749 lines
20 KiB
C
749 lines
20 KiB
C
/* disc_access_sdhc.h - header SDHC*/
|
|
|
|
/*
|
|
* Copyright (c) 2019 NXP
|
|
*
|
|
* SPDX-License-Identifier: Apache-2.0
|
|
*/
|
|
#ifndef ZEPHYR_INCLUDE_DISK_DRIVER_SDMMC_H_
|
|
#define ZEPHYR_INCLUDE_DISK_DRIVER_SDMMC_H_
|
|
|
|
#include <drivers/spi.h>
|
|
|
|
#define SDMMC_CLOCK_400KHZ (400000U)
|
|
#define SD_CLOCK_25MHZ (25000000U)
|
|
#define SD_CLOCK_50MHZ (50000000U)
|
|
#define SD_CLOCK_100MHZ (100000000U)
|
|
#define SD_CLOCK_208MHZ (208000000U)
|
|
#define MMC_CLOCK_26MHZ (26000000U)
|
|
#define MMC_CLOCK_52MHZ (52000000U)
|
|
#define MMC_CLOCK_DDR52 (52000000U)
|
|
#define MMC_CLOCK_HS200 (200000000U)
|
|
#define MMC_CLOCK_HS400 (400000000U)
|
|
|
|
/* Command IDs */
|
|
#define SDHC_GO_IDLE_STATE 0
|
|
#define SDHC_ALL_SEND_CID 2
|
|
#define SDHC_SEND_RELATIVE_ADDR 3
|
|
#define SDHC_SWITCH 6
|
|
#define SDHC_SELECT_CARD 7
|
|
#define SDHC_SEND_IF_COND 8
|
|
#define SDHC_SEND_CSD 9
|
|
#define SDHC_SEND_CID 10
|
|
#define SDHC_VOL_SWITCH 11
|
|
#define SDHC_STOP_TRANSMISSION 12
|
|
#define SDHC_SEND_STATUS 13
|
|
#define SDHC_GO_INACTIVE_STATE 15
|
|
#define SDHC_SET_BLOCK_SIZE 16
|
|
#define SDHC_READ_SINGLE_BLOCK 17
|
|
#define SDHC_READ_MULTIPLE_BLOCK 18
|
|
#define SDHC_SEND_TUNING_BLOCK 19
|
|
#define SDHC_SET_BLOCK_COUNT 23
|
|
#define SDHC_WRITE_BLOCK 24
|
|
#define SDHC_WRITE_MULTIPLE_BLOCK 25
|
|
#define SDHC_ERASE_BLOCK_START 32
|
|
#define SDHC_ERASE_BLOCK_END 33
|
|
#define SDHC_ERASE_BLOCK_OPERATION 38
|
|
#define SDHC_APP_CMD 55
|
|
#define SDHC_READ_OCR 58
|
|
#define SDHC_CRC_ON_OFF 59
|
|
|
|
enum sdhc_app_ext_cmd {
|
|
SDHC_APP_SET_BUS_WIDTH = 6,
|
|
SDHC_APP_SEND_STATUS = 13,
|
|
SDHC_APP_SEND_NUM_WRITTEN_BLK = 22,
|
|
SDHC_APP_SET_WRITE_BLK_ERASE_CNT = 23,
|
|
SDHC_APP_SEND_OP_COND = 41,
|
|
SDHC_APP_CLEAR_CARD_DETECT = 42,
|
|
SDHC_APP_SEND_SCR = 51
|
|
};
|
|
|
|
#define SDHC_SEND_OP_COND SDHC_APP_SEND_OP_COND
|
|
|
|
/* R1 response status */
|
|
#define SDHC_R1_IDLE 0x01
|
|
#define SDHC_R1_ERASE_RESET 0x02
|
|
#define SDHC_R1_ILLEGAL_COMMAND 0x04
|
|
#define SDHC_R1_COM_CRC 0x08
|
|
#define SDHC_R1_ERASE_SEQ 0x10
|
|
#define SDHC_R1_ADDRESS 0x20
|
|
#define SDHC_R1_PARAMETER 0x40
|
|
|
|
#define SDHC_CMD_SIZE 6
|
|
#define SDHC_CMD_BODY_SIZE (SDHC_CMD_SIZE - 1)
|
|
#define SDHC_CRC16_SIZE 2
|
|
|
|
/* Command flags */
|
|
#define SDHC_START 0x80
|
|
#define SDHC_TX 0x40
|
|
|
|
/* Fields in various card registers */
|
|
#define SDHC_HCS (1 << 30)
|
|
#define SDHC_CCS (1 << 30)
|
|
#define SDHC_BUSY (1 << 31)
|
|
