223 lines
5.2 KiB
Plaintext
223 lines
5.2 KiB
Plaintext
menuconfig UART_NS16550
|
|
bool "NS16550 serial driver"
|
|
select SERIAL_HAS_DRIVER
|
|
select SERIAL_SUPPORT_INTERRUPT
|
|
help
|
|
This option enables the NS16550 serial driver.
|
|
This driver can be used for the serial hardware
|
|
available on x86 boards.
|
|
|
|
config UART_NS16550_PCI
|
|
bool "Enable PCI Support"
|
|
depends on PCI && UART_NS16550
|
|
help
|
|
This enables NS16550 to probe for PCI-based serial devices.
|
|
|
|
This option enables the driver to auto-detect the device
|
|
configuration required to access those ports.
|
|
|
|
config UART_NS16550_DLF
|
|
bool "Enable Divisor Latch Fraction (DLF) support"
|
|
depends on UART_NS16550
|
|
help
|
|
This enables support for divisor latch fraction (DLF).
|
|
It is used to limit frequency error.
|
|
|
|
Says n if you are not sure if hardware supports this.
|
|
|
|
config UART_NS16550_LINE_CTRL
|
|
bool "Enable Serial Line Control for Apps"
|
|
depends on UART_LINE_CTRL && UART_NS16550
|
|
help
|
|
This enables the API for apps to control the serial line,
|
|
such as CTS and RTS.
|
|
|
|
Says n if not sure.
|
|
|
|
config UART_NS16550_DRV_CMD
|
|
bool "Enable Driver Commands"
|
|
depends on UART_DRV_CMD && UART_NS16550
|
|
help
|
|
This enables the API for apps to send commands to driver.
|
|
|
|
Says n if not sure.
|
|
|
|
config UART_NS16750
|
|
bool "Enable 64-bytes FIFO for UART 16750"
|
|
depends on UART_NS16550
|
|
help
|
|
This enables support for 64-bytes FIFO if UART controller is 16750.
|
|
|
|
# ---------- Port 0 ----------
|
|
|
|
menuconfig UART_NS16550_PORT_0
|
|
bool "Enable NS16550 Port 0"
|
|
depends on UART_NS16550
|
|
help
|
|
This tells the driver to configure the UART port at boot, depending on
|
|
the additional configure options below.
|
|
|
|
if !HAS_DTS
|
|
config UART_NS16550_PORT_0_NAME
|
|
string "Port 0 Device Name"
|
|
default "UART_0"
|
|
depends on UART_NS16550_PORT_0
|
|
help
|
|
This is the device name for UART, and is included in the device
|
|
struct.
|
|
|
|
if !HAS_DTS && !ARC
|
|
config UART_NS16550_PORT_0_IRQ_PRI
|
|
int "Port 0 Interrupt Priority"
|
|
default 0
|
|
depends on UART_NS16550_PORT_0
|
|
help
|
|
The interrupt priority for UART port.
|
|
endif
|
|
|
|
config UART_NS16550_PORT_0_BAUD_RATE
|
|
int "Port 0 Baud Rate"
|
|
default 0
|
|
depends on UART_NS16550_PORT_0
|
|
help
|
|
The baud rate for UART port to be set to at boot.
|
|
|
|
Leave at 0 to skip initialization.
|
|
endif
|
|
|
|
config UART_NS16550_PORT_0_OPTIONS
|
|
int "Port 0 Options"
|
|
default 0
|
|
depends on UART_NS16550_PORT_0
|
|
help
|
|
Options used for port initialization.
|
|
|
|
config UART_NS16550_PORT_0_DLF
|
|
hex "Port 0 DLF value"
|
|
default 0x0
|
|
depends on UART_NS16550_PORT_0 && UART_NS16550_DLF
|
|
help
|
|
Value for DLF register.
|
|
|
|
config UART_NS16550_PORT_0_PCI
|
|
bool "Port 0 is PCI-based"
|
|
depends on UART_NS16550_PCI && UART_NS16550_PORT_0
|
|
help
|
|
Obtain port information from PCI.
