392 lines
11 KiB
C
392 lines
11 KiB
C
/*
|
|
* Copyright 2022-2023 NXP
|
|
*
|
|
* SPDX-License-Identifier: Apache-2.0
|
|
*/
|
|
|
|
#define DT_DRV_COMPAT nxp_s32_linflexd
|
|
|
|
#include <soc.h>
|
|
#include <zephyr/irq.h>
|
|
#include <zephyr/drivers/uart.h>
|
|
#include <zephyr/drivers/pinctrl.h>
|
|
|
|
#include <Linflexd_Uart_Ip.h>
|
|
#include <Linflexd_Uart_Ip_Irq.h>
|
|
#include "uart_nxp_s32_linflexd.h"
|
|
|
|
static int uart_nxp_s32_err_check(const struct device *dev)
|
|
{
|
|
const struct uart_nxp_s32_config *config = dev->config;
|
|
Linflexd_Uart_Ip_StatusType status;
|
|
int err = 0;
|
|
|
|
status = Linflexd_Uart_Ip_GetReceiveStatus(config->instance, NULL);
|
|
|
|
if (status == LINFLEXD_UART_IP_STATUS_RX_OVERRUN) {
|
|
err |= UART_ERROR_OVERRUN;
|
|
}
|
|
|
|
if (status == LINFLEXD_UART_IP_STATUS_PARITY_ERROR) {
|
|
err |= UART_ERROR_PARITY;
|
|
}
|
|
|
|
if (status == LINFLEXD_UART_IP_STATUS_FRAMING_ERROR) {
|
|
err |= UART_ERROR_FRAMING;
|
|
}
|
|
|
|
return err;
|
|
}
|
|
|
|
static void uart_nxp_s32_poll_out(const struct device *dev, unsigned char c)
|
|
{
|
|
const struct uart_nxp_s32_config *config = dev->config;
|
|
uint32_t linflexd_ier;
|
|
uint8_t key;
|
|
|
|
key = irq_lock();
|
|
|
|
/* Save enabled Linflexd's interrupts */
|
|
linflexd_ier = sys_read32(POINTER_TO_UINT(&config->base->LINIER));
|
|
|
|
Linflexd_Uart_Ip_SyncSend(config->instance, &c, 1,
|
|
CONFIG_UART_NXP_S32_POLL_OUT_TIMEOUT);
|
|
|
|
/* Restore Linflexd's interrupts */
|
|
sys_write32(linflexd_ier, POINTER_TO_UINT(&config->base->LINIER));
|
|
|
|
irq_unlock(key);
|
|
}
|
|
|
|
static int uart_nxp_s32_poll_in(const struct device *dev, unsigned char *c)
|
|
{
|
|
const struct uart_nxp_s32_config *config = dev->config;
|
|
Linflexd_Uart_Ip_StatusType status;
|
|
uint32_t linflexd_ier;
|
|
int ret;
|
|
|
|
status = LINFLEXD_UART_IP_STATUS_SUCCESS;
|
|
|
|
/* Save enabled Linflexd's interrupts */
|
|
linflexd_ier = sys_read32(POINTER_TO_UINT(&config->base->LINIER));
|
|
|
|
/* Retrieves data with poll method */
|
|
status = Linflexd_Uart_Ip_SyncReceive(config->instance, c, 1,
|
|
CONFIG_UART_NXP_S32_POLL_IN_TIMEOUT);
|
|
|
|
/* Restore Linflexd's interrupts */
|
|
sys_write32(linflexd_ier, POINTER_TO_UINT(&config->base->LINIER));
|
|
|
|
if (status == LINFLEXD_UART_IP_STATUS_SUCCESS) {
|
|
ret = 0;
|
|
} else if (status == LINFLEXD_UART_IP_STATUS_TIMEOUT) {
|
|
ret = -1;
|
|
} else {
|
|
ret = -EBUSY;
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
#ifdef CONFIG_UART_INTERRUPT_DRIVEN
|
|
|
|
static int uart_nxp_s32_fifo_fill(const struct device *dev, const uint8_t *tx_data,
|
|
int size)
|
|
{
|
|
const struct uart_nxp_s32_config *config = dev->config;
|
|
struct uart_nxp_s32_data *data = dev->data;
|
|
struct uart_nxp_s32_int *int_data = &(data->int_data);
|
|
|
|
if (int_data->tx_fifo_busy) {
|
|
return 0;
|
|
}
|
|
|
|
int_data->tx_fifo_busy = true;
|
|
|
|
Linflexd_Uart_Ip_AsyncSend(config->instance, tx_data, 1);
|
|
|
|
return 1;
|
|
}
