307 lines
7.8 KiB
C
307 lines
7.8 KiB
C
/*
|
|
* Copyright (c) 2019 Brett Witherspoon
|
|
*
|
|
* SPDX-License-Identifier: Apache-2.0
|
|
*/
|
|
|
|
#define LOG_LEVEL CONFIG_SPI_LOG_LEVEL
|
|
#include <logging/log.h>
|
|
LOG_MODULE_REGISTER(spi_cc13xx_cc26xx);
|
|
|
|
#include <spi.h>
|
|
#include <sys_clock.h>
|
|
|
|
#include <driverlib/prcm.h>
|
|
#include <driverlib/ssi.h>
|
|
#include <driverlib/ioc.h>
|
|
|
|
#include "spi_context.h"
|
|
|
|
struct spi_cc13xx_cc26xx_config {
|
|
u32_t base;
|
|
u32_t sck_pin;
|
|
u32_t mosi_pin;
|
|
u32_t miso_pin;
|
|
u32_t cs_pin;
|
|
};
|
|
|
|
struct spi_cc13xx_cc26xx_data {
|
|
struct spi_context ctx;
|
|
};
|
|
|
|
static inline struct spi_cc13xx_cc26xx_data *get_dev_data(struct device *dev)
|
|
{
|
|
return dev->driver_data;
|
|
}
|
|
|
|
static inline const struct spi_cc13xx_cc26xx_config *
|
|
get_dev_config(struct device *dev)
|
|
{
|
|
return dev->config->config_info;
|
|
}
|
|
|
|
static int spi_cc13xx_cc26xx_configure(struct device *dev,
|
|
const struct spi_config *config)
|
|
{
|
|
const struct spi_cc13xx_cc26xx_config *cfg = get_dev_config(dev);
|
|
struct spi_context *ctx = &get_dev_data(dev)->ctx;
|
|
u32_t prot;
|
|
|
|
if (spi_context_configured(ctx, config)) {
|
|
return 0;
|
|
}
|
|
|
|
/* Slave mode has not been implemented */
|
|
if (SPI_OP_MODE_GET(config->operation) != SPI_OP_MODE_MASTER) {
|
|
LOG_ERR("Slave mode is not supported");
|
|
return -ENOTSUP;
|
|
}
|
|
|
|
/* Word sizes other than 8 bits has not been implemented */
|
|
if (SPI_WORD_SIZE_GET(config->operation) != 8) {
|
|
LOG_ERR("Word sizes other than 8 bits are not supported");
|
|
return -ENOTSUP;
|
|
}
|
|
|
|
if (config->operation & SPI_TRANSFER_LSB) {
|
|
LOG_ERR("Transfer LSB first mode is not supported");
|
|
return -EINVAL;
|
|
}
|
|
|
|
if ((config->operation & SPI_LINES_MASK) != SPI_LINES_SINGLE) {
|
|
LOG_ERR("Multiple lines are not supported");
|
|
return -EINVAL;
|
|
}
|
|
|
|
if (config->operation & SPI_CS_ACTIVE_HIGH && !config->cs) {
|
|
LOG_ERR("Active high CS requires emulation through a GPIO line.");
|
|
return -EINVAL;
|
|
}
|
|
|
|
if (config->frequency < 2000000) {
|
|
LOG_ERR("Frequencies lower than 2 MHz are not supported");
|
|
return -EINVAL;
|
|
}
|
|
|
|
if (2 * config->frequency > sys_clock_hw_cycles_per_sec()) {
|
|
LOG_ERR("Frequency greater than supported in master mode");
|
|
return -EINVAL;
|
|
}
|
|
|
|
if (SPI_MODE_GET(config->operation) & SPI_MODE_CPOL) {
|
|
if (SPI_MODE_GET(config->operation) & SPI_MODE_CPHA) {
|
|
prot = SSI_FRF_MOTO_MODE_3;
|
|
} else {
|
|
prot = SSI_FRF_MOTO_MODE_2;
|
|
}
|
|
} else {
|
|
if (SPI_MODE_GET(config->operation) & SPI_MODE_CPHA) {
|
|
prot = SSI_FRF_MOTO_MODE_1;
|
|
} else {
|
|
prot = SSI_FRF_MOTO_MODE_0;
|
|
}
|
|
}
|
|
|
|
IOCPinTypeSsiMaster(cfg->base, cfg->miso_pin, cfg->mosi_pin,
|
|
cfg->cs_pin, cfg->sck_pin);
|
|
|
|
ctx->config = config;
|
|
/* This will reconfigure the CS pin as GPIO if same as cfg->cs_pin. */
