zephyr

History

Kumar Gala 5d36157c7c sensors: Remove unnecessary Kconfig setting of sensors Sensor Kconfig sybmols should be enabled if CONFIG_SENSOR=y and the devicetree node for the sensor is enabled. We can remove explicitly enabling specific sensor drivers in .conf files. Signed-off-by: Kumar Gala <galak@kernel.org>		2022-07-25 15:18:56 +02:00
..
src	…
CMakeLists.txt	…
README.rst	…
prj.conf	sensors: Remove unnecessary Kconfig setting of sensors	2022-07-25 15:18:56 +02:00
sample.yaml	…

README.rst

.. _hts221:

HTS221: Temperature and Humidity Monitor
########################################

Overview
********
This sample periodically reads temperature and humidity from the HTS221
Temperature & Humidity Sensor and displays it on the console


Requirements
************

This sample uses the HTS221 sensor controlled using the I2C interface.

References
**********

 - HTS211: http://www.st.com/en/mems-and-sensors/hts221.html

Building and Running
********************

 This project outputs sensor data to the console. It requires an HTS221
 sensor, which is present on the disco_l475_iot1 board.

.. zephyr-app-commands::
   :zephyr-app: samples/sensor/hts221
   :board: disco_l475_iot1
   :goals: build
   :compact:

Sample Output
=============

 .. code-block:: console

    Temperature:25.3 C
    Relative Humidity:40%
    Temperature:25.3 C
    Relative Humidity:40%
    Temperature:25.3 C
    Relative Humidity:40%
    Temperature:25.3 C
    Relative Humidity:40%

    <repeats endlessly every 2 seconds>