461 lines
12 KiB
C
461 lines
12 KiB
C
/*
|
|
* Copyright (c) 2017, NXP
|
|
* Copyright (c) 2020 PHYTEC Messtechnik GmbH
|
|
*
|
|
* SPDX-License-Identifier: Apache-2.0
|
|
*/
|
|
|
|
#define DT_DRV_COMPAT nxp_kinetis_uart
|
|
|
|
#include <errno.h>
|
|
#include <zephyr/device.h>
|
|
#include <zephyr/drivers/uart.h>
|
|
#include <zephyr/drivers/clock_control.h>
|
|
#include <zephyr/irq.h>
|
|
#include <fsl_uart.h>
|
|
#include <soc.h>
|
|
#include <zephyr/pm/device.h>
|
|
#include <zephyr/drivers/pinctrl.h>
|
|
|
|
struct uart_mcux_config {
|
|
UART_Type *base;
|
|
const struct device *clock_dev;
|
|
clock_control_subsys_t clock_subsys;
|
|
#ifdef CONFIG_UART_INTERRUPT_DRIVEN
|
|
void (*irq_config_func)(const struct device *dev);
|
|
#endif
|
|
const struct pinctrl_dev_config *pincfg;
|
|
};
|
|
|
|
struct uart_mcux_data {
|
|
struct uart_config uart_cfg;
|
|
#ifdef CONFIG_UART_INTERRUPT_DRIVEN
|
|
uart_irq_callback_user_data_t callback;
|
|
void *cb_data;
|
|
#endif
|
|
};
|
|
|
|
static int uart_mcux_configure(const struct device *dev,
|
|
const struct uart_config *cfg)
|
|
{
|
|
const struct uart_mcux_config *config = dev->config;
|
|
struct uart_mcux_data *data = dev->data;
|
|
uart_config_t uart_config;
|
|
uint32_t clock_freq;
|
|
status_t retval;
|
|
|
|
if (!device_is_ready(config->clock_dev)) {
|
|
return -ENODEV;
|
|
}
|
|
|
|
if (clock_control_get_rate(config->clock_dev, config->clock_subsys,
|
|
&clock_freq)) {
|
|
return -EINVAL;
|
|
}
|
|
|
|
UART_GetDefaultConfig(&uart_config);
|
|
|
|
uart_config.enableTx = true;
|
|
uart_config.enableRx = true;
|
|
uart_config.baudRate_Bps = cfg->baudrate;
|
|
|
|
switch (cfg->stop_bits) {
|
|
case UART_CFG_STOP_BITS_1:
|
|
#if defined(FSL_FEATURE_UART_HAS_STOP_BIT_CONFIG_SUPPORT) && \
|
|
FSL_FEATURE_UART_HAS_STOP_BIT_CONFIG_SUPPORT
|
|
uart_config.stopBitCount = kUART_OneStopBit;
|
|
break;
|
|
case UART_CFG_STOP_BITS_2:
|
|
uart_config.stopBitCount = kUART_TwoStopBit;
|
|
#endif
|
|
break;
|
|
default:
|
|
return -ENOTSUP;
|
|
}
|
|
|
|
switch (cfg->flow_ctrl) {
|
|
case UART_CFG_FLOW_CTRL_NONE:
|
|
uart_config.enableRxRTS = false;
|
|
uart_config.enableTxCTS = false;
|
|
break;
|
|
case UART_CFG_FLOW_CTRL_RTS_CTS:
|
|
uart_config.enableRxRTS = true;
|
|
uart_config.enableTxCTS = true;
|
|
break;
|
|
default:
|
|
return -ENOTSUP;
|
|
}
|
|
|
|
switch (cfg->parity) {
|
|
case UART_CFG_PARITY_NONE:
|
|
uart_config.parityMode = kUART_ParityDisabled;
|
|
break;
|
|
case UART_CFG_PARITY_EVEN:
|
|
uart_config.parityMode = kUART_ParityEven;
|
|
break;
|
|
case UART_CFG_PARITY_ODD:
|
|
uart_config.parityMode = kUART_ParityOdd;
|
|
break;
|
|
default:
|
|
