43 lines
1.4 KiB
INI
43 lines
1.4 KiB
INI
#
|
|
# NXP LPCXpresso11U68 (evaluation board OM13058)
|
|
#
|
|
# http://www.nxp.com/board/OM13058.html
|
|
# https://www.embeddedartists.com/products/lpc11u68-lpcxpresso/
|
|
# https://os.mbed.com/platforms/LPCXpresso11U68/
|
|
#
|
|
|
|
# The on-board LPC-Link2 debug probe (based on a NXP LPC43xx MCU) provides
|
|
# either a CMSIS-DAP or a J-Link interface. It depends on the version of the
|
|
# embedded firmware. Uncomment the line corresponding to yours.
|
|
source [find interface/cmsis-dap.cfg]
|
|
# source [find interface/jlink.cfg]
|
|
|
|
# NXP LPC11U68 Cortex-M0 with 256kB flash and 32kB + 4kB SRAM.
|
|
set WORKAREASIZE 0x5000
|
|
|
|
source [find target/lpc11xx.cfg]
|
|
|
|
# This ensures that the interrupt vectors (0x0000-0x0200) are re-mapped to
|
|
# flash after the "reset halt" command. Else the load/verify functions won't
|
|
# work correctly.
|
|
#
|
|
# Table 8. System memory remap register (SYSMEMREMAP, address 0x40048000) bit
|
|
# description
|
|
# Bit Symbol Value Description
|
|
# 1:0 MAP System memory remap
|
|
# 0x0 Boot Loader Mode. Interrupt vectors are re-mapped to
|
|
# Boot ROM.
|
|
# 0x1 User RAM Mode. Interrupt vectors are re-mapped to
|
|
# Static RAM.
|
|
# 0x2 User Flash Mode. Interrupt vectors are not re-mapped
|
|
# and reside in Flash.
|
|
# 31:2 - - Reserved.
|
|
$_TARGETNAME configure -event reset-end {
|
|
mww 0x40048000 0x02
|
|
}
|
|
|
|
# Enable Zephyr thread awareness.
|
|
$_TARGETNAME configure -rtos Zephyr
|
|
|
|
adapter speed 100
|