#define SDHC_VHS_MASK (0x0F << 8)
|
|
#define SDHC_VHS_3V3 (1 << 8)
|
|
#define SDHC_CHECK 0xAA
|
|
#define SDHC_CSD_SIZE 16
|
|
#define SDHC_CSD_V1 0
|
|
#define SDHC_CSD_V2 1
|
|
|
|
/* Data block tokens */
|
|
#define SDHC_TOKEN_SINGLE 0xFE
|
|
#define SDHC_TOKEN_MULTI_WRITE 0xFC
|
|
#define SDHC_TOKEN_STOP_TRAN 0xFD
|
|
|
|
/* Data block responses */
|
|
#define SDHC_RESPONSE_ACCEPTED 0x05
|
|
#define SDHC_RESPONSE_CRC_ERR 0x0B
|
|
#define SDHC_RESPONSE_WRITE_ERR 0x0E
|
|
|
|
#define SDHC_MIN_TRIES 20
|
|
#define SDHC_RETRY_DELAY 20
|
|
/* Time to wait for the card to initialise */
|
|
#define SDHC_INIT_TIMEOUT 5000
|
|
/* Time to wait for the card to respond or come ready */
|
|
#define SDHC_READY_TIMEOUT 500
|
|
|
|
enum sdhc_rsp_type {
|
|
SDHC_RSP_TYPE_NONE = 0U,
|
|
SDHC_RSP_TYPE_R1 = 1U,
|
|
SDHC_RSP_TYPE_R1b = 2U,
|
|
SDHC_RSP_TYPE_R2 = 3U,
|
|
SDHC_RSP_TYPE_R3 = 4U,
|
|
SDHC_RSP_TYPE_R4 = 5U,
|
|
SDHC_RSP_TYPE_R5 = 6U,
|
|
SDHC_RSP_TYPE_R5b = 7U,
|
|
SDHC_RSP_TYPE_R6 = 8U,
|
|
SDHC_RSP_TYPE_R7 = 9U,
|
|
};
|
|
|
|
enum sdhc_bus_width {
|
|
SDHC_BUS_WIDTH1BIT = 0U,
|
|
SDHC_BUS_WIDTH4BIT = 1U,
|
|
};
|
|
|
|
enum sdhc_flag {
|
|
SDHC_HIGH_CAPACITY_FLAG = (1U << 1U),
|
|
SDHC_4BITS_WIDTH = (1U << 2U),
|
|
SDHC_SDHC_FLAG = (1U << 3U),
|
|
SDHC_SDXC_FLAG = (1U << 4U),
|
|
SDHC_1800MV_FLAG = (1U << 5U),
|
|
SDHC_CMD23_FLAG = (1U << 6U),
|
|
SDHC_SPEED_CLASS_CONTROL_FLAG = (1U << 7U),
|
|
};
|
|
|
|
enum sdhc_r1_error_flag {
|
|
SDHC_R1OUTOF_RANGE_ERR = (1U << 31U),
|
|
SDHC_R1ADDRESS_ERR = (1U << 30U),
|
|
SDHC_R1BLK_LEN_ERR = (1U << 29U),
|
|
SDHC_R1ERASE_SEQ_ERR = (1U << 28U),
|
|
SDHC_R1ERASE_PARAMETER_ERR = (1U << 27U),
|
|
SDHC_R1WRITE_PROTECTION_ERR = (1U << 26U),
|
|
SDHC_R1CARD_LOCKED_ERR = (1U << 25U),
|
|
SDHC_R1LOCK_UNLOCK_ERR = (1U << 24U),
|
|
SDHC_R1CMD_CRC_ERR = (1U << 23U),
|
|
SDHC_R1ILLEGAL_CMD_ERR = (1U << 22U),
|
|
SDHC_R1ECC_ERR = (1U << 21U),
|
|
SDHC_R1CARD_CONTROL_ERR = (1U << 20U),
|
|
SDHC_R1ERR = (1U << 19U),
|
|
SDHC_R1CID_CSD_OVERWRITE_ERR = (1U << 16U),
|
|
SDHC_R1WRITE_PROTECTION_ERASE_SKIP = (1U << 15U),
|
|
SDHC_R1CARD_ECC_DISABLED = (1U << 14U),
|
|
SDHC_R1ERASE_RESET = (1U << 13U),
|
|
SDHC_R1READY_FOR_DATA = (1U << 8U),
|
|
SDHC_R1SWITCH_ERR = (1U << 7U),
|
|
SDHC_R1APP_CMD = (1U << 5U),
|
|
SDHC_R1AUTH_SEQ_ERR = (1U << 3U),
|
|
|
|
SDHC_R1ERR_All_FLAG =
|
|
(SDHC_R1OUTOF_RANGE_ERR |
|
|
SDHC_R1ADDRESS_ERR |
|
|
SDHC_R1BLK_LEN_ERR |
|
|
SDHC_R1ERASE_SEQ_ERR |
|
|
SDHC_R1ERASE_PARAMETER_ERR |
|
|
SDHC_R1WRITE_PROTECTION_ERR |
|
|
SDHC_R1CARD_LOCKED_ERR |
|
|
SDHC_R1LOCK_UNLOCK_ERR |
