None
platform: intel_adsp/cavs25
product: None
runner: intel_adsp
serial_pty: path/to/script.py
runner_params:
- --remote-host=remote_host_ip_addr
- --key=/path/to/key.pem
The runner_params field indicates the parameters you want to pass to the
west runner. For some boards the west runner needs some extra parameters to
work. It is equivalent to following west and twister commands.
.. tabs::
.. group-tab:: Linux
.. code-block:: bash
west flash --remote-host remote_host_ip_addr --key /path/to/key.pem
twister -p intel_adsp/cavs25 --device-testing --device-serial-pty script.py
--west-flash="--remote-host=remote_host_ip_addr,--key=/path/to/key.pem"
.. group-tab:: Windows
.. note::
Not supported on Windows OS
.. note::
For serial PTY, the "--generate-hardware-map" option cannot scan it out
and generate a correct hardware map automatically. You have to edit it
manually according to above example. This is because the serial port
of the PTY is not fixed and being allocated in the system at runtime.
Fixtures
+++++++++
Some tests require additional setup or special wiring specific to the test.
Running the tests without this setup or test fixture may fail. A test scenario can
specify the fixture it needs which can then be matched with hardware capability
of a board and the fixtures it supports via the command line or using the hardware
map file.
Fixtures are defined in the hardware map file as a list:
.. code-block:: yaml
- connected: true
fixtures:
- gpio_loopback
id: 0240000026334e450015400f5e0e000b4eb1000097969900
platform: frdm_k64f
product: DAPLink CMSIS-DAP
runner: pyocd
serial: /dev/ttyACM9
When running ``twister`` with ``--device-testing``, the configured fixture
in the hardware map file will be matched to test scenarios requesting the same fixtures
and these tests will be executed on the boards that provide this fixture.
.. figure:: figures/fixtures.svg
:figclass: align-center
Fixtures can also be provided via twister command option ``--fixture``, this option
can be used multiple times and all given fixtures will be appended as a list. And the
given fixtures will be assigned to all boards, this means that all boards set by
current twister command can run those test scenarios which request the same fixtures.
Some fixtures allow for configuration strings to be appended, separated from the
fixture name by a ``:``. Only the fixture name is matched against the fixtures
requested by test scenarios.
Notes
+++++
It may be useful to annotate board descriptions in the hardware map file
with additional information. Use the ``notes`` keyword to do this. For
example:
.. code-block:: yaml
- connected: false
fixtures:
- gpio_loopback
id: 000683290670
notes: An nrf5340dk/nrf5340 is detected as an nrf52840dk/nrf52840 with no serial
port, and three serial ports with an unknown platform. The board id of the serial
ports is not the same as the board id of the development kit. If you regenerate
this file you will need to update serial to reference the third port, and platform
to nrf5340dk/nrf5340/cpuapp or another supported board target.
platform: nrf52840dk/nrf52840
product: J-Link
runner: jlink
serial: null
Overriding Board Identifier
+++++++++++++++++++++++++++
When (re-)generated the hardware map file will contain an ``id`` keyword
that serves as the argument to ``--board-id`` when flashing. In some
cases the detected ID is not the correct one to use, for example when
using an external J-Link probe. The ``probe_id`` keyword overrides the
``id`` keyword for this purpose. For example:
.. code-block:: yaml
- connected: false
id: 0229000005d9ebc600000000000000000000000097969905
platform: mimxrt1060_evk
probe_id: 000609301751
product: DAPLink CMSIS-DAP
runner: jlink
serial: null
Quarantine
++++++++++
Twister allows user to provide configuration files defining a list of tests or
platforms to be put under quarantine. Such tests will be skipped and marked
accordingly in the output reports. This feature is especially useful when
running larger test suits, where a failure of one test can affect the execution
of other tests (e.g. putting the physical board in a corrupted state).
To use the quarantine feature one has to add the argument
``--quarantine-list <PATH_TO_QUARANTINE_YAML>`` to a twister call.
Multiple quarantine files can be used.
The current status of tests on the quarantine list can also be verified by adding
``--quarantine-verify`` to the above argument. This will make twister skip all tests
which are not on the given list.
A quarantine yaml has to be a sequence of dictionaries. Each dictionary has to have
``scenarios`` and ``platforms`` entries listing combinations of scenarios and platforms
to put under quarantine. In addition, an optional entry ``comment`` can be used, where
some more details can be given (e.g. link to a reported issue). These comments will also
be added to the output reports.
When quarantining a class of tests or many scenarios in a single testsuite or
when dealing with multiple issues within a subsystem, it is possible to use
regular expressions, for example, **kernel.*** would quarantine
all kernel tests.
An example of entries in a quarantine yaml:
.. code-block:: yaml
- scenarios:
- sample.basic.helloworld
comment: "Link to the issue: https://github.com/zephyrproject-rtos/zephyr/pull/33287"
- scenarios:
- kernel.common
- kernel.common.(misra|tls)
- kernel.common.nano64
platforms:
- .*_cortex_.*
- native_sim
To exclude a platform, use the following syntax:
.. code-block:: yaml
- platforms:
- qemu_x86
comment: "broken qemu"
Additionally you can quarantine entire architectures or a specific simulator for executing tests.