|
|
spi_context_cs_configure(ctx);
|
|
|
|
/* Disable SSI before making configuration changes */
|
|
SSIDisable(cfg->base);
|
|
|
|
/* Configure SSI */
|
|
SSIConfigSetExpClk(cfg->base, sys_clock_hw_cycles_per_sec(), prot,
|
|
SSI_MODE_MASTER, config->frequency, 8);
|
|
|
|
if (SPI_MODE_GET(config->operation) & SPI_MODE_LOOP) {
|
|
sys_set_bit(cfg->base + SSI_O_CR1, 0);
|
|
}
|
|
|
|
/* Re-enable SSI after making configuration changes */
|
|
SSIEnable(cfg->base);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int spi_cc13xx_cc26xx_transceive(struct device *dev,
|
|
const struct spi_config *config,
|
|
const struct spi_buf_set *tx_bufs,
|
|
const struct spi_buf_set *rx_bufs)
|
|
{
|
|
const struct spi_cc13xx_cc26xx_config *cfg = get_dev_config(dev);
|
|
struct spi_context *ctx = &get_dev_data(dev)->ctx;
|
|
u32_t txd, rxd;
|
|
int err;
|
|
|
|
spi_context_lock(ctx, false, NULL);
|
|
|
|
err = spi_cc13xx_cc26xx_configure(dev, config);
|
|
if (err) {
|
|
goto done;
|
|
}
|
|
|
|
spi_context_buffers_setup(ctx, tx_bufs, rx_bufs, 1);
|
|
|
|
spi_context_cs_control(ctx, true);
|
|
|
|
do {
|
|
if (spi_context_tx_buf_on(ctx)) {
|
|
txd = *ctx->tx_buf;
|
|
} else {
|
|
txd = 0U;
|
|
}
|
|
|
|
SSIDataPut(cfg->base, txd);
|
|
|
|
spi_context_update_tx(ctx, 1, 1);
|
|
|
|
SSIDataGet(cfg->base, &rxd);
|
|
|
|
if (spi_context_rx_buf_on(ctx)) {
|
|
*ctx->rx_buf = rxd;
|
|
}
|
|
|
|
spi_context_update_rx(ctx, 1, 1);
|
|
} while (spi_context_tx_on(ctx) || spi_context_rx_on(ctx));
|
|
|
|
spi_context_cs_control(ctx, false);
|
|
|
|
done:
|
|
spi_context_release(ctx, err);
|
|
return err;
|
|
}
|
|
|
|
static int spi_cc13xx_cc26xx_release(struct device *dev,
|
|
const struct spi_config *config)
|
|
{
|
|
struct spi_context *ctx = &get_dev_data(dev)->ctx;
|
|
|
|
if (!spi_context_configured(ctx, config)) {
|
|
return -EINVAL;
|
|
}
|
|
|
|
if (SSIBusy(get_dev_config(dev)->base)) {
|
|
return -EBUSY;
|
|
}
|
|
|
|
spi_context_unlock_unconditionally(ctx);
|
|
|
|
return 0;
|
|
}
|
|
|
|
#if defined(CONFIG_SPI_0) || defined(CONFIG_SPI_1)
|
|
static const struct spi_driver_api spi_cc13xx_cc26xx_driver_api = {
|
|
.transceive = spi_cc13xx_cc26xx_transceive,
|
|
.release = spi_cc13xx_cc26xx_release,
|
|
};
|
|
#else
|
|
#warning "No SPI port configured"
|
|
#endif
|
|
|
|
#ifdef CONFIG_SPI_0
|
|
static int spi_cc13xx_cc26xx_init_0(struct device *dev)
|
|
{
|
|
/* Enable SSI0 power domain */
|
|
PRCMPowerDomainOn(PRCM_DOMAIN_SERIAL);
|
|
|
|
/* Enable SSI0 peripherals */
|
|
PRCMPeripheralRunEnable(PRCM_PERIPH_SSI0);
|
|
/* Enable in sleep mode until proper power managment is added */
|
|
PRCMPeripheralSleepEnable(PRCM_PERIPH_SSI0);
|
|
PRCMPeripheralDeepSleepEnable(PRCM_PERIPH_SSI0);
|
|
|
|
/* Load PRCM settings */
|
|
PRCMLoadSet();
|
|
while (!PRCMLoadGet()) {
|
|
continue;
|
|
}
|
|
|
|
/* SSI should not be accessed until power domain is on. */
|
|
while (PRCMPowerDomainStatus(PRCM_DOMAIN_SERIAL) !=