return -ENOTSUP;
|
|
}
|
|
|
|
retval = UART_Init(config->base, &uart_config, clock_freq);
|
|
if (retval != kStatus_Success) {
|
|
return -EINVAL;
|
|
}
|
|
|
|
data->uart_cfg = *cfg;
|
|
|
|
return 0;
|
|
}
|
|
|
|
#ifdef CONFIG_UART_USE_RUNTIME_CONFIGURE
|
|
static int uart_mcux_config_get(const struct device *dev,
|
|
struct uart_config *cfg)
|
|
{
|
|
struct uart_mcux_data *data = dev->data;
|
|
|
|
*cfg = data->uart_cfg;
|
|
|
|
return 0;
|
|
}
|
|
#endif /* CONFIG_UART_USE_RUNTIME_CONFIGURE */
|
|
|
|
static int uart_mcux_poll_in(const struct device *dev, unsigned char *c)
|
|
{
|
|
const struct uart_mcux_config *config = dev->config;
|
|
uint32_t flags = UART_GetStatusFlags(config->base);
|
|
int ret = -1;
|
|
|
|
if (flags & kUART_RxDataRegFullFlag) {
|
|
*c = UART_ReadByte(config->base);
|
|
ret = 0;
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
static void uart_mcux_poll_out(const struct device *dev, unsigned char c)
|
|
{
|
|
const struct uart_mcux_config *config = dev->config;
|
|
|
|
while (!(UART_GetStatusFlags(config->base) & kUART_TxDataRegEmptyFlag)) {
|
|
}
|
|
|
|
UART_WriteByte(config->base, c);
|
|
}
|
|
|
|
static int uart_mcux_err_check(const struct device *dev)
|
|
{
|
|
const struct uart_mcux_config *config = dev->config;
|
|
uint32_t flags = UART_GetStatusFlags(config->base);
|
|
int err = 0;
|
|
|
|
if (flags & kUART_RxOverrunFlag) {
|
|
err |= UART_ERROR_OVERRUN;
|
|
}
|
|
|
|
if (flags & kUART_ParityErrorFlag) {
|
|
err |= UART_ERROR_PARITY;
|
|
}
|
|
|
|
if (flags & kUART_FramingErrorFlag) {
|
|
err |= UART_ERROR_FRAMING;
|
|
}
|
|
|
|
UART_ClearStatusFlags(config->base, kUART_RxOverrunFlag |
|
|
kUART_ParityErrorFlag |
|
|
kUART_FramingErrorFlag);
|
|
|
|
return err;
|
|
}
|
|
|
|
#ifdef CONFIG_UART_INTERRUPT_DRIVEN
|
|
static int uart_mcux_fifo_fill(const struct device *dev,
|
|
const uint8_t *tx_data,
|
|
int len)
|
|
{
|
|
const struct uart_mcux_config *config = dev->config;
|
|
uint8_t num_tx = 0U;
|
|
|
|
while ((len - num_tx > 0) &&
|
|
(UART_GetStatusFlags(config->base) & kUART_TxDataRegEmptyFlag)) {
|
|
|
|
UART_WriteByte(config->base, tx_data[num_tx++]);
|
|
}
|
|
|
|
return num_tx;
|
|
}
|
|
|
|
static int uart_mcux_fifo_read(const struct device *dev, uint8_t *rx_data,
|
|
const int len)
|
|
{
|
|
const struct uart_mcux_config *config = dev->config;
|
|
uint8_t num_rx = 0U;
|
|
|
|
while ((len - num_rx > 0) &&
|
|
(UART_GetStatusFlags(config->base) & kUART_RxDataRegFullFlag)) {
|
|
|
|
rx_data[num_rx++] = UART_ReadByte(config->base);
|
|
}
|
|
|
|
return num_rx;
|
|
}
|
|
|
|
static void uart_mcux_irq_tx_enable(const struct device *dev)
|
|
{
|
|
