46 lines
1.6 KiB
ReStructuredText
46 lines
1.6 KiB
ReStructuredText
:orphan:
|
|
|
|
.. rt1xxx-lpclink2-probes
|
|
|
|
A debug probe is used for both flashing and debugging the board. This board has
|
|
an :ref:`lpc-link2-onboard-debug-probe`. The default firmware present on this
|
|
probe is the :ref:`lpclink2-daplink-onboard-debug-probe`.
|
|
|
|
Based on the host tool installed, please use the following instructions
|
|
to setup your debug probe:
|
|
|
|
* :ref:`jlink-debug-host-tools`:
|
|
`Using J-Link with LPC-Link2 Probe`_
|
|
* :ref:`linkserver-debug-host-tools`:
|
|
`Using CMSIS-DAP with LPC-Link2 Probe`_
|
|
* :ref:`pyocd-debug-host-tools`:
|
|
`Using CMSIS-DAP with LPC-Link2 Probe`_
|
|
|
|
Using CMSIS-DAP with LPC-Link2 Probe
|
|
------------------------------------
|
|
|
|
1. Follow the instructions provided at
|
|
:ref:`lpclink2-cmsis-onboard-debug-probe` to reprogram the default debug
|
|
probe firmware on this board.
|
|
#. Ensure the SWD isolation jumpers are populated
|
|
|
|
Using J-Link with LPC-Link2 Probe
|
|
---------------------------------
|
|
|
|
There are two options: the onboard debug circuit can be updated with Segger
|
|
J-Link firmware, or a :ref:`jlink-external-debug-probe` can be attached to the
|
|
EVK.
|
|
|
|
To update the onboard debug circuit, please do the following:
|
|
|
|
1. Switch the power source for the EVK to a different source than the
|
|
debug USB, as the J-Link firmware does not power the EVK via the
|
|
debug USB.
|
|
#. Follow the instructions provided at
|
|
:ref:`lpclink2-jlink-onboard-debug-probe` to reprogram the default debug
|
|
probe firmware on this board.
|
|
#. Ensure the SWD isolation jumpers are populated.
|
|
|
|
To attach an external J-Link probe, ensure the SWD isolation jumpers are
|
|
removed, then connect the probe to the external JTAG/SWD header
|