|
|
SDHC_R1CMD_CRC_ERR |
|
|
SDHC_R1ILLEGAL_CMD_ERR |
|
|
SDHC_R1ECC_ERR |
|
|
SDHC_R1CARD_CONTROL_ERR |
|
|
SDHC_R1ERR |
|
|
SDHC_R1CID_CSD_OVERWRITE_ERR |
|
|
SDHC_R1AUTH_SEQ_ERR),
|
|
|
|
SDHC_R1ERR_NONE = 0,
|
|
};
|
|
|
|
#define SD_R1_CURRENT_STATE(x) (((x)&0x00001E00U) >> 9U)
|
|
|
|
enum sd_r1_current_state {
|
|
SDMMC_R1_IDLE = 0U,
|
|
SDMMC_R1_READY = 1U,
|
|
SDMMC_R1_IDENTIFY = 2U,
|
|
SDMMC_R1_STANDBY = 3U,
|
|
SDMMC_R1_TRANSFER = 4U,
|
|
SDMMC_R1_SEND_DATA = 5U,
|
|
SDMMC_R1_RECIVE_DATA = 6U,
|
|
SDMMC_R1_PROGRAM = 7U,
|
|
SDMMC_R1_DISCONNECT = 8U,
|
|
};
|
|
|
|
enum sd_ocr_flag {
|
|
SD_OCR_PWR_BUSY_FLAG = (1U << 31U),
|
|
/*!< Power up busy status */
|
|
SD_OCR_HOST_CAP_FLAG = (1U << 30U),
|
|
/*!< Card capacity status */
|
|
SD_OCR_CARD_CAP_FLAG = SD_OCR_HOST_CAP_FLAG,
|
|
/*!< Card capacity status */
|
|
SD_OCR_SWITCH_18_REQ_FLAG = (1U << 24U),
|
|
/*!< Switch to 1.8V request */
|
|
SD_OCR_SWITCH_18_ACCEPT_FLAG = SD_OCR_SWITCH_18_REQ_FLAG,
|
|
/*!< Switch to 1.8V accepted */
|
|
SD_OCR_VDD27_28FLAG = (1U << 15U),
|
|
/*!< VDD 2.7-2.8 */
|
|
SD_OCR_VDD28_29FLAG = (1U << 16U),
|
|
/*!< VDD 2.8-2.9 */
|
|
SD_OCR_VDD29_30FLAG = (1U << 17U),
|
|
/*!< VDD 2.9-3.0 */
|
|
SD_OCR_VDD30_31FLAG = (1U << 18U),
|
|
/*!< VDD 2.9-3.0 */
|
|
SD_OCR_VDD31_32FLAG = (1U << 19U),
|
|
/*!< VDD 3.0-3.1 */
|
|
SD_OCR_VDD32_33FLAG = (1U << 20U),
|
|
/*!< VDD 3.1-3.2 */
|
|
SD_OCR_VDD33_34FLAG = (1U << 21U),
|
|
/*!< VDD 3.2-3.3 */
|
|
SD_OCR_VDD34_35FLAG = (1U << 22U),
|
|
/*!< VDD 3.3-3.4 */
|
|
SD_OCR_VDD35_36FLAG = (1U << 23U),
|
|
/*!< VDD 3.4-3.5 */
|
|
};
|
|
|
|
#define SD_PRODUCT_NAME_BYTES (5U)
|
|
|
|
struct sd_cid {
|
|
uint8_t manufacturer;
|
|
/*!< Manufacturer ID [127:120] */
|
|
uint16_t application;
|
|
/*!< OEM/Application ID [119:104] */
|
|
uint8_t name[SD_PRODUCT_NAME_BYTES];
|
|
/*!< Product name [103:64] */
|
|
uint8_t version;
|
|
/*!< Product revision [63:56] */
|
|
uint32_t ser_num;
|
|
/*!< Product serial number [55:24] */
|
|
uint16_t date;
|
|
/*!< Manufacturing date [19:8] */
|
|
};
|
|
|
|
struct sd_csd {
|
|
uint8_t csd_structure;
|
|
/*!< CSD structure [127:126] */
|
|
uint8_t read_time1;
|
|
/*!< Data read access-time-1 [119:112] */
|
|
uint8_t read_time2;
|
|
/*!< Data read access-time-2 in clock cycles (NSAC*100) [111:104] */
|
|
uint8_t xfer_rate;
|
|
/*!< Maximum data transfer rate [103:96] */
|
|
uint16_t cmd_class;
|
|
/*!< Card command classes [95:84] */
|
|
uint8_t read_blk_len;
|
|
/*!< Maximum read data block length [83:80] */
|
|
uint16_t flags;
|
|
/*!< Flags in _sd_csd_flag */
