299 lines
8.5 KiB
Plaintext
299 lines
8.5 KiB
Plaintext
# Copyright (c) 2017 - 2018, Nordic Semiconductor ASA
|
|
# SPDX-License-Identifier: Apache-2.0
|
|
|
|
menuconfig SPI_NRFX
|
|
bool "nRF SPI nrfx drivers"
|
|
default y
|
|
depends on SOC_FAMILY_NRF
|
|
help
|
|
Enable support for nrfx SPI drivers for nRF MCU series.
|
|
Peripherals with the same instance ID cannot be used together,
|
|
e.g. SPI_0 and I2C_0. You may need to disable I2C_0 or I2C_1.
|
|
|
|
if SPI_NRFX
|
|
|
|
config SOC_NRF52832_ALLOW_SPIM_DESPITE_PAN_58
|
|
depends on SOC_NRF52832
|
|
bool "Allow enabling the SPIM driver despite PAN 58"
|
|
help
|
|
Allow enabling the nRF SPI Master with EasyDMA, despite
|
|
Product Anomaly Notice 58 (SPIM: An additional byte is
|
|
clocked out when RXD.MAXCNT == 1 and TXD.MAXCNT <= 1).
|
|
Without this override, the SPI Master is only available
|
|
without EasyDMA. Note that the 'SPIM' and 'SPIS' drivers
|
|
use EasyDMA, while the 'SPI' driver does not. Use this
|
|
option ONLY if you are certain that transactions with
|
|
RXD.MAXCNT == 1 and TXD.MAXCNT <= 1 will NOT be executed.
|
|
|
|
# In most Nordic SoCs, SPI and TWI peripherals with the same instance number
|
|
# share certain resources and therefore cannot be used at the same time
|
|
# (in nRF91 Series this limitation concerns UART peripherals as well).
|
|
# In nRF52810 though, there are only single instances of these peripherals
|
|
# and they are arranged in a different way, so this limitation does not apply.
|
|
if SPI_0 && (SOC_NRF52810 || \
|
|
(!I2C_0 && !(SOC_SERIES_NRF91X && UART_0_NRF_UARTE)))
|
|
|
|
choice
|
|
prompt "SPI Port 0 Driver type"
|
|
|
|
config SPI_0_NRF_SPI
|
|
bool "nRF SPI 0"
|
|
depends on HAS_HW_NRF_SPI0
|
|
select NRFX_SPI0
|
|
help
|
|
Enable nRF SPI Master without EasyDMA on port 0.
|
|
|
|
config SPI_0_NRF_SPIM
|
|
bool "nRF SPIM 0"
|
|
# This driver is not available for nRF52832 because of Product Anomaly 58
|
|
# (SPIM: An additional byte is clocked out when RXD.MAXCNT == 1 and TXD.MAXCNT <= 1)
|
|
# Allow the 'EasyDMA' driver only if this automatic safety-disable is overridden
|
|
depends on HAS_HW_NRF_SPIM0 && (!SOC_NRF52832 || SOC_NRF52832_ALLOW_SPIM_DESPITE_PAN_58)
|
|
select NRFX_SPIM0
|
|
help
|
|
Enable nRF SPI Master with EasyDMA on port 0.
|
|
|
|
config SPI_0_NRF_SPIS
|
|
bool "nRF SPIS 0"
|
|
depends on HAS_HW_NRF_SPIS0
|
|
depends on SPI_SLAVE
|
|
select NRFX_SPIS0
|
|
help
|
|
Enable nRF SPI Slave with EasyDMA on port 0.
|
|
Due to hardware limitations the implementation supports only simple
|
|
buffers (consisting of one part) located in RAM.
|
|
|
|
endchoice
|
|
|
|
if SPI_0_NRF_SPI || SPI_0_NRF_SPIM || SPI_0_NRF_SPIS
|
|
|
|
config SPI_0_NRF_ORC
|
|
hex "SPI Port 0 over-read character"
|
|
range 0x00 0xff
|
|
default 0xff
|
|
help
|
|
Over-read character. Character clocked out after an over-read
|
|
of the transmit buffer.
|
|
|
|
endif # SPI_0_NRF_SPI || SPI_0_NRF_SPIM || SPI_0_NRF_SPIS
|
|
|
|
endif # SPI_0 && (SOC_NRF52810 || ...
|
|
|
|
# In Nordic SoCs, SPI and TWI peripherals with the same instance number
|
|
# share certain resources and therefore cannot be used at the same time
|
|
# (in nRF91 Series this limitation concerns UART peripherals as well).
|
|
if SPI_1 && !I2C_1 && !(SOC_SERIES_NRF91X && UART_1_NRF_UARTE)
|
|
|
|
choice
|
|
prompt "SPI Port 1 Driver type"
|
|
|
|
config SPI_1_NRF_SPI
|
|
bool "nRF SPI 1"
|
|
depends on HAS_HW_NRF_SPI1
|
|
select NRFX_SPI1
|
|
help
|
|
Enable nRF SPI Master without EasyDMA on port 1.
