65 lines
1.8 KiB
YAML
65 lines
1.8 KiB
YAML
# Copyright (c) 2020 Nordic Semiconductor ASA
|
|
# SPDX-License-Identifier: Apache-2.0
|
|
|
|
description: Atmel AT45 (or compatible) SPI flash
|
|
|
|
compatible: "atmel,at45"
|
|
|
|
include: [spi-device.yaml]
|
|
|
|
properties:
|
|
jedec-id:
|
|
type: uint8-array
|
|
required: true
|
|
description: JEDEC ID as manufacturer ID (1 byte) and device ID (2 bytes).
|
|
|
|
size:
|
|
type: int
|
|
required: true
|
|
description: Flash capacity in bits.
|
|
|
|
sector-size:
|
|
type: int
|
|
required: true
|
|
description: Flash sector size in bytes.
|
|
|
|
block-size:
|
|
type: int
|
|
required: true
|
|
description: Flash block size in bytes.
|
|
|
|
page-size:
|
|
type: int
|
|
required: true
|
|
description: Flash page size in bytes.
|
|
|
|
use-udpd:
|
|
type: boolean
|
|
required: false
|
|
description: |
|
|
When set, the driver will use the Ultra-Deep Power-Down command instead
|
|
of the default Deep Power-Down one to put the chip into low power mode.
|
|
|
|
From the driver perspective, as it does not rely on the contents of the
|
|
SRAM buffers in the chip, the difference between the Deep and Ultra-Deep
|
|
Power-Down modes is that the chip consumes far less power in the latter
|
|
but needs some more time to enter this mode and to exit from it.
|
|
|
|
enter-dpd-delay:
|
|
type: int
|
|
required: false
|
|
default: 0
|
|
description: |
|
|
Time, in nanoseconds, needed by the chip to enter the Deep Power-Down
|
|
mode (or Ultra-Deep Power-Down mode when the "use-udpd" property is set)
|
|
after the corresponding command is issued.
|
|
|
|
exit-dpd-delay:
|
|
type: int
|
|
required: false
|
|
default: 0
|
|
description: |
|
|
Time, in nanoseconds, needed by the chip to exit from the Deep Power-Down
|
|
mode (or Ultra-Deep Power-Down mode when the "use-udpd" property is set)
|
|
after the corresponding command is issued.
|