|
|
uint32_t device_size;
|
|
/*!< Device size [73:62] */
|
|
uint8_t read_current_min;
|
|
/*!< Maximum read current at VDD min [61:59] */
|
|
uint8_t read_current_max;
|
|
/*!< Maximum read current at VDD max [58:56] */
|
|
uint8_t write_current_min;
|
|
/*!< Maximum write current at VDD min [55:53] */
|
|
uint8_t write_current_max;
|
|
/*!< Maximum write current at VDD max [52:50] */
|
|
uint8_t dev_size_mul;
|
|
/*!< Device size multiplier [49:47] */
|
|
|
|
uint8_t erase_size;
|
|
/*!< Erase sector size [45:39] */
|
|
uint8_t write_prtect_size;
|
|
/*!< Write protect group size [38:32] */
|
|
uint8_t write_speed_factor;
|
|
/*!< Write speed factor [28:26] */
|
|
uint8_t write_blk_len;
|
|
/*!< Maximum write data block length [25:22] */
|
|
uint8_t file_fmt;
|
|
/*!< File format [11:10] */
|
|
};
|
|
|
|
struct sd_scr {
|
|
uint8_t scr_structure;
|
|
/*!< SCR Structure [63:60] */
|
|
uint8_t sd_spec;
|
|
/*!< SD memory card specification version [59:56] */
|
|
uint16_t flags;
|
|
/*!< SCR flags in _sd_scr_flag */
|
|
uint8_t sd_sec;
|
|
/*!< Security specification supported [54:52] */
|
|
uint8_t sd_width;
|
|
/*!< Data bus widths supported [51:48] */
|
|
uint8_t sd_ext_sec;
|
|
/*!< Extended security support [46:43] */
|
|
uint8_t cmd_support;
|
|
/*!< Command support bits [33:32] 33-support CMD23, 32-support cmd20*/
|
|
uint32_t rsvd;
|
|
/*!< reserved for manufacturer usage [31:0] */
|
|
};
|
|
|
|
enum sd_timing_mode {
|
|
SD_TIMING_SDR12_DFT_MODE = 0U,
|
|
/*!< Identification mode & SDR12 */
|
|
SD_TIMING_SDR25_HIGH_SPEED_MODE = 1U,
|
|
/*!< High speed mode & SDR25 */
|
|
SD_TIMING_SDR50_MODE = 2U,
|
|
/*!< SDR50 mode*/
|
|
SD_TIMING_SDR104_MODE = 3U,
|
|
/*!< SDR104 mode */
|
|
SD_TIMING_DDR50_MODE = 4U,
|
|
/*!< DDR50 mode */
|
|
};
|
|
|
|
/*! @brief SD card current limit */
|
|
enum sd_max_current {
|
|
SD_MAX_CURRENT_200MA = 0U,
|
|
/*!< default current limit */
|
|
SD_MAX_CURRENT_400MA = 1U,
|
|
/*!< current limit to 400MA */
|
|
SD_MAX_CURRENT_600MA = 2U,
|
|
/*!< current limit to 600MA */
|
|
SD_MAX_CURRENT_800MA = 3U,
|
|
/*!< current limit to 800MA */
|
|
};
|
|
|
|
enum sd_voltage {
|
|
SD_VOL_NONE = 0U,
|
|
/*!< indicate current voltage setting is not set by user*/
|
|
SD_VOL_3_3_V = 1U,
|
|
/*!< card operation voltage around 3.3v */
|
|
SD_VOL_3_0_V = 2U,
|
|
/*!< card operation voltage around 3.0v */
|
|
SD_VOL_1_8_V = 3U,
|
|
/*!< card operation voltage around 1.8v */
|
|
};
|
|
|
|
#define SDMMC_DEFAULT_BLOCK_SIZE (512U)
|
|
|
|
struct sd_data_op {
|
|
uint32_t start_block;
|