const struct uart_mcux_config *config = dev->config;
|
|
uint32_t mask = kUART_TxDataRegEmptyInterruptEnable;
|
|
pm_device_busy_set(dev);
|
|
UART_EnableInterrupts(config->base, mask);
|
|
}
|
|
|
|
static void uart_mcux_irq_tx_disable(const struct device *dev)
|
|
{
|
|
const struct uart_mcux_config *config = dev->config;
|
|
uint32_t mask = kUART_TxDataRegEmptyInterruptEnable;
|
|
pm_device_busy_clear(dev);
|
|
UART_DisableInterrupts(config->base, mask);
|
|
}
|
|
|
|
static int uart_mcux_irq_tx_complete(const struct device *dev)
|
|
{
|
|
const struct uart_mcux_config *config = dev->config;
|
|
uint32_t flags = UART_GetStatusFlags(config->base);
|
|
|
|
return (flags & kUART_TransmissionCompleteFlag) != 0U;
|
|
}
|
|
|
|
static int uart_mcux_irq_tx_ready(const struct device *dev)
|
|
{
|
|
const struct uart_mcux_config *config = dev->config;
|
|
uint32_t mask = kUART_TxDataRegEmptyInterruptEnable;
|
|
uint32_t flags = UART_GetStatusFlags(config->base);
|
|
|
|
return (UART_GetEnabledInterrupts(config->base) & mask)
|
|
&& (flags & kUART_TxDataRegEmptyFlag);
|
|
}
|
|
|
|
static void uart_mcux_irq_rx_enable(const struct device *dev)
|
|
{
|
|
const struct uart_mcux_config *config = dev->config;
|
|
uint32_t mask = kUART_RxDataRegFullInterruptEnable;
|
|
|
|
UART_EnableInterrupts(config->base, mask);
|
|
}
|
|
|
|
static void uart_mcux_irq_rx_disable(const struct device *dev)
|
|
{
|
|
const struct uart_mcux_config *config = dev->config;
|
|
uint32_t mask = kUART_RxDataRegFullInterruptEnable;
|
|
|
|
UART_DisableInterrupts(config->base, mask);
|
|
}
|
|
|
|
static int uart_mcux_irq_rx_full(const struct device *dev)
|
|
{
|
|
const struct uart_mcux_config *config = dev->config;
|
|
uint32_t flags = UART_GetStatusFlags(config->base);
|
|
|
|
return (flags & kUART_RxDataRegFullFlag) != 0U;
|
|
}
|
|
|
|
static int uart_mcux_irq_rx_pending(const struct device *dev)
|
|
{
|
|
const struct uart_mcux_config *config = dev->config;
|
|
uint32_t mask = kUART_RxDataRegFullInterruptEnable;
|
|
|
|
return (UART_GetEnabledInterrupts(config->base) & mask)
|
|
&& uart_mcux_irq_rx_full(dev);
|
|
}
|
|
|
|
static void uart_mcux_irq_err_enable(const struct device *dev)
|
|
{
|
|
const struct uart_mcux_config *config = dev->config;
|
|
uint32_t mask = kUART_NoiseErrorInterruptEnable |
|
|
kUART_FramingErrorInterruptEnable |
|
|
kUART_ParityErrorInterruptEnable;
|
|
|
|
UART_EnableInterrupts(config->base, mask);
|
|
}
|
|
|
|
static void uart_mcux_irq_err_disable(const struct device *dev)
|
|
{
|
|
const struct uart_mcux_config *config = dev->config;
|
|
uint32_t mask = kUART_NoiseErrorInterruptEnable |
|
|