|
|
PRCM_DOMAIN_POWER_ON) {
|
|
continue;
|
|
}
|
|
|
|
spi_context_unlock_unconditionally(&get_dev_data(dev)->ctx);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct spi_cc13xx_cc26xx_config spi_cc13xx_cc26xx_config_0 = {
|
|
.base = DT_TI_CC13XX_CC26XX_SPI_40000000_BASE_ADDRESS,
|
|
.sck_pin = DT_TI_CC13XX_CC26XX_SPI_40000000_SCK_PIN,
|
|
.mosi_pin = DT_TI_CC13XX_CC26XX_SPI_40000000_MOSI_PIN,
|
|
.miso_pin = DT_TI_CC13XX_CC26XX_SPI_40000000_MISO_PIN,
|
|
#ifdef DT_TI_CC13XX_CC26XX_SPI_40000000_CS_PIN
|
|
.cs_pin = DT_TI_CC13XX_CC26XX_SPI_40000000_CS_PIN,
|
|
#else
|
|
.cs_pin = IOID_UNUSED,
|
|
#endif /* DT_INST_0_TI_CC13XX_CC26XX_SPI_CS_PIN */
|
|
};
|
|
|
|
static struct spi_cc13xx_cc26xx_data spi_cc13xx_cc26xx_data_0 = {
|
|
SPI_CONTEXT_INIT_LOCK(spi_cc13xx_cc26xx_data_0, ctx),
|
|
SPI_CONTEXT_INIT_SYNC(spi_cc13xx_cc26xx_data_0, ctx),
|
|
};
|
|
|
|
DEVICE_AND_API_INIT(spi_cc13xx_cc26xx_0, DT_TI_CC13XX_CC26XX_SPI_40000000_LABEL,
|
|
spi_cc13xx_cc26xx_init_0, &spi_cc13xx_cc26xx_data_0,
|
|
&spi_cc13xx_cc26xx_config_0, POST_KERNEL,
|
|
CONFIG_SPI_INIT_PRIORITY, &spi_cc13xx_cc26xx_driver_api);
|
|
#endif /* CONFIG_SPI_0 */
|
|
|
|
#ifdef CONFIG_SPI_1
|
|
static int spi_cc13xx_cc26xx_init_1(struct device *dev)
|
|
{
|
|
/* Enable SSI1 power domain */
|
|
PRCMPowerDomainOn(PRCM_DOMAIN_PERIPH);
|
|
|
|
/* Enable SSI1 peripherals */
|
|
PRCMPeripheralRunEnable(PRCM_PERIPH_SSI1);
|
|
/* Enable in sleep mode until proper power managment is added */
|
|
PRCMPeripheralSleepEnable(PRCM_PERIPH_SSI1);
|
|
PRCMPeripheralDeepSleepEnable(PRCM_PERIPH_SSI1);
|
|
|
|
/* Load PRCM settings */
|
|
PRCMLoadSet();
|
|
while (!PRCMLoadGet()) {
|
|
continue;
|
|
}
|
|
|
|
/* SSI should not be accessed until power domain is on. */
|
|
while (PRCMPowerDomainStatus(PRCM_DOMAIN_PERIPH) !=
|
|
PRCM_DOMAIN_POWER_ON) {
|
|
continue;
|
|
}
|
|
|
|
spi_context_unlock_unconditionally(&get_dev_data(dev)->ctx);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct spi_cc13xx_cc26xx_config spi_cc13xx_cc26xx_config_1 = {
|
|
.base = DT_TI_CC13XX_CC26XX_SPI_40008000_BASE_ADDRESS,
|
|
.sck_pin = DT_TI_CC13XX_CC26XX_SPI_40008000_SCK_PIN,
|
|
.mosi_pin = DT_TI_CC13XX_CC26XX_SPI_40008000_MOSI_PIN,
|
|
.miso_pin = DT_TI_CC13XX_CC26XX_SPI_40008000_MISO_PIN,
|
|
#ifdef DT_TI_CC13XX_CC26XX_SPI_40008000_CS_PIN
|
|
.cs_pin = DT_TI_CC13XX_CC26XX_SPI_40008000_CS_PIN,
|
|
#else
|
|
.cs_pin = IOID_UNUSED,
|
|
#endif /* DT_TI_CC13XX_CC26XX_SPI_1_CS_PIN */
|
|
};
|
|
|
|
static struct spi_cc13xx_cc26xx_data spi_cc13xx_cc26xx_data_1 = {
|
|
SPI_CONTEXT_INIT_LOCK(spi_cc13xx_cc26xx_data_1, ctx),
|
|
SPI_CONTEXT_INIT_SYNC(spi_cc13xx_cc26xx_data_1, ctx),
|
|
};
|
|
|
|
DEVICE_AND_API_INIT(spi_cc13xx_cc26xx_1, DT_TI_CC13XX_CC26XX_SPI_40008000_LABEL,
|
|
spi_cc13xx_cc26xx_init_1, &spi_cc13xx_cc26xx_data_1,
|
|
&spi_cc13xx_cc26xx_config_1, POST_KERNEL,
|
|
CONFIG_SPI_INIT_PRIORITY, &spi_cc13xx_cc26xx_driver_api);
|
|
#endif /* CONFIG_SPI_1 */
|