|
uint32_t block_size;
|
|
uint32_t block_count;
|
|
uint32_t *buf;
|
|
};
|
|
|
|
enum sd_switch_arg {
|
|
SD_SWITCH_CHECK = 0U,
|
|
/*!< SD switch mode 0: check function */
|
|
SD_SWITCH_SET = 1U,
|
|
/*!< SD switch mode 1: set function */
|
|
};
|
|
|
|
enum sd_group_num {
|
|
SD_GRP_TIMING_MODE = 0U,
|
|
/*!< access mode group*/
|
|
SD_GRP_CMD_SYS_MODE = 1U,
|
|
/*!< command system group*/
|
|
SD_GRP_DRIVER_STRENGTH_MODE = 2U,
|
|
/*!< driver strength group*/
|
|
SD_GRP_CURRENT_LIMIT_MODE = 3U,
|
|
/*!< current limit group*/
|
|
};
|
|
|
|
enum sd_driver_strength {
|
|
SD_DRV_STRENGTH_TYPEB = 0U,
|
|
/*!< default driver strength*/
|
|
SD_DRV_STRENGTH_TYPEA = 1U,
|
|
/*!< driver strength TYPE A */
|
|
SD_DRV_STRENGTH_TYPEC = 2U,
|
|
/*!< driver strength TYPE C */
|
|
SD_DRV_STRENGTH_TYPED = 3U,
|
|
/*!< driver strength TYPE D */
|
|
};
|
|
|
|
enum sd_csd_flag {
|
|
SD_CSD_READ_BLK_PARTIAL_FLAG = (1U << 0U),
|
|
/*!< Partial blocks for read allowed [79:79] */
|
|
SD_CSD_WRITE_BLK_MISALIGN_FLAG = (1U << 1U),
|
|
/*!< Write block misalignment [78:78] */
|
|
SD_CSD_READ_BLK_MISALIGN_FLAG = (1U << 2U),
|
|
/*!< Read block misalignment [77:77] */
|
|
SD_CSD_DSR_IMPLEMENTED_FLAG = (1U << 3U),
|
|
/*!< DSR implemented [76:76] */
|
|
SD_CSD_ERASE_BLK_EN_FLAG = (1U << 4U),
|
|
/*!< Erase single block enabled [46:46] */
|
|
SD_CSD_WRITE_PROTECT_GRP_EN_FLAG = (1U << 5U),
|
|
/*!< Write protect group enabled [31:31] */
|
|
SD_CSD_WRITE_BLK_PARTIAL_FLAG = (1U << 6U),
|
|
/*!< Partial blocks for write allowed [21:21] */
|
|
SD_CSD_FILE_FMT_GRP_FLAG = (1U << 7U),
|
|
/*!< File format group [15:15] */
|
|
SD_CSD_COPY_FLAG = (1U << 8U),
|
|
/*!< Copy flag [14:14] */
|
|
SD_CSD_PERMANENT_WRITE_PROTECT_FLAG = (1U << 9U),
|
|
/*!< Permanent write protection [13:13] */
|
|
SD_CSD_TMP_WRITE_PROTECT_FLAG = (1U << 10U),
|
|
/*!< Temporary write protection [12:12] */
|
|
};
|
|
|
|
enum sd_scr_flag {
|
|
SD_SCR_DATA_STATUS_AFTER_ERASE = (1U << 0U),
|
|
/*!< Data status after erases [55:55] */
|
|
SD_SCR_SPEC3 = (1U << 1U),
|
|
/*!< Specification version 3.00 or higher [47:47]*/
|
|
};
|
|
|
|
enum sd_spec_version {
|
|
SD_SPEC_VER1_0 = (1U << 0U),
|
|
/*!< SD card version 1.0-1.01 */
|
|
SD_SPEC_VER1_1 = (1U << 1U),
|
|
/*!< SD card version 1.10 */
|
|
SD_SPEC_VER2_0 = (1U << 2U),
|
|
/*!< SD card version 2.00 */
|
|
SD_SPEC_VER3_0 = (1U << 3U),
|
|
/*!< SD card version 3.0 */
|
|
};
|
|
|
|
enum sd_command_class {
|
|
SD_CMD_CLASS_BASIC = (1U << 0U),
|
|
/*!< Card command class 0 */
|
|
SD_CMD_CLASS_BLOCK_READ = (1U << 2U),
|
|