|
|
|
|
config SPI_1_NRF_SPIM
|
|
bool "nRF SPIM 1"
|
|
# This driver is not available for nRF52832 because of Product Anomaly 58
|
|
# (SPIM: An additional byte is clocked out when RXD.MAXCNT == 1 and TXD.MAXCNT <= 1)
|
|
# Allow the 'EasyDMA' driver only if this automatic safety-disable is overridden
|
|
depends on HAS_HW_NRF_SPIM1 && (!SOC_NRF52832 || SOC_NRF52832_ALLOW_SPIM_DESPITE_PAN_58)
|
|
select NRFX_SPIM1
|
|
help
|
|
Enable nRF SPI Master with EasyDMA on port 1.
|
|
|
|
config SPI_1_NRF_SPIS
|
|
bool "nRF SPIS 1"
|
|
depends on HAS_HW_NRF_SPIS1
|
|
depends on SPI_SLAVE
|
|
select NRFX_SPIS1
|
|
help
|
|
Enable nRF SPI Slave with EasyDMA on port 1.
|
|
Due to hardware limitations the implementation supports only simple
|
|
buffers (consisting of one part) located in RAM.
|
|
|
|
endchoice
|
|
|
|
if SPI_1_NRF_SPI || SPI_1_NRF_SPIM || SPI_1_NRF_SPIS
|
|
|
|
config SPI_1_NRF_ORC
|
|
hex "SPI Port 1 over-read character"
|
|
range 0x00 0xff
|
|
default 0xff
|
|
help
|
|
Over-read character. Character clocked out after an over-read
|
|
of the transmit buffer.
|
|
|
|
endif # SPI_1_NRF_SPI || SPI_1_NRF_SPIM || SPI_1_NRF_SPIS
|
|
|
|
endif # SPI_1 && !I2C_1 && !(SOC_SERIES_NRF91X && UART_1_NRF_UARTE)
|
|
|
|
# In Nordic SoCs, SPI and TWI peripherals with the same instance number
|
|
# share certain resources and therefore cannot be used at the same time
|
|
# (in nRF91 Series this limitation concerns UART peripherals as well).
|
|
if SPI_2 && !I2C_2 && !(SOC_SERIES_NRF91X && UART_2_NRF_UARTE)
|
|
|
|
choice
|
|
prompt "SPI Port 2 Driver type"
|
|
|
|
config SPI_2_NRF_SPI
|
|
bool "nRF SPI 2"
|
|
depends on HAS_HW_NRF_SPI2
|
|
select NRFX_SPI2
|
|
help
|
|
Enable nRF SPI Master without EasyDMA on port 2.
|
|
|
|
config SPI_2_NRF_SPIM
|
|
bool "nRF SPIM 2"
|
|
# This driver is not available for nRF52832 because of Product Anomaly 58
|
|
# (SPIM: An additional byte is clocked out when RXD.MAXCNT == 1 and TXD.MAXCNT <= 1)
|
|
# Allow the 'EasyDMA' driver only if this automatic safety-disable is overridden
|
|
depends on HAS_HW_NRF_SPIM2 && (!SOC_NRF52832 || SOC_NRF52832_ALLOW_SPIM_DESPITE_PAN_58)
|
|
select NRFX_SPIM2
|
|
help
|
|
Enable nRF SPI Master with EasyDMA on port 2.
|
|
|
|
config SPI_2_NRF_SPIS
|
|
bool "nRF SPIS 2"
|
|
depends on HAS_HW_NRF_SPIS2
|
|
depends on SPI_SLAVE
|
|
select NRFX_SPIS2
|
|
help
|
|
Enable nRF SPI Slave with EasyDMA on port 2.
|
|
Due to hardware limitations the implementation supports only simple
|
|
buffers (consisting of one part) located in RAM.
|
|
|
|
endchoice
|
|
|
|
if SPI_2_NRF_SPI || SPI_2_NRF_SPIM || SPI_2_NRF_SPIS
|
|
|
|
config SPI_2_NRF_ORC
|
|
hex "SPI Port 2 over-read character"
|
|
range 0x00 0xff
|
|
default 0xff
|
|
help
|
|
Over-read character. Character clocked out after an over-read
|
|
of the transmit buffer.