kUART_FramingErrorInterruptEnable |
|
|
kUART_ParityErrorInterruptEnable;
|
|
|
|
UART_DisableInterrupts(config->base, mask);
|
|
}
|
|
|
|
static int uart_mcux_irq_is_pending(const struct device *dev)
|
|
{
|
|
return uart_mcux_irq_tx_ready(dev) || uart_mcux_irq_rx_pending(dev);
|
|
}
|
|
|
|
static int uart_mcux_irq_update(const struct device *dev)
|
|
{
|
|
return 1;
|
|
}
|
|
|
|
static void uart_mcux_irq_callback_set(const struct device *dev,
|
|
uart_irq_callback_user_data_t cb,
|
|
void *cb_data)
|
|
{
|
|
struct uart_mcux_data *data = dev->data;
|
|
|
|
data->callback = cb;
|
|
data->cb_data = cb_data;
|
|
}
|
|
|
|
static void uart_mcux_isr(const struct device *dev)
|
|
{
|
|
struct uart_mcux_data *data = dev->data;
|
|
if (data->callback) {
|
|
data->callback(dev, data->cb_data);
|
|
}
|
|
}
|
|
#endif /* CONFIG_UART_INTERRUPT_DRIVEN */
|
|
|
|
static int uart_mcux_init(const struct device *dev)
|
|
{
|
|
const struct uart_mcux_config *config = dev->config;
|
|
struct uart_mcux_data *data = dev->data;
|
|
int err;
|
|
|
|
err = uart_mcux_configure(dev, &data->uart_cfg);
|
|
if (err != 0) {
|
|
return err;
|
|
}
|
|
|
|
err = pinctrl_apply_state(config->pincfg, PINCTRL_STATE_DEFAULT);
|
|
if (err != 0) {
|
|
return err;
|
|
}
|
|
|
|
#ifdef CONFIG_UART_INTERRUPT_DRIVEN
|
|
config->irq_config_func(dev);
|
|
#endif
|
|
|
|
return 0;
|
|
}
|
|
|
|
#ifdef CONFIG_PM_DEVICE
|
|
static int uart_mcux_pm_action(const struct device *dev, enum pm_device_action action)
|
|
{
|
|
const struct uart_mcux_config *config = dev->config;
|
|
|
|
switch (action) {
|
|
case PM_DEVICE_ACTION_RESUME:
|
|
clock_control_on(config->clock_dev, config->clock_subsys);
|
|
break;
|
|
case PM_DEVICE_ACTION_SUSPEND:
|
|
clock_control_off(config->clock_dev, config->clock_subsys);
|
|
break;
|
|
case PM_DEVICE_ACTION_TURN_OFF:
|
|
return 0;
|
|
case PM_DEVICE_ACTION_TURN_ON:
|
|
return 0;
|
|
default:
|
|
return -ENOTSUP;
|
|
}
|
|
return 0;
|
|
}
|
|
#endif /*CONFIG_PM_DEVICE*/
|
|
|
|
static const struct uart_driver_api uart_mcux_driver_api = {
|
|
.poll_in = uart_mcux_poll_in,
|
|
.poll_out = uart_mcux_poll_out,
|
|
.err_check = uart_mcux_err_check,
|
|
#ifdef CONFIG_UART_USE_RUNTIME_CONFIGURE
|
|
.configure = uart_mcux_configure,
|
|
.config_get = uart_mcux_config_get,
|
|
#endif
|
|
#ifdef CONFIG_UART_INTERRUPT_DRIVEN
|
|
.fifo_fill = uart_mcux_fifo_fill,
|
|
.fifo_read = uart_mcux_fifo_read,
|
|
.irq_tx_enable = uart_mcux_irq_tx_enable,
|
|
.irq_tx_disable = uart_mcux_irq_tx_disable,
|
|
.irq_tx_complete = uart_mcux_irq_tx_complete,
|
|
.irq_tx_ready = uart_mcux_irq_tx_ready,
|
|
.irq_rx_enable = uart_mcux_irq_rx_enable,
|
|