/*!< Card command class 2 */
|
|
SD_CMD_CLASS_BLOCK_WRITE = (1U << 4U),
|
|
/*!< Card command class 4 */
|
|
SD_CMD_CLASS_ERASE = (1U << 5U),
|
|
/*!< Card command class 5 */
|
|
SD_CMD_CLASS_WRITE_PROTECT = (1U << 6U),
|
|
/*!< Card command class 6 */
|
|
SD_CMD_CLASS_LOCKCARD = (1U << 7U),
|
|
/*!< Card command class 7 */
|
|
SD_CMD_CLASS_APP_SPECIFIC = (1U << 8U),
|
|
/*!< Card command class 8 */
|
|
SD_CMD_CLASS_IO_MODE = (1U << 9U),
|
|
/*!< Card command class 9 */
|
|
SD_CMD_CLASS_SWITCH = (1U << 10U),
|
|
/*!< Card command class 10 */
|
|
};
|
|
|
|
struct sdhc_retry {
|
|
uint32_t end;
|
|
int16_t tries;
|
|
uint16_t sleep;
|
|
};
|
|
|
|
struct sdhc_flag_map {
|
|
uint8_t mask;
|
|
uint8_t err;
|
|
};
|
|
|
|
/* The SD protocol requires sending ones while reading but Zephyr
|
|
* defaults to writing zeros.
|
|
*/
|
|
static const uint8_t sdhc_ones[] = {
|
|
0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
|
|
0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
|
|
0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
|
|
0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
|
|
0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
|
|
0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
|
|
};
|
|
|
|
BUILD_ASSERT(sizeof(sdhc_ones) % SDHC_CSD_SIZE == 0);
|
|
BUILD_ASSERT(SDMMC_DEFAULT_BLOCK_SIZE % sizeof(sdhc_ones) == 0);
|
|
|
|
/* Maps R1 response flags to error codes */
|
|
static const struct sdhc_flag_map sdhc_r1_flags[] = {
|
|
{SDHC_R1_PARAMETER, EFAULT}, {SDHC_R1_ADDRESS, EFAULT},
|
|
{SDHC_R1_ILLEGAL_COMMAND, EINVAL}, {SDHC_R1_COM_CRC, EILSEQ},
|
|
{SDHC_R1_ERASE_SEQ, EIO}, {SDHC_R1_ERASE_RESET, EIO},
|
|
{SDHC_R1_IDLE, ECONNRESET}, {0, 0},
|
|
};
|
|
|
|
/* Maps disk status flags to error codes */
|
|
static const struct sdhc_flag_map sdhc_disk_status_flags[] = {
|
|
{DISK_STATUS_UNINIT, ENODEV},
|
|
{DISK_STATUS_NOMEDIA, ENOENT},
|
|
{DISK_STATUS_WR_PROTECT, EROFS},
|
|
{0, 0},
|
|
};
|
|
|
|
/* Maps data block flags to error codes */
|
|
static const struct sdhc_flag_map sdhc_data_response_flags[] = {
|
|
{SDHC_RESPONSE_WRITE_ERR, EIO},
|
|
{SDHC_RESPONSE_CRC_ERR, EILSEQ},
|
|
{SDHC_RESPONSE_ACCEPTED, 0},
|
|
/* Unrecognised value */
|
|
{0, EPROTO},
|
|
};
|
|
|
|
/* Returns true if an error code is retryable at the disk layer */
|
|
static inline bool sdhc_is_retryable(int err)
|
|
{
|
|
switch (err) {
|
|
case 0:
|
|
return false;
|
|
case -EILSEQ:
|
|
case -EIO:
|
|
case -ETIMEDOUT:
|
|
return true;
|
|
default:
|
|
return false;
|
|
}
|
|
}
|
|
|
|