|
|
|
|
static int uart_nxp_s32_fifo_read(const struct device *dev, uint8_t *rx_data,
|
|
const int size)
|
|
{
|
|
const struct uart_nxp_s32_config *config = dev->config;
|
|
struct uart_nxp_s32_data *data = dev->data;
|
|
struct uart_nxp_s32_int *int_data = &(data->int_data);
|
|
|
|
if (int_data->rx_fifo_busy) {
|
|
return 0;
|
|
}
|
|
|
|
*rx_data = int_data->rx_fifo_data;
|
|
int_data->rx_fifo_busy = true;
|
|
|
|
Linflexd_Uart_Ip_SetRxBuffer(config->instance, &(int_data->rx_fifo_data), 1);
|
|
|
|
return 1;
|
|
}
|
|
|
|
static void uart_nxp_s32_irq_tx_enable(const struct device *dev)
|
|
{
|
|
|
|
struct uart_nxp_s32_data *data = dev->data;
|
|
struct uart_nxp_s32_int *int_data = &(data->int_data);
|
|
uint8_t key;
|
|
|
|
int_data->irq_tx_enable = true;
|
|
|
|
key = irq_lock();
|
|
|
|
/* Callback is called in order to transmit the data */
|
|
if (!int_data->tx_fifo_busy) {
|
|
|
|
if (data->callback) {
|
|
data->callback(dev, data->cb_data);
|
|
}
|
|
}
|
|
|
|
irq_unlock(key);
|
|
}
|
|
|
|
static void uart_nxp_s32_irq_tx_disable(const struct device *dev)
|
|
{
|
|
const struct uart_nxp_s32_config *config = dev->config;
|
|
struct uart_nxp_s32_data *data = dev->data;
|
|
struct uart_nxp_s32_int *int_data = &(data->int_data);
|
|
|
|
int_data->irq_tx_enable = false;
|
|
int_data->tx_fifo_busy = false;
|
|
|
|
Linflexd_Uart_Ip_AbortSendingData(config->instance);
|
|
}
|
|
|
|
static int uart_nxp_s32_irq_tx_ready(const struct device *dev)
|
|
{
|
|
struct uart_nxp_s32_data *data = dev->data;
|
|
struct uart_nxp_s32_int *int_data = &(data->int_data);
|
|
|
|
return !int_data->tx_fifo_busy && int_data->irq_tx_enable;
|
|
}
|
|
|
|
static void uart_nxp_s32_irq_rx_enable(const struct device *dev)
|
|
{
|
|
const struct uart_nxp_s32_config *config = dev->config;
|
|
struct uart_nxp_s32_data *data = dev->data;
|
|
struct uart_nxp_s32_int *int_data = &(data->int_data);
|
|
|
|
int_data->irq_rx_enable = true;
|
|
|
|
Linflexd_Uart_Ip_AsyncReceive(config->instance, &(int_data->rx_fifo_data), 1);
|
|
}
|
|
|
|
static void uart_nxp_s32_irq_rx_disable(const struct device *dev)
|
|
{
|
|
const struct uart_nxp_s32_config *config = dev->config;
|
|
struct uart_nxp_s32_data *data = dev->data;
|
|
struct uart_nxp_s32_int *int_data = &(data->int_data);
|
|
|
|
int_data->irq_rx_enable = false;
|
|
int_data->rx_fifo_busy = false;
|
|
|
|
Linflexd_Uart_Ip_AbortReceivingData(config->instance);
|
|
}
|
|
|
|
static int uart_nxp_s32_irq_rx_ready(const struct device *dev)
|
|
{
|
|
struct uart_nxp_s32_data *data = dev->data;
|
|
struct uart_nxp_s32_int *int_data = &(data->int_data);
|
|
|
|
return !int_data->rx_fifo_busy && int_data->irq_rx_enable;
|
|
}
|
|
|
|
static void uart_nxp_s32_irq_err_enable(const struct device *dev)
|
|
{
|
|
const struct uart_nxp_s32_config *config = dev->config;
|
|
uint32_t linflexd_ier;
|
|
|
|
linflexd_ier = sys_read32(POINTER_TO_UINT(&config->base->LINIER));
|
|
|
|
/* Enable frame error interrupt and buffer overrun error interrupt */
