zephyr/drivers/sensor/bme680/bme680.h

171 lines
5.0 KiB
C

/*
* Copyright (c) 2018 Bosch Sensortec GmbH
*
* SPDX-License-Identifier: Apache-2.0
*/
#ifndef __SENSOR_BME680_H__
#define __SENSOR_BME680_H__
#include <device.h>
#include <zephyr/types.h>
#define BME680_CHIP_ID 0x61
#define BME680_LEN_FIELD 15
#define BME680_LEN_COEFF_ALL 42
#define BME680_LEN_COEFF1 23
#define BME680_LEN_COEFF2 14
#define BME680_LEN_COEFF3 5
#define BME680_REG_COEFF3 0x00
#define BME680_REG_FIELD0 0x1d
#define BME680_REG_IDAC_HEAT0 0x50
#define BME680_REG_RES_HEAT0 0x5A
#define BME680_REG_GAS_WAIT0 0x64
#define BME680_REG_SHD_HEATR_DUR 0x6E
#define BME680_REG_CTRL_GAS_0 0x70
#define BME680_REG_CTRL_GAS_1 0x71
#define BME680_REG_CTRL_HUM 0x72
#define BME680_REG_CTRL_MEAS 0x74
#define BME680_REG_CONFIG 0x75
#define BME680_REG_MEM_PAGE 0xf3
#define BME680_REG_UNIQUE_ID 0x83
#define BME680_REG_COEFF1 0x8a
#define BME680_REG_CHIP_ID 0xd0
#define BME680_REG_SOFT_RESET 0xe0
#define BME680_REG_COEFF2 0xe1
#define BME680_MSK_NEW_DATA 0x80
#define BME680_MSK_GAS_RANGE 0x0f
#define BME680_MSK_RH_RANGE 0x30
#define BME680_MSK_RANGE_SW_ERR 0xf0
#define BME680_MSK_HEATR_STAB 0x10
#if defined CONFIG_BME680_TEMP_OVER_1X
#define BME680_TEMP_OVER (1 << 5)
#elif defined CONFIG_BME680_TEMP_OVER_2X
#define BME680_TEMP_OVER (2 << 5)
#elif defined CONFIG_BME680_TEMP_OVER_4X
#define BME680_TEMP_OVER (3 << 5)
#elif defined CONFIG_BME680_TEMP_OVER_8X
#define BME680_TEMP_OVER (4 << 5)
#elif defined CONFIG_BME680_TEMP_OVER_16X
#define BME680_TEMP_OVER (5 << 5)
#endif
#if defined CONFIG_BME680_PRESS_OVER_1X
#define BME680_PRESS_OVER (1 << 2)
#elif defined CONFIG_BME680_PRESS_OVER_2X
#define BME680_PRESS_OVER (2 << 2)
#elif defined CONFIG_BME680_PRESS_OVER_4X
#define BME680_PRESS_OVER (3 << 2)
#elif defined CONFIG_BME680_PRESS_OVER_8X
#define BME680_PRESS_OVER (4 << 2)
#elif defined CONFIG_BME680_PRESS_OVER_16X
#define BME680_PRESS_OVER (5 << 2)
#endif
#if defined CONFIG_BME680_HUMIDITY_OVER_1X
#define BME680_HUMIDITY_OVER 1
#elif defined CONFIG_BME680_HUMIDITY_OVER_2X
#define BME680_HUMIDITY_OVER 2
#elif defined CONFIG_BME680_HUMIDITY_OVER_4X
#define BME680_HUMIDITY_OVER 3
#elif defined CONFIG_BME680_HUMIDITY_OVER_8X
#define BME680_HUMIDITY_OVER 4
#elif defined CONFIG_BME680_HUMIDITY_OVER_16X
#define BME680_HUMIDITY_OVER 5
#endif
#if defined CONFIG_BME680_HEATR_TEMP_LP
#define BME680_HEATR_TEMP 320
#elif defined CONFIG_BME680_HEATR_TEMP_ULP
#define BME680_HEATR_TEMP 400
#endif
#if defined CONFIG_BME680_HEATR_DUR_LP
#define BME680_HEATR_DUR_MS 197
#elif defined CONFIG_BME680_HEATR_DUR_ULP
#define BME680_HEATR_DUR_MS 1943
#endif
#if defined CONFIG_BME680_FILTER_OFF
#define BME680_FILTER 0
#elif defined CONFIG_BME680_FILTER_2
#define BME680_FILTER (1 << 2)
#elif defined CONFIG_BME680_FILTER_4
#define BME680_FILTER (2 << 2)
#elif defined CONFIG_BME680_FILTER_8
#define BME680_FILTER (3 << 2)
#elif defined CONFIG_BME680_FILTER_16
#define BME680_FILTER (4 << 2)
#elif defined CONFIG_BME680_FILTER_32
#define BME680_FILTER (5 << 2)
#elif defined CONFIG_BME680_FILTER_64
#define BME680_FILTER (6 << 2)
#elif defined CONFIG_BME680_FILTER_128
#define BME680_FILTER (7 << 2)
#endif
#define BME680_MODE_SLEEP 0
#define BME680_MODE_FORCED 1
#define BME680_CTRL_MEAS_VAL (BME680_PRESS_OVER | BME680_TEMP_OVER \
| BME680_MODE_FORCED)
#define BME680_CONFIG_VAL BME680_FILTER
#define BME680_CTRL_GAS_1_VAL 0x10
#define BME680_CONCAT_BYTES(msb, lsb) (((u16_t)msb << 8) | (u16_t)lsb)
struct bme680_data {
struct device *i2c_master;
u16_t i2c_slave_addr;
/* Compensation parameters. */
u16_t par_h1;
u16_t par_h2;
s8_t par_h3;
s8_t par_h4;
s8_t par_h5;
u8_t par_h6;
s8_t par_h7;
s8_t par_gh1;
s16_t par_gh2;
s8_t par_gh3;
u16_t par_t1;
s16_t par_t2;
s8_t par_t3;
u16_t par_p1;
s16_t par_p2;
s8_t par_p3;
s16_t par_p4;
s16_t par_p5;
s8_t par_p6;
s8_t par_p7;
s16_t par_p8;
s16_t par_p9;
u8_t par_p10;
u8_t res_heat_range;
s8_t res_heat_val;
s8_t range_sw_err;
/* Calculated sensor values. */
s32_t calc_temp;
u32_t calc_press;
u32_t calc_humidity;
u32_t calc_gas_resistance;
/* Additional information */
u8_t new_data;
u8_t heatr_stab;
/* Carryover between temperature and pressure/humidity compensation. */
s32_t t_fine;
u8_t chip_id;
};
#endif /* __SENSOR_BME680_H__ */