zephyr/drivers/sensor/ism330dhcx/ism330dhcx.h

215 lines
6.0 KiB
C

/* ST Microelectronics ISM330DHCX 6-axis IMU sensor driver
*
* Copyright (c) 2020 STMicroelectronics
*
* SPDX-License-Identifier: Apache-2.0
*
* Datasheet:
* https://www.st.com/resource/en/datasheet/ism330dhcx.pdf
*/
#ifndef ZEPHYR_DRIVERS_SENSOR_ISM330DHCX_ISM330DHCX_H_
#define ZEPHYR_DRIVERS_SENSOR_ISM330DHCX_ISM330DHCX_H_
#include <drivers/sensor.h>
#include <zephyr/types.h>
#include <drivers/gpio.h>
#include <drivers/spi.h>
#include <sys/util.h>
#include "ism330dhcx_reg.h"
union axis3bit16_t {
s16_t i16bit[3];
u8_t u8bit[6];
};
union axis1bit16_t {
s16_t i16bit;
u8_t u8bit[2];
};
#define ISM330DHCX_EN_BIT 0x01
#define ISM330DHCX_DIS_BIT 0x00
/* Accel sensor sensitivity grain is 61 ug/LSB */
#define GAIN_UNIT_XL (61LL)
/* Gyro sensor sensitivity grain is 4.375 udps/LSB */
#define GAIN_UNIT_G (4375LL)
#define SENSOR_PI_DOUBLE (SENSOR_PI / 1000000.0)
#define SENSOR_DEG2RAD_DOUBLE (SENSOR_PI_DOUBLE / 180)
#define SENSOR_G_DOUBLE (SENSOR_G / 1000000.0)
#if CONFIG_ISM330DHCX_ACCEL_FS == 0
#define ISM330DHCX_ACCEL_FS_RUNTIME 1
#define ISM330DHCX_DEFAULT_ACCEL_FULLSCALE 0
#define ISM330DHCX_DEFAULT_ACCEL_SENSITIVITY GAIN_UNIT_XL
#elif CONFIG_ISM330DHCX_ACCEL_FS == 2
#define ISM330DHCX_DEFAULT_ACCEL_FULLSCALE 0
#define ISM330DHCX_DEFAULT_ACCEL_SENSITIVITY GAIN_UNIT_XL
#elif CONFIG_ISM330DHCX_ACCEL_FS == 4
#define ISM330DHCX_DEFAULT_ACCEL_FULLSCALE 2
#define ISM330DHCX_DEFAULT_ACCEL_SENSITIVITY (2.0 * GAIN_UNIT_XL)
#elif CONFIG_ISM330DHCX_ACCEL_FS == 8
#define ISM330DHCX_DEFAULT_ACCEL_FULLSCALE 3
#define ISM330DHCX_DEFAULT_ACCEL_SENSITIVITY (4.0 * GAIN_UNIT_XL)
#elif CONFIG_ISM330DHCX_ACCEL_FS == 16
#define ISM330DHCX_DEFAULT_ACCEL_FULLSCALE 1
#define ISM330DHCX_DEFAULT_ACCEL_SENSITIVITY (8.0 * GAIN_UNIT_XL)
#endif
#if (CONFIG_ISM330DHCX_ACCEL_ODR == 0)
#define ISM330DHCX_ACCEL_ODR_RUNTIME 1
#endif
#define GYRO_FULLSCALE_125 4
#if CONFIG_ISM330DHCX_GYRO_FS == 0
#define ISM330DHCX_GYRO_FS_RUNTIME 1
#define ISM330DHCX_DEFAULT_GYRO_FULLSCALE 4
#define ISM330DHCX_DEFAULT_GYRO_SENSITIVITY GAIN_UNIT_G
#elif CONFIG_ISM330DHCX_GYRO_FS == 125
#define ISM330DHCX_DEFAULT_GYRO_FULLSCALE 4
#define ISM330DHCX_DEFAULT_GYRO_SENSITIVITY GAIN_UNIT_G
#elif CONFIG_ISM330DHCX_GYRO_FS == 250
#define ISM330DHCX_DEFAULT_GYRO_FULLSCALE 0
#define ISM330DHCX_DEFAULT_GYRO_SENSITIVITY (2.0 * GAIN_UNIT_G)
#elif CONFIG_ISM330DHCX_GYRO_FS == 500
#define ISM330DHCX_DEFAULT_GYRO_FULLSCALE 1
#define ISM330DHCX_DEFAULT_GYRO_SENSITIVITY (4.0 * GAIN_UNIT_G)
#elif CONFIG_ISM330DHCX_GYRO_FS == 1000
#define ISM330DHCX_DEFAULT_GYRO_FULLSCALE 2
#define ISM330DHCX_DEFAULT_GYRO_SENSITIVITY (8.0 * GAIN_UNIT_G)
#elif CONFIG_ISM330DHCX_GYRO_FS == 2000
#define ISM330DHCX_DEFAULT_GYRO_FULLSCALE 3
#define ISM330DHCX_DEFAULT_GYRO_SENSITIVITY (16.0 * GAIN_UNIT_G)
#endif
#if (CONFIG_ISM330DHCX_GYRO_ODR == 0)
#define ISM330DHCX_GYRO_ODR_RUNTIME 1
#endif
struct ism330dhcx_config {
char *bus_name;
int (*bus_init)(struct device *dev);