|
|
|
|
endif # SPI_2_NRF_SPI || SPI_2_NRF_SPIM || SPI_2_NRF_SPIS
|
|
|
|
endif # SPI_2 && !I2C_2 && !(SOC_SERIES_NRF91X && UART_2_NRF_UARTE)
|
|
|
|
# In Nordic SoCs, SPI and TWI peripherals with the same instance number
|
|
# share certain resources and therefore cannot be used at the same time
|
|
# (in nRF91 Series this limitation concerns UART peripherals as well).
|
|
if SPI_3 && !I2C_3 && !(SOC_SERIES_NRF91X && UART_3_NRF_UARTE)
|
|
|
|
choice
|
|
prompt "SPI Port 3 Driver type"
|
|
|
|
config SPI_3_NRF_SPIM
|
|
bool "nRF SPIM 3"
|
|
depends on HAS_HW_NRF_SPIM3
|
|
select NRFX_SPIM3
|
|
help
|
|
Enable nRF SPI Master with EasyDMA on port 3.
|
|
|
|
config SPI_3_NRF_SPIS
|
|
bool "nRF SPIS 3"
|
|
depends on HAS_HW_NRF_SPIS3
|
|
depends on SPI_SLAVE
|
|
select NRFX_SPIS3
|
|
help
|
|
Enable nRF SPI Slave with EasyDMA on port 3.
|
|
Due to hardware limitations the implementation supports only simple
|
|
buffers (consisting of one part) located in RAM.
|
|
|
|
endchoice
|
|
|
|
if SPI_3_NRF_SPIM || SPI_3_NRF_SPIS
|
|
|
|
config SPI_3_NRF_ORC
|
|
hex "SPI Port 3 over-read character"
|
|
range 0x00 0xff
|
|
default 0xff
|
|
help
|
|
Over-read character. Character clocked out after an over-read
|
|
of the transmit buffer.
|
|
|
|
endif # SPI_3_NRF_SPIM || SPI_3_NRF_SPIS
|
|
|
|
config SPI_3_NRF_RX_DELAY
|
|
int "SPIM3 MISO sampling delay"
|
|
depends on SPI_3_NRF_SPIM && SOC_NRF52840
|
|
range 0 7
|
|
default 2
|
|
help
|
|
Number of 64 MHz clock cycles (15.625 ns) delay from the sampling
|
|
edge of SCK (leading or trailing, depending on the CPHA setting used)
|
|
until the input serial data on MISO is actually sampled.
|
|
|
|
endif # SPI_3 && !I2C_3 && !(SOC_SERIES_NRF91X && UART_3_NRF_UARTE)
|
|
|
|
if NRFX_SPIM
|
|
|
|
config SPI_NRFX_RAM_BUFFER_SIZE
|
|
int "Size of RAM buffers for SPIM peripherals"
|
|
default 0
|
|
help
|
|
SPIM peripherals cannot transmit data directly from flash. Therefore,
|
|
a buffer in RAM needs to be provided for each instance of SPI driver
|
|
using SPIM peripheral, so that the driver can copy there a chunk of
|
|
data from flash and transmit it.
|
|
The size is specified in bytes. A size of 0 means that this feature
|
|
should be disabled, and the application must then take care of not
|
|
supplying buffers located in flash to the driver, otherwise such
|
|
transfers will fail.
|
|
|
|
choice
|
|
prompt "nRF SPIM MISO pin pull configuration"
|
|
default SPI_NRFX_SPIM_MISO_PULL_DOWN
|
|
|
|
config SPI_NRFX_SPIM_MISO_NO_PULL
|
|
bool "no pull"
|
|
help
|
|
Disable MISO pin pull.
|
|
|
|
config SPI_NRFX_SPIM_MISO_PULL_DOWN
|
|
bool "pull down"
|
|
help
|
|
Enable MISO pin pull down.
|
|
|
|
config SPI_NRFX_SPIM_MISO_PULL_UP
|
|
bool "pull up"
|
|
help
|
|
Enable MISO pin pull up.
|
|
|
|
endchoice
|
|
|
|
endif # NRFX_SPIM
|
|
|
|
if NRFX_SPI
|
|
|
|
choice
|
|
prompt "nRF SPI MISO pin pull configuration"
|
|
default SPI_NRFX_SPI_MISO_PULL_DOWN
|
|
|
|
config SPI_NRFX_SPI_MISO_NO_PULL
|
|
bool "no pull"
|
|
help
|
|
Disable MISO pin pull.
|
|
|
|
config SPI_NRFX_SPI_MISO_PULL_DOWN
|
|
bool "pull down"
|
|
help
|
|
Enable MISO pin pull down.
|
|
|
|
config SPI_NRFX_SPI_MISO_PULL_UP
|
|
bool "pull up"
|
|
help
|
|
Enable MISO pin pull up.
|
|
|
|
endchoice
|
|
|
|
endif # NRFX_SPI
|
|
|
|
endif # SPI_NRFX
|