|
|
linflexd_ier |= (LINFLEXD_LINIER_FEIE_MASK | LINFLEXD_LINIER_BOIE_MASK);
|
|
|
|
sys_write32(linflexd_ier, POINTER_TO_UINT(&config->base->LINIER));
|
|
}
|
|
|
|
static void uart_nxp_s32_irq_err_disable(const struct device *dev)
|
|
{
|
|
const struct uart_nxp_s32_config *config = dev->config;
|
|
uint32_t linflexd_ier;
|
|
|
|
linflexd_ier = sys_read32(POINTER_TO_UINT(&config->base->LINIER));
|
|
|
|
/* Disable frame error interrupt and buffer overrun error interrupt */
|
|
linflexd_ier &= ~(LINFLEXD_LINIER_FEIE_MASK | LINFLEXD_LINIER_BOIE_MASK);
|
|
|
|
sys_write32(linflexd_ier, POINTER_TO_UINT(&config->base->LINIER));
|
|
}
|
|
|
|
static int uart_nxp_s32_irq_is_pending(const struct device *dev)
|
|
{
|
|
return (uart_nxp_s32_irq_tx_ready(dev)) || (uart_nxp_s32_irq_rx_ready(dev));
|
|
}
|
|
|
|
static int uart_nxp_s32_irq_update(const struct device *dev)
|
|
{
|
|
return 1;
|
|
}
|
|
|
|
static void uart_nxp_s32_irq_callback_set(const struct device *dev,
|
|
uart_irq_callback_user_data_t cb,
|
|
void *cb_data)
|
|
{
|
|
struct uart_nxp_s32_data *data = dev->data;
|
|
|
|
data->callback = cb;
|
|
data->cb_data = cb_data;
|
|
}
|
|
|
|
void uart_nxp_s32_isr(const struct device *dev)
|
|
{
|
|
const struct uart_nxp_s32_config *config = dev->config;
|
|
|
|
Linflexd_Uart_Ip_IRQHandler(config->instance);
|
|
}
|
|
|
|
static void uart_nxp_s32_event_handler(const uint8 instance,
|
|
Linflexd_Uart_Ip_EventType event,
|
|
void *user_data)
|
|
{
|
|
const struct device *dev = (const struct device *)user_data;
|
|
const struct uart_nxp_s32_config *config = dev->config;
|
|
struct uart_nxp_s32_data *data = dev->data;
|
|
struct uart_nxp_s32_int *int_data = &(data->int_data);
|
|
Linflexd_Uart_Ip_StatusType status;
|
|
|
|
if (event == LINFLEXD_UART_IP_EVENT_END_TRANSFER) {
|
|
/*
|
|
* Check the previous UART transmit has finished
|
|
* because Rx may also trigger this event
|
|
*/
|
|
status = Linflexd_Uart_Ip_GetTransmitStatus(config->instance, NULL);
|
|
if (status != LINFLEXD_UART_IP_STATUS_BUSY) {
|
|
int_data->tx_fifo_busy = false;
|
|
if (data->callback) {
|
|
data->callback(dev, data->cb_data);
|
|
}
|
|
}
|
|
} else if (event == LINFLEXD_UART_IP_EVENT_RX_FULL) {
|
|
int_data->rx_fifo_busy = false;
|
|
if (data->callback) {
|
|
data->callback(dev, data->cb_data);
|
|
}
|
|
} else if (event == LINFLEXD_UART_IP_EVENT_ERROR) {
|
|
if (data->callback) {
|
|
data->callback(dev, data->cb_data);
|
|
}
|
|
} else {
|
|
/* Other events are not used */
|
|
}
|
|
}
|
|
|
|
#endif /* CONFIG_UART_INTERRUPT_DRIVEN */
|
|
|
|
static int uart_nxp_s32_init(const struct device *dev)
|
|
{
|
|
const struct uart_nxp_s32_config *config = dev->config;
|
|
int err;
|
|
|
|
err = pinctrl_apply_state(config->pincfg, PINCTRL_STATE_DEFAULT);
|
|
if (err < 0) {
|
|
return err;
|
|
}
|
|
|
|
Linflexd_Uart_Ip_Init(config->instance, &config->hw_cfg);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct uart_driver_api uart_nxp_s32_driver_api = {
|
|
