zephyr/arch/nios2/core/cache.c

93 lines
2.6 KiB
C

/*
* Copyright (c) 2016 Intel Corporation
*
* SPDX-License-Identifier: Apache-2.0
*/
#include <arch/cpu.h>
#include <misc/__assert.h>
/**
* Flush the entire instruction cache and pipeline.
*
* You will need to call this function if the application writes new program
* text to memory, such as a boot copier or runtime synthesis of code. If the
* new text was written with instructions that do not bypass cache memories,
* this should immediately be followed by an invocation of
* _nios2_dcache_flush_all() so that cached instruction data is committed to
* RAM.
*
* See Chapter 9 of the Nios II Gen 2 Software Developer's Handbook for more
* information on cache considerations.
*/
#if ALT_CPU_ICACHE_SIZE > 0
void _nios2_icache_flush_all(void)
{
u32_t i;
for (i = 0; i < ALT_CPU_ICACHE_SIZE; i += ALT_CPU_ICACHE_LINE_SIZE) {
_nios2_icache_flush(i);
}
/* Get rid of any stale instructions in the pipeline */
_nios2_pipeline_flush();
}
#endif
/**
* Flush the entire data cache.
*
* This will be typically needed after writing new program text to memory
* after flushing the instruction cache.
*
* The Nios II does not support hardware cache coherency for multi-master
* or multi-processor systems and software coherency must be implemented
* when communicating with shared memory. If support for this is introduced
* in Zephyr additional APIs for flushing ranges of the data cache will need
* to be implemented.
*
* See Chapter 9 of the Nios II Gen 2 Software Developer's Handbook for more
* information on cache considerations.
*/
#if ALT_CPU_DCACHE_SIZE > 0
void _nios2_dcache_flush_all(void)
{
u32_t i;
for (i = 0; i < ALT_CPU_DCACHE_SIZE; i += ALT_CPU_DCACHE_LINE_SIZE) {
_nios2_dcache_flush(i);
}
}
#endif
/*
* _nios2_dcache_flush_no_writeback() is called to flush the data cache for a
* memory region of length "len" bytes, starting at address "start".
*
* Any dirty lines in the data cache are NOT written back to memory.
* Make sure you really want this behavior. If you aren't 100% sure,
* use the _nios2_dcache_flush() routine instead.
*/
#if ALT_CPU_DCACHE_SIZE > 0
void _nios2_dcache_flush_no_writeback(void *start, u32_t len)
{
u8_t *i;
u8_t *end = ((char *) start) + len;
for (i = start; i < end; i += ALT_CPU_DCACHE_LINE_SIZE) {
__asm__ volatile ("initda (%0)" :: "r" (i));
}
/*
* For an unaligned flush request, we've got one more line left.
* Note that this is dependent on ALT_CPU_DCACHE_LINE_SIZE to be a
* multiple of 2 (which it always is).
*/
if (((u32_t) start) & (ALT_CPU_DCACHE_LINE_SIZE - 1)) {
__asm__ volatile ("initda (%0)" :: "r" (i));
}
}
#endif