Test Configuration
******************
A test configuration can be used to customize various aspects of twister
and the default enabled options and features. This allows tweaking the filtering
capabilities depending on the environment and makes it possible to adapt and
improve coverage when targeting different sets of platforms.
The test configuration also adds support for test levels and the ability to
assign a specific test to one or more levels. Using command line options of
twister it is then possible to select a level and just execute the tests
included in this level.
Additionally, the test configuration allows defining level
dependencies and additional inclusion of tests into a specific level if
the test itself does not have this information already.
In the configuration file you can include complete components using
regular expressions and you can specify which test level to import from
the same file, making management of levels easier.
To help with testing outside of upstream CI infrastructure, additional
options are available in the configuration file, which can be hosted
locally. As of now, those options are available:
- Ability to ignore default platforms as defined in board definitions
(Those are mostly emulation platforms used to run tests in upstream
CI)
- Option to specify your own list of default platforms overriding what
upstream defines.
- Ability to override ``build_on_all`` options used in some test scenarios.
This will treat tests or sample as any other just build for default
platforms you specify in the configuration file or on the command line.
- Ignore some logic in twister to expand platform coverage in cases where
default platforms are not in scope.
Platform Configuration
======================
The following options control platform filtering in twister:
- ``override_default_platforms``: override default key a platform sets in board
configuration and instead use the list of platforms provided in the
configuration file as the list of default platforms. This option is set to
False by default.
- ``increased_platform_scope``: This option is set to True by default, when
disabled, twister will not increase platform coverage automatically and will
only build and run tests on the specified platforms.
- ``default_platforms``: A list of additional default platforms to add. This list
can either be used to replace the existing default platforms or can extend it
depending on the value of ``override_default_platforms``.
And example platforms configuration:
.. code-block:: yaml
platforms:
override_default_platforms: true
increased_platform_scope: false
default_platforms:
- qemu_x86
Test Level Configuration
========================
The test configuration allows defining test levels, level dependencies and
additional inclusion of tests into a specific test level if the test itself
does not have this information already.
In the configuration file you can include complete components using
regular expressions and you can specify which test level to import from
the same file, making management of levels simple.
And example test level configuration:
.. code-block:: yaml
levels:
- name: my-test-level
description: >
my custom test level
adds:
- kernel.threads.*
- kernel.timer.behavior
- arch.interrupt
- boards.*
Combined configuration
======================
To mix the Platform and level configuration, you can take an example as below:
An example platforms plus level configuration:
.. code-block:: yaml
platforms:
override_default_platforms: true
default_platforms:
- frdm_k64f
levels:
- name: smoke
description: >
A plan to be used verifying basic zephyr features.
- name: unit
description: >
A plan to be used verifying unit test.
- name: integration
description: >
A plan to be used verifying integration.
- name: acceptance
description: >
A plan to be used verifying acceptance.
- name: system
description: >
A plan to be used verifying system.
- name: regression
description: >
A plan to be used verifying regression.
To run with above test_config.yaml file, only default_platforms with given test level
test scenarios will run.
.. tabs::
.. group-tab:: Linux
.. code-block:: bash
scripts/twister --test-config=<path to>/test_config.yaml
-T tests --level="smoke"
Running in Tests in Random Order
********************************
Enable ZTEST framework's :kconfig:option:`CONFIG_ZTEST_SHUFFLE` config option to
run your tests in random order. This can be beneficial for identifying
dependencies between test cases. For native_sim platforms, you can provide
the seed to the random number generator by providing ``-seed=value`` as an
argument to twister. See :ref:`Shuffling Test Sequence <ztest_shuffle>` for more
details.
Robot Framework Tests
*********************
Zephyr supports `Robot Framework <https://robotframework.org/>`_ as one of solutions for automated testing.
Robot files allow you to express interactive test scenarios in human-readable text format and execute them in simulation or against hardware.
At this moment Zephyr integration supports running Robot tests in the `Renode <https://renode.io/>`_ simulation framework.
To execute a Robot test suite with twister, run the following command:
.. tabs::
.. group-tab:: Linux
.. code-block:: bash
$ ./scripts/twister --platform hifive1 --test samples/subsys/shell/shell_module/sample.shell.shell_module.robot
.. group-tab:: Windows
.. code-block:: bat
python .\scripts\twister --platform hifive1 --test samples/subsys/shell/shell_module/sample.shell.shell_module.robot
Writing Robot tests
===================
For the list of keywords provided by the Robot Framework itself, refer to `the official Robot documentation <https://robotframework.org/robotframework/>`_.
Information on writing and running Robot Framework tests in Renode can be found in `the testing section <https://renode.readthedocs.io/en/latest/introduction/testing.html>`_ of Renode documentation.
It provides a list of the most commonly used keywords together with links to the source code where those are defined.
It's possible to extend the framework by adding new keywords expressed directly in Robot test suite files, as an external Python library or, like Renode does it, dynamically via XML-RPC.
For details see the `extending Robot Framework <https://robotframework.org/robotframework/latest/RobotFrameworkUserGuide.html#extending-robot-framework>`_ section in the official Robot documentation.
Running a single testsuite
==========================
To run a single testsuite instead of a whole group of test you can run:
.. code-block:: bash
$ twister -p qemu_riscv32 -s tests/kernel/interrupt/arch.shared_interrupt
Reference in New Issue View Git Blame Copy Permalink