zephyr

History

Kumar Gala 0e1a7e0241 drivers: led: Remove unnecessary Kconfig settings Having the LED device enabled in devicetree will now get the driver enabled by default when CONFIG_LED=y is set. So we can remove setting driver enabling Kconfig values in various .conf files. Signed-off-by: Kumar Gala <galak@kernel.org>		2022-08-11 17:46:43 +02:00
..
boards	samples: Remove label property from devicetree overlays	2022-08-01 17:59:32 +02:00
src	samples: drivers: ht16k33: Update sample to remove use of DT_INST	2022-07-21 05:31:57 -05:00
CMakeLists.txt	…
README.rst	…
prj.conf	drivers: led: Remove unnecessary Kconfig settings	2022-08-11 17:46:43 +02:00
sample.yaml	…

README.rst

.. _ht16k33:

HT16K33 LED driver with keyscan
###############################

Overview
********

This sample controls the LEDs connected to a `Holtek HT16K33`_
driver. The sample supports up to 128 LEDs connected to the
rows/columns of the HT16K33.

The LEDs are controlled using the following pattern:

 1. turn on all connected (up to 128) LEDs one-by-one
 2. blink the LEDs at 2 Hz, 1 Hz, and 0.5 Hz
 3. reduce the brightness gradually from 100% to 0%
 4. turn off all LEDs, restore 100% brightness, and start over

The sample logs keyscan events on the console.

Building and Running
********************

Build the application for the :ref:`nrf52840dk_nrf52840` board, and
connect a HT16K33 LED driver at address 0x70 on the I2C-0 bus.

.. zephyr-app-commands::
   :zephyr-app: samples/drivers/ht16k33
   :board: nrf52840dk_nrf52840
   :goals: build
   :compact:

For flashing the application, refer to the Flashing section of the
:ref:`nrf52840dk_nrf52840` board documentation.

References
**********

.. target-notes::

.. _Holtek HT16K33: http://www.holtek.com/productdetail/-/vg/HT16K33