zephyr

History

Johan Hedberg b9588d8eb6 Bluetooth: Mesh: Switch to using Linux Foundation Company ID The Linux Foundation now has an assigned Company Identifier, so switch to using that. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>		2018-03-05 19:54:21 -05:00
..
src	Bluetooth: Mesh: Switch to using Linux Foundation Company ID	2018-03-05 19:54:21 -05:00
CMakeLists.txt	cmake: Don't link with subsys__bluetooth unnecessarily	2017-12-19 12:46:03 -05:00
README.rst	samples: bluetooth: mesh: Add basic documentation	2018-03-05 19:53:48 -05:00
microbit_gatt.conf	…
prj.conf	Bluetooth: Mesh: Add IV Update test mode API	2017-11-27 10:17:54 +02:00
prj_bbc_microbit.conf	Introduce cmake-based rewrite of KBuild	2017-11-08 20:00:22 -05:00
prj_nrf51_blenano.conf	Introduce cmake-based rewrite of KBuild	2017-11-08 20:00:22 -05:00
sample.yaml	samples: bluetooth and net samples need test setup	2017-12-28 20:24:29 -05:00

README.rst

.. _ble_mesh:

Bluetooth: Mesh
###############

Overview
********

This sample demonstrates Bluetooth Mesh functionality. It has several
standard Mesh models, and supports provisioning over both the
Advertising and the GATT Provisioning Bearers (i.e. PB-ADV and PB-GATT).
The application also needs a functioning serial console, since that's
used for the Out-of-Band provisioning procedure.

Requirements
************

* A board with Bluetooth LE support, or
* QEMU with BlueZ running on the host

Building and Running
********************

This sample can be found under :file:`samples/bluetooth/mesh` in the
Zephyr tree.

See :ref:`bluetooth setup section <bluetooth_setup>` for details on how
to run the sample inside QEMU.

For other boards, build and flash the application as follows:

.. zephyr-app-commands::
   :zephyr-app: samples/bluetooth/mesh
   :board: <board>
   :goals: flash
   :compact:

Refer to your :ref:`board's documentation <boards>` for alternative
flash instructions if your board doesn't support the ``flash`` target.