.irq_rx_disable = uart_mcux_irq_rx_disable,
|
|
.irq_rx_ready = uart_mcux_irq_rx_full,
|
|
.irq_err_enable = uart_mcux_irq_err_enable,
|
|
.irq_err_disable = uart_mcux_irq_err_disable,
|
|
.irq_is_pending = uart_mcux_irq_is_pending,
|
|
.irq_update = uart_mcux_irq_update,
|
|
.irq_callback_set = uart_mcux_irq_callback_set,
|
|
#endif
|
|
};
|
|
|
|
#define UART_MCUX_DECLARE_CFG(n, IRQ_FUNC_INIT) \
|
|
static const struct uart_mcux_config uart_mcux_##n##_config = { \
|
|
.base = (UART_Type *)DT_INST_REG_ADDR(n), \
|
|
.clock_dev = DEVICE_DT_GET(DT_INST_CLOCKS_CTLR(n)), \
|
|
.clock_subsys = (clock_control_subsys_t)DT_INST_CLOCKS_CELL(n, name),\
|
|
.pincfg = PINCTRL_DT_INST_DEV_CONFIG_GET(n), \
|
|
IRQ_FUNC_INIT \
|
|
}
|
|
|
|
#ifdef CONFIG_UART_INTERRUPT_DRIVEN
|
|
#define UART_MCUX_CONFIG_FUNC(n) \
|
|
static void uart_mcux_config_func_##n(const struct device *dev) \
|
|
{ \
|
|
IRQ_CONNECT(DT_INST_IRQ_BY_NAME(n, status, irq), \
|
|
DT_INST_IRQ_BY_NAME(n, status, priority), \
|
|
uart_mcux_isr, DEVICE_DT_INST_GET(n), 0); \
|
|
\
|
|
irq_enable(DT_INST_IRQ_BY_NAME(n, status, irq)); \
|
|
\
|
|
IRQ_CONNECT(DT_INST_IRQ_BY_NAME(n, error, irq), \
|
|
DT_INST_IRQ_BY_NAME(n, error, priority), \
|
|
uart_mcux_isr, DEVICE_DT_INST_GET(n), 0); \
|
|
\
|
|
irq_enable(DT_INST_IRQ_BY_NAME(n, error, irq)); \
|
|
}
|
|
#define UART_MCUX_IRQ_CFG_FUNC_INIT(n) \
|
|
.irq_config_func = uart_mcux_config_func_##n
|
|
#define UART_MCUX_INIT_CFG(n) \
|
|
UART_MCUX_DECLARE_CFG(n, UART_MCUX_IRQ_CFG_FUNC_INIT(n))
|
|
#else
|
|
#define UART_MCUX_CONFIG_FUNC(n)
|
|
#define UART_MCUX_IRQ_CFG_FUNC_INIT
|
|
#define UART_MCUX_INIT_CFG(n) \
|
|
UART_MCUX_DECLARE_CFG(n, UART_MCUX_IRQ_CFG_FUNC_INIT)
|
|
#endif
|
|
|
|
#define UART_MCUX_INIT(n) \
|
|
PINCTRL_DT_INST_DEFINE(n); \
|
|
\
|
|
static struct uart_mcux_data uart_mcux_##n##_data = { \
|
|
.uart_cfg = { \
|
|
.stop_bits = UART_CFG_STOP_BITS_1, \
|
|
.data_bits = UART_CFG_DATA_BITS_8, \
|
|
.baudrate = DT_INST_PROP(n, current_speed), \
|
|
.parity = UART_CFG_PARITY_NONE, \
|
|
.flow_ctrl = DT_INST_PROP(n, hw_flow_control) ? \
|
|
UART_CFG_FLOW_CTRL_RTS_CTS : UART_CFG_FLOW_CTRL_NONE,\
|
|
}, \
|
|
}; \
|
|
\
|
|
static const struct uart_mcux_config uart_mcux_##n##_config; \
|
|
PM_DEVICE_DT_INST_DEFINE(n, uart_mcux_pm_action);\
|
|
\
|
|
DEVICE_DT_INST_DEFINE(n, \
|
|
&uart_mcux_init, \
|
|
PM_DEVICE_DT_INST_GET(n), \
|
|
&uart_mcux_##n##_data, \
|
|
&uart_mcux_##n##_config, \
|
|
PRE_KERNEL_1, \
|
|
CONFIG_SERIAL_INIT_PRIORITY, \
|
|
&uart_mcux_driver_api); \
|
|
\
|
|
UART_MCUX_CONFIG_FUNC(n) \
|
|
\
|
|
UART_MCUX_INIT_CFG(n);
|
|
|
|
DT_INST_FOREACH_STATUS_OKAY(UART_MCUX_INIT)
|