…
|
||
---|---|---|
.. | ||
boards | ||
src | ||
CMakeLists.txt | ||
README.rst | ||
prj.conf | ||
sample.yaml |
README.rst
.. zephyr:code-sample:: mcux_lpcmp :name: NXP MCUX Low-power Analog Comparator (LPCMP) :relevant-api: sensor_interface Get analog comparator data from an NXP MCUX Low-power Analog Comparator (LPCMP). Overview ******** This sample show how to use the NXP MCUX Low-power Analog Comparator (LPCMP) driver. In this application, the negative input port of the LPCMP is set to 7 which means the input voltage comes from the LPCMP internal DAC, the reference voltage of the DAC is set to 0 (for the specific chip, the user needs to check the reference manual to confirm where this reference voltage comes from), the output voltage of the DAC is equal to (VREF/256)*(data+1), where data is set through the attribute ``SENSOR_ATTR_MCUX_LPCMP_DAC_OUTPUT_VOLTAGE``. The positive input port is set to 0, the user needs to check the reference manual and board schematic to confirm which specific port is used and can connect an external voltage to that port and change the input voltage to see the output change of the LPCMP. The output value of the LPCMP is reported on the console. Building and Running ******************** Building and Running for NXP FRDM-MCXN947 ========================================= Build the application for the :zephyr:board:`frdm_mcxn947` board, and adjust the LPCMP positive input port voltage by changing the voltage input to J2-17. .. zephyr-app-commands:: :zephyr-app: samples/sensor/mcux_lpcmp :board: frdm_mcxn947//cpu0 :goals: build flash :compact: Building and Running for NXP FRDM-MCXN236 ========================================= Build the application for the :zephyr:board:`frdm_mcxn236` board, and adjust the LPCMP positive input port voltage by changing the voltage input to J2-8. .. zephyr-app-commands:: :zephyr-app: samples/sensor/mcux_lpcmp :board: frdm_mcxn236 :goals: build flash :compact: