92 lines
2.1 KiB
Plaintext
92 lines
2.1 KiB
Plaintext
# Kconfig - STM32 I2S driver configuration options
|
|
#
|
|
# Copyright (c) 2018 STMicroelectronics
|
|
#
|
|
# SPDX-License-Identifier: Apache-2.0
|
|
#
|
|
|
|
menuconfig I2S_STM32
|
|
bool "STM32 MCU I2S controller driver"
|
|
depends on I2S && SOC_SERIES_STM32F4X
|
|
select DMA
|
|
help
|
|
Enable I2S support on the STM32 family of processors.
|
|
(Tested on the STM32F4 series)
|
|
|
|
if I2S_STM32
|
|
|
|
config I2S_STM32_RX_BLOCK_COUNT
|
|
int "RX queue length"
|
|
default 4
|
|
|
|
config I2S_STM32_TX_BLOCK_COUNT
|
|
int "TX queue length"
|
|
default 4
|
|
|
|
config I2S_STM32_USE_PLLI2S_ENABLE
|
|
bool "Enable usage of PLL"
|
|
help
|
|
Enable it if I2S clock should be provided by the PLLI2S.
|
|
If not enabled the clock will be provided by HSI/HSE.
|
|
|
|
config I2S_STM32_PLLI2S_PLLM
|
|
int "Division factor for PLLI2S VCO input clock"
|
|
depends on I2S_STM32_USE_PLLI2S_ENABLE
|
|
default 8
|
|
range 2 63
|
|
help
|
|
Division factor for the audio PLL (PLLI2S) VCO input clock.
|
|
PLLM factor should be selected to ensure that the VCO
|
|
input frequency ranges from 1 to 2 MHz. It is recommended
|
|
to select a frequency of 2 MHz to limit PLL jitter.
|
|
Allowed values: 2-63
|
|
|
|
config I2S_STM32_PLLI2S_PLLN
|
|
int "Multiplier factor for PLLI2S VCO output clock"
|
|
depends on I2S_STM32_USE_PLLI2S_ENABLE
|
|
default 56
|
|
range 50 432
|
|
help
|
|
Multiply factor for the audio PLL (PLLI2S) VCO output clock.
|
|
PLLN factor should be selected to ensure that the VCO
|
|
output frequency ranges from 100 to 432 MHz.
|
|
Allowed values: 50-432
|
|
|
|
config I2S_STM32_PLLI2S_PLLR
|
|
int "Division factor for I2S clock"
|
|
depends on I2S_STM32_USE_PLLI2S_ENABLE
|
|
default 7
|
|
range 2 7
|
|
help
|
|
Division factor for the I2S clock.
|
|
PLLR factor should be selected to ensure that the I2S clock
|
|
frequency is less than or equal to 192MHz.
|
|
Allowed values: 2-7
|
|
|
|
config I2S_1
|
|
bool "I2S port 1"
|
|
help
|
|
Enable I2S controller port 1.
|
|
|
|
config I2S_2
|
|
bool "I2S port 2"
|
|
help
|
|
Enable I2S controller port 2.
|
|
|
|
config I2S_3
|
|
bool "I2S port 3"
|
|
help
|
|
Enable I2S controller port 3.
|
|
|
|
config I2S_4
|
|
bool "I2S port 4"
|
|
help
|
|
Enable I2S controller port 4.
|
|
|
|
config I2S_5
|
|
bool "I2S port 5"
|
|
help
|
|
Enable I2S controller port 5.
|
|
|
|
endif # I2S_STM32
|