#ifdef CONFIG_ISM330DHCX_TRIGGER
const char *int_gpio_port;
u8_t int_gpio_pin;
u8_t int_gpio_flags;
u8_t int_pin;
#endif /* CONFIG_ISM330DHCX_TRIGGER */
#ifdef DT_ST_ISM330DHCX_BUS_I2C
u16_t i2c_slv_addr;
#elif DT_ST_ISM330DHCX_BUS_SPI
struct spi_config spi_conf;
#if defined(DT_INST_0_ST_ISM330DHCX_CS_GPIOS_CONTROLLER)
const char *gpio_cs_port;
u8_t cs_gpio;
#endif /* DT_INST_0_ST_ISM330DHCX_CS_GPIOS_CONTROLLER */
#endif /* DT_ST_ISM330DHCX_BUS_I2C */
};
union samples {
u8_t raw[6];
struct {
s16_t axis[3];
};
} __aligned(2);
/* sensor data forward declaration (member definition is below) */
struct ism330dhcx_data;
struct ism330dhcx_tf {
int (*read_data)(struct ism330dhcx_data *data, u8_t reg_addr,
u8_t *value, u8_t len);
int (*write_data)(struct ism330dhcx_data *data, u8_t reg_addr,
u8_t *value, u8_t len);
int (*read_reg)(struct ism330dhcx_data *data, u8_t reg_addr,
u8_t *value);
int (*write_reg)(struct ism330dhcx_data *data, u8_t reg_addr,
u8_t value);
int (*update_reg)(struct ism330dhcx_data *data, u8_t reg_addr,
u8_t mask, u8_t value);
};
#define ISM330DHCX_SHUB_MAX_NUM_SLVS 2
struct ism330dhcx_data {
struct device *bus;
s16_t acc[3];
u32_t acc_gain;
s16_t gyro[3];
u32_t gyro_gain;
#if defined(CONFIG_ISM330DHCX_ENABLE_TEMP)
int temp_sample;
#endif
#if defined(CONFIG_ISM330DHCX_SENSORHUB)
u8_t ext_data[2][6];
u16_t magn_gain;
struct hts221_data {
s16_t x0;
s16_t x1;
s16_t y0;
s16_t y1;
} hts221;
#endif /* CONFIG_ISM330DHCX_SENSORHUB */
stmdev_ctx_t *ctx;
#ifdef DT_ST_ISM330DHCX_BUS_I2C
stmdev_ctx_t ctx_i2c;
#elif DT_ST_ISM330DHCX_BUS_SPI
stmdev_ctx_t ctx_spi;
#endif
u16_t accel_freq;
u8_t accel_fs;
u16_t gyro_freq;
u8_t gyro_fs;
#ifdef CONFIG_ISM330DHCX_TRIGGER
struct device *gpio;
struct gpio_callback gpio_cb;
sensor_trigger_handler_t handler_drdy_acc;
sensor_trigger_handler_t handler_drdy_gyr;
sensor_trigger_handler_t handler_drdy_temp;
#if defined(CONFIG_ISM330DHCX_TRIGGER_OWN_THREAD)
K_THREAD_STACK_MEMBER(thread_stack, CONFIG_ISM330DHCX_THREAD_STACK_SIZE);
struct k_thread thread;
struct k_sem gpio_sem;
#elif defined(CONFIG_ISM330DHCX_TRIGGER_GLOBAL_THREAD)
struct k_work work;
struct device *dev;
#endif
#endif /* CONFIG_ISM330DHCX_TRIGGER */
#if defined(DT_INST_0_ST_ISM330DHCX_CS_GPIOS_CONTROLLER)
struct spi_cs_control cs_ctrl;
#endif
};
int ism330dhcx_spi_init(struct device *dev);
int ism330dhcx_i2c_init(struct device *dev);
#if defined(CONFIG_ISM330DHCX_SENSORHUB)
int ism330dhcx_shub_init(struct device *dev);
int ism330dhcx_shub_fetch_external_devs(struct device *dev);
int ism330dhcx_shub_get_idx(enum sensor_channel type);
int ism330dhcx_shub_config(struct device *dev, enum sensor_channel chan,
enum sensor_attribute attr,
const struct sensor_value *val);
#endif /* CONFIG_ISM330DHCX_SENSORHUB */
#ifdef CONFIG_ISM330DHCX_TRIGGER
int ism330dhcx_trigger_set(struct device *dev,
const struct sensor_trigger *trig,
sensor_trigger_handler_t handler);
int ism330dhcx_init_interrupt(struct device *dev);
#endif
#endif /* ZEPHYR_DRIVERS_SENSOR_ISM330DHCX_ISM330DHCX_H_ */