168 lines
5.4 KiB
ReStructuredText
168 lines
5.4 KiB
ReStructuredText
.. _adafruit_feather_m0_basic_proto:
|
|
|
|
Adafruit Feather M0 Basic Proto
|
|
###############################
|
|
|
|
Overview
|
|
********
|
|
|
|
The Adafruit Feather M0 Basic Proto is a thin, light ARM development
|
|
board with an onboard battery connector and charger for 3.7 V lithium
|
|
polymer batteries, charging status indicator and user LEDs, native USB
|
|
connector, 20 I/O pins, and a small prototyping area.
|
|
|
|
.. image:: img/adafruit_feather_m0_basic_proto.jpg
|
|
:align: center
|
|
:alt: Adafruit Feather M0 Basic Proto
|
|
|
|
Hardware
|
|
********
|
|
|
|
- ATSAMD21G18A ARM Cortex-M0+ processor at 48 MHz
|
|
- 32.768 kHz crystal oscillator
|
|
- 256 KiB flash memory and 32 KiB of RAM
|
|
- Battery connector and charger for 3.7 V lithium polymer batteries
|
|
- Charging indicator LED
|
|
- User LED
|
|
- Reset button
|
|
- Native USB port
|
|
|
|
Supported Features
|
|
==================
|
|
|
|
The adafruit_feather_m0_basic_proto board configuration supports the
|
|
following hardware features:
|
|
|
|
+-----------+------------+------------------------------------------+
|
|
| Interface | Controller | Driver/Component |
|
|
+===========+============+==========================================+
|
|
| NVIC | on-chip | Nested vector interrupt controller |
|
|
+-----------+------------+------------------------------------------+
|
|
| Flash | on-chip | Can be used with LittleFS to store files |
|
|
+-----------+------------+------------------------------------------+
|
|
| SYSTICK | on-chip | Systick |
|
|
+-----------+------------+------------------------------------------+
|
|
| WDT | on-chip | Watchdog |
|
|
+-----------+------------+------------------------------------------+
|
|
| GPIO | on-chip | I/O ports |
|
|
+-----------+------------+------------------------------------------+
|
|
| USART | on-chip | Serial port |
|
|
+-----------+------------+------------------------------------------+
|
|
| I2C | on-chip | Inter-Integrated Circuit |
|
|
+-----------+------------+------------------------------------------+
|
|
| SPI | on-chip | Serial Peripheral Interface port |
|
|
+-----------+------------+------------------------------------------+
|
|
| USB | on-chip | USB device |
|
|
+-----------+------------+------------------------------------------+
|
|
|
|
Other hardware features are not currently supported by Zephyr.
|
|
|
|
The default configuration can be found in the Kconfig file
|
|
:zephyr_file:`boards/adafruit/feather_m0_basic_proto/adafruit_feather_m0_basic_proto_defconfig`.
|
|
|
|
Connections and IOs
|
|
===================
|
|
|
|
The `Adafruit Feather M0 Basic Proto Learn site`_ has detailed
|
|
information about the board including `pinouts`_ and the `schematic`_.
|
|
|
|
System Clock
|
|
============
|
|
|
|
The SAMD21 MCU is configured to use the 32.768 kHz external oscillator
|
|
with the on-chip PLL generating the 48 MHz system clock.
|
|
|
|
Serial Port
|
|
===========
|
|
|
|
The SAMD21 MCU has 6 SERCOM based USARTs. On the Adafruit Feather M0
|
|
Basic Proto, SERCOM0 is the Zephyr console and is available on pins 0
|
|
(RX) and 1 (TX).
|
|
|
|
I2C Port
|
|
========
|
|
|
|
The SAMD21 MCU has 6 SERCOM based USARTs. On the Adafruit Feather M0
|
|
Basic Proto, SERCOM3 is available on pin 20 (SDA) and pin 21 (SCL).
|
|
|
|
SPI Port
|
|
========
|
|
|
|
The SAMD21 MCU has 6 SERCOM based SPIs. On the Adafruit Feather M0
|
|
Basic Proto, SERCOM4 is available on pin 22 (MISO), pin 23 (MOSI), and
|
|
pin 24 (SCK).
|
|
|
|
USB Device Port
|
|
===============
|
|
|
|
The SAMD21 MCU has a USB device port that can be used to communicate
|
|
with a host PC. See the :ref:`usb-samples` sample applications for
|
|
more, such as the :zephyr:code-sample:`usb-cdc-acm` sample which sets up a virtual
|
|
serial port that echos characters back to the host PC.
|
|
|
|
Programming and Debugging
|
|
*************************
|
|
|
|
The Adafruit Feather M0 Basic Proto ships with a BOSSA compatible
|
|
SAM-BA bootloader. The bootloader can be entered by quickly tapping
|
|
the reset button twice.
|
|
|
|
Flashing
|
|
========
|
|
|
|
#. Build the Zephyr kernel and the :ref:`hello_world` sample application:
|
|
|
|
.. zephyr-app-commands::
|
|
:zephyr-app: samples/hello_world
|
|
:board: adafruit_feather_m0_basic_proto
|
|
:goals: build
|
|
:compact:
|
|
|
|
#. Connect the Adafruit Feather M0 Basic Proto to your host computer
|
|
using USB
|
|
|
|
#. Connect a 3.3 V USB to serial adapter to the board and to the
|
|
host. See the `Serial Port`_ section above for the board's pin
|
|
connections.
|
|
|
|
#. Run your favorite terminal program to listen for output. Under Linux the
|
|
terminal should be :code:`/dev/ttyACM0`. For example:
|
|
|
|
.. code-block:: console
|
|
|
|
$ minicom -D /dev/ttyACM0 -o
|
|
|
|
The -o option tells minicom not to send the modem initialization
|
|
string. Connection should be configured as follows:
|
|
|
|
- Speed: 115200
|
|
- Data: 8 bits
|
|
- Parity: None
|
|
- Stop bits: 1
|
|
|
|
#. Tap the reset button twice quickly to enter bootloader mode
|
|
|
|
#. Flash the image:
|
|
|
|
.. zephyr-app-commands::
|
|
:zephyr-app: samples/hello_world
|
|
:board: adafruit_feather_m0_basic_proto
|
|
:goals: flash
|
|
:compact:
|
|
|
|
You should see "Hello World! adafruit_feather_m0_basic_proto" in your terminal.
|
|
|
|
References
|
|
**********
|
|
|
|
.. target-notes::
|
|
|
|
.. _Adafruit Feather M0 Basic Proto Learn site:
|
|
https://learn.adafruit.com/adafruit-feather-m0-basic-proto/
|
|
|
|
.. _pinouts:
|
|
https://learn.adafruit.com/adafruit-feather-m0-basic-proto/pinouts
|
|
|
|
.. _schematic:
|
|
https://learn.adafruit.com/adafruit-feather-m0-basic-proto/downloads
|