.poll_in = uart_nxp_s32_poll_in,
|
|
.poll_out = uart_nxp_s32_poll_out,
|
|
.err_check = uart_nxp_s32_err_check,
|
|
|
|
#ifdef CONFIG_UART_INTERRUPT_DRIVEN
|
|
.fifo_fill = uart_nxp_s32_fifo_fill,
|
|
.fifo_read = uart_nxp_s32_fifo_read,
|
|
.irq_tx_enable = uart_nxp_s32_irq_tx_enable,
|
|
.irq_tx_disable = uart_nxp_s32_irq_tx_disable,
|
|
.irq_tx_ready = uart_nxp_s32_irq_tx_ready,
|
|
.irq_rx_enable = uart_nxp_s32_irq_rx_enable,
|
|
.irq_rx_disable = uart_nxp_s32_irq_rx_disable,
|
|
.irq_rx_ready = uart_nxp_s32_irq_rx_ready,
|
|
.irq_err_enable = uart_nxp_s32_irq_err_enable,
|
|
.irq_err_disable = uart_nxp_s32_irq_err_disable,
|
|
.irq_is_pending = uart_nxp_s32_irq_is_pending,
|
|
.irq_update = uart_nxp_s32_irq_update,
|
|
.irq_callback_set = uart_nxp_s32_irq_callback_set,
|
|
#endif /* CONFIG_UART_INTERRUPT_DRIVEN */
|
|
|
|
};
|
|
|
|
#define UART_NXP_S32_HW_INSTANCE_CHECK(i, n) \
|
|
((DT_INST_REG_ADDR(n) == IP_LINFLEX_##i##_BASE) ? i : 0)
|
|
|
|
#define UART_NXP_S32_HW_INSTANCE(n) \
|
|
LISTIFY(__DEBRACKET LINFLEXD_INSTANCE_COUNT, UART_NXP_S32_HW_INSTANCE_CHECK, (|), n)
|
|
|
|
#define UART_NXP_S32_INTERRUPT_DEFINE(n) \
|
|
do { \
|
|
IRQ_CONNECT(DT_INST_IRQN(n), DT_INST_IRQ(n, priority), \
|
|
uart_nxp_s32_isr, DEVICE_DT_INST_GET(n), \
|
|
DT_INST_IRQ(n, flags)); \
|
|
irq_enable(DT_INST_IRQN(n)); \
|
|
} while (0)
|
|
|
|
#define UART_NXP_S32_HW_CONFIG(n) \
|
|
{ \
|
|
.BaudRate = 115200, \
|
|
.BaudRateMantissa = 26U, \
|
|
.BaudRateDivisor = 16U, \
|
|
.BaudRateFractionalDivisor = 1U, \
|
|
.ParityCheck = false, \
|
|
.ParityType = LINFLEXD_UART_IP_PARITY_EVEN, \
|
|
.StopBitsCount = LINFLEXD_UART_IP_ONE_STOP_BIT, \
|
|
.WordLength = LINFLEXD_UART_IP_8_BITS, \
|
|
.TransferType = LINFLEXD_UART_IP_USING_INTERRUPTS, \
|
|
.StateStruct = &Linflexd_Uart_Ip_apStateStructure[n], \
|
|
IF_ENABLED(CONFIG_UART_INTERRUPT_DRIVEN, ( \
|
|
.Callback = uart_nxp_s32_event_handler, \
|
|
.CallbackParam = (void *)DEVICE_DT_INST_GET(n), \
|
|
)) \
|
|
}
|
|
|
|
#define UART_NXP_S32_INIT_DEVICE(n) \
|
|
PINCTRL_DT_INST_DEFINE(n); \
|
|
IF_ENABLED(CONFIG_UART_INTERRUPT_DRIVEN, \
|
|
(static struct uart_nxp_s32_data uart_nxp_s32_data_##n;)) \
|
|
static const struct uart_nxp_s32_config uart_nxp_s32_config_##n = { \
|
|
.instance = UART_NXP_S32_HW_INSTANCE(n), \
|
|
.base = (LINFLEXD_Type *)DT_INST_REG_ADDR(n), \
|
|
.pincfg = PINCTRL_DT_INST_DEV_CONFIG_GET(n), \
|
|
.hw_cfg = UART_NXP_S32_HW_CONFIG(n), \
|
|
}; \
|
|
static int uart_nxp_s32_init_##n(const struct device *dev) \
|
|
{ \
|
|
IF_ENABLED(CONFIG_UART_INTERRUPT_DRIVEN, \
|
|
(UART_NXP_S32_INTERRUPT_DEFINE(n);)) \
|
|
\
|
|
return uart_nxp_s32_init(dev); \
|
|
} \
|
|
DEVICE_DT_INST_DEFINE(n, \
|
|
&uart_nxp_s32_init_##n, \
|
|
NULL, \
|
|
COND_CODE_1(CONFIG_UART_INTERRUPT_DRIVEN, \
|
|
(&uart_nxp_s32_data_##n), (NULL)), \
|
|
&uart_nxp_s32_config_##n, \
|
|
PRE_KERNEL_1, \
|
|
CONFIG_SERIAL_INIT_PRIORITY, \
|
|
&uart_nxp_s32_driver_api);
|
|
|
|
DT_INST_FOREACH_STATUS_OKAY(UART_NXP_S32_INIT_DEVICE)
|