99 lines
2.4 KiB
YAML
99 lines
2.4 KiB
YAML
# Copyright (c), 2023 Nordic Semiconductor ASA
|
|
# SPDX-License-Identifier: Apache-2.0
|
|
|
|
description: |
|
|
Nordic nPM1300 PMIC
|
|
|
|
The PMIC has two buck converters and two LDOs.
|
|
The regulators need to be defined as child nodes, strictly following the
|
|
BUCK1,2 LDO1..2, node names. For
|
|
example:
|
|
|
|
pmic@6b {
|
|
reg = <0x6b>;
|
|
...
|
|
regulators {
|
|
compatible = "nordic,npm1300-regulator";
|
|
|
|
BUCK1 {
|
|
/* all properties for BUCK1 */
|
|
};
|
|
BUCK2 {
|
|
/* all properties for BUCK2 */
|
|
};
|
|
LDO1 {
|
|
/* all properties for LDO1 */
|
|
};
|
|
LDO2 {
|
|
/* all properties for LDO2 */
|
|
};
|
|
};
|
|
};
|
|
|
|
compatible: "nordic,npm1300-regulator"
|
|
|
|
include: base.yaml
|
|
|
|
properties:
|
|
dvs-gpios:
|
|
type: phandle-array
|
|
description: |
|
|
List of SOC GPIOs connected to PMIC GPIOs.
|
|
Set_dvs_mode will drive these pins as follows:
|
|
DVS mode 1 will enable the first pin
|
|
DVS mode 2 will enable the second pin
|
|
DVS mode 3 will drive the first and second pins
|
|
etc.
|
|
The effect of the mode change is defined by the enable-gpios
|
|
and pwm_gpios fields for each of the regulator blocks.
|
|
|
|
child-binding:
|
|
include:
|
|
- name: regulator.yaml
|
|
property-allowlist:
|
|
- regulator-always-on
|
|
- regulator-boot-on
|
|
- regulator-boot-off
|
|
- regulator-min-microvolt
|
|
- regulator-max-microvolt
|
|
- regulator-init-microvolt
|
|
- regulator-allowed-modes
|
|
- regulator-initial-mode
|
|
- regulator-min-microamp
|
|
- regulator-max-microamp
|
|
- startup-delay-us
|
|
- off-on-delay-us
|
|
|
|
properties:
|
|
retention-microvolt:
|
|
type: int
|
|
description: |
|
|
Retention mode voltage in microvolts.
|
|
|
|
enable-gpios:
|
|
type: phandle-array
|
|
description: |
|
|
Regulator enable controlled by specified regulator GPIO pin.
|
|
When set regulator must be enabled/disabled using set_dvs_mode.
|
|
|
|
pwm-gpios:
|
|
type: phandle-array
|
|
description: |
|
|
Regulator enable controlled by specified regulator GPIO pin.
|
|
When set regulator must be enabled/disabled using set_dvs_mode.
|
|
|
|
retention-gpios:
|
|
type: phandle-array
|
|
description: |
|
|
Retention mode controlled by specified regulator GPIO pin.
|
|
|
|
soft-start-microamp:
|
|
type: int
|
|
enum:
|
|
- 10000
|
|
- 20000
|
|
- 35000
|
|
- 50000
|
|
description: |
|
|
Soft start current limit in microamps.
|