|
|
|
|
# ---------- Port 1 ----------
|
|
|
|
menuconfig UART_NS16550_PORT_1
|
|
bool "Enable NS16550 Port 1"
|
|
depends on UART_NS16550
|
|
help
|
|
This tells the driver to configure the UART port at boot, depending on
|
|
the additional configure options below.
|
|
|
|
if !HAS_DTS
|
|
config UART_NS16550_PORT_1_NAME
|
|
string "Port 1 Device Name"
|
|
default "UART_1"
|
|
depends on UART_NS16550_PORT_1
|
|
help
|
|
This is the device name for UART, and is included in the device
|
|
struct.
|
|
|
|
if !HAS_DTS && !ARC
|
|
config UART_NS16550_PORT_1_IRQ_PRI
|
|
int "Port 1 Interrupt Priority"
|
|
default 0
|
|
depends on UART_NS16550_PORT_1
|
|
help
|
|
The interrupt priority for UART port.
|
|
endif
|
|
|
|
config UART_NS16550_PORT_1_BAUD_RATE
|
|
int "Port 1 Baud Rate"
|
|
default 0
|
|
depends on UART_NS16550_PORT_1
|
|
help
|
|
The baud rate for UART port to be set to at boot.
|
|
|
|
Leave at 0 to skip initialization.
|
|
endif
|
|
|
|
config UART_NS16550_PORT_1_OPTIONS
|
|
int "Port 1 Options"
|
|
default 0
|
|
depends on UART_NS16550_PORT_1
|
|
help
|
|
Options used for port initialization.
|
|
|
|
config UART_NS16550_PORT_1_DLF
|
|
hex "Port 1 DLF value"
|
|
default 0x0
|
|
depends on UART_NS16550_PORT_1 && UART_NS16550_DLF
|
|
help
|
|
Value for DLF register.
|
|
|
|
config UART_NS16550_PORT_1_PCI
|
|
bool "Port 1 is PCI-based"
|
|
depends on UART_NS16550_PCI && UART_NS16550_PORT_1
|
|
help
|
|
Obtain port information from PCI.
|
|
|
|
# ---------- Port 2 ----------
|
|
|
|
menuconfig UART_NS16550_PORT_2
|
|
bool "Enable NS16550 Port 2"
|
|
depends on UART_NS16550
|
|
help
|
|
This tells the driver to configure the UART port at boot, depending on
|
|
the additional configure options below.
|
|
|
|
|
|
config UART_NS16550_PORT_2_OPTIONS
|
|
int "Port 2 Options"
|
|
default 0
|
|
depends on UART_NS16550_PORT_2
|
|
help
|
|
Options used for port initialization.
|
|
|
|
config UART_NS16550_PORT_2_DLF
|
|
hex "Port 2 DLF value"
|
|
default 0x0
|
|
depends on UART_NS16550_PORT_2 && UART_NS16550_DLF
|
|
help
|
|
Value for DLF register.
|
|
|
|
config UART_NS16550_PORT_2_PCI
|
|
bool "Port 2 is PCI-based"
|
|
depends on UART_NS16550_PCI && UART_NS16550_PORT_2
|
|
help
|
|
Obtain port information from PCI.
|
|
|
|
# ---------- Port 3 ----------
|
|
|
|
menuconfig UART_NS16550_PORT_3
|
|
bool "Enable NS16550 Port 3"
|
|
depends on UART_NS16550
|
|
help
|
|
This tells the driver to configure the UART port at boot, depending on
|
|
the additional configure options below.
|
|
|
|
config UART_NS16550_PORT_3_OPTIONS
|
|
int "Port 3 Options"
|
|
default 0
|
|
depends on UART_NS16550_PORT_3
|
|
help
|
|
Options used for port initialization.
|
|
|
|
config UART_NS16550_PORT_3_DLF
|
|
hex "Port 3 DLF value"
|
|
default 0x0
|
|
depends on UART_NS16550_PORT_3 && UART_NS16550_DLF
|
|
help
|
|
Value for DLF register.
|
|
|
|
config UART_NS16550_PORT_3_PCI
|
|
bool "Port 3 is PCI-based"
|
|
depends on UART_NS16550_PCI && UART_NS16550_PORT_3
|
|
help
|
|
Obtain port information from PCI.
|