/* Maps a flag based error code into a Zephyr errno */
|
|
static inline int sdhc_map_flags(const struct sdhc_flag_map *map, int flags)
|
|
{
|
|
if (flags < 0) {
|
|
return flags;
|
|
}
|
|
|
|
for (; map->mask != 0U; map++) {
|
|
if ((flags & map->mask) == map->mask) {
|
|
return -map->err;
|
|
}
|
|
}
|
|
|
|
return -map->err;
|
|
}
|
|
|
|
/* Converts disk status into an error code */
|
|
static inline int sdhc_map_disk_status(int status)
|
|
{
|
|
return sdhc_map_flags(sdhc_disk_status_flags, status);
|
|
}
|
|
|
|
/* Converts the R1 response flags into an error code */
|
|
static inline int sdhc_map_r1_status(int status)
|
|
{
|
|
return sdhc_map_flags(sdhc_r1_flags, status);
|
|
}
|
|
|
|
/* Converts an early stage idle mode R1 code into an error code */
|
|
static inline int sdhc_map_r1_idle_status(int status)
|
|
{
|
|
if (status < 0) {
|
|
return status;
|
|
}
|
|
|
|
if (status == SDHC_R1_IDLE) {
|
|
return 0;
|
|
}
|
|
|
|
return sdhc_map_r1_status(status);
|
|
}
|
|
|
|
/* Converts the data block response flags into an error code */
|
|
static inline int sdhc_map_data_status(int status)
|
|
{
|
|
return sdhc_map_flags(sdhc_data_response_flags, status);
|
|
}
|
|
|
|
/* Initialises a retry helper */
|
|
static inline void sdhc_retry_init(struct sdhc_retry *retry, uint32_t timeout,
|
|
uint16_t sleep)
|
|
{
|
|
retry->end = k_uptime_get_32() + timeout;
|
|
retry->tries = 0;
|
|
retry->sleep = sleep;
|
|
}
|
|
|
|
/* Called at the end of a retry loop. Returns if the minimum try
|
|
* count and timeout has passed. Delays/yields on retry.
|
|
*/
|
|
static inline bool sdhc_retry_ok(struct sdhc_retry *retry)
|
|
{
|
|
int32_t remain = retry->end - k_uptime_get_32();
|
|
|
|
if (retry->tries < SDHC_MIN_TRIES) {
|
|
retry->tries++;
|
|
if (retry->sleep != 0U) {
|
|
k_msleep(retry->sleep);
|
|
}
|
|
|
|
return true;
|
|
}
|
|
|
|
if (remain >= 0) {
|
|
if (retry->sleep > 0) {
|
|
k_msleep(retry->sleep);
|
|
} else {
|
|
k_yield();
|
|
}
|
|
|
|
return true;
|
|
}
|
|
|
|
return false;
|
|
}
|
|
|
|
static inline void sdhc_decode_csd(struct sd_csd *csd,
|
|
uint32_t *raw_csd, uint32_t *blk_cout, uint32_t *blk_size)
|
|
{
|
|
uint32_t tmp_blk_cout, tmp_blk_size;
|
|
|
|
csd->csd_structure = (uint8_t)((raw_csd[3U] &
|
|
0xC0000000U) >> 30U);
|
|
csd->read_time1 = (uint8_t)((raw_csd[3U] &
|
|
0xFF0000U) >> 16U);
|
|
csd->read_time2 = (uint8_t)((raw_csd[3U] &
|
|
0xFF00U) >> 8U);
|
|
csd->xfer_rate = (uint8_t)(raw_csd[3U] &
|
|
0xFFU);
|
|
csd->cmd_class = (uint16_t)((raw_csd[2U] &
|
|
0xFFF00000U) >> 20U);
|
|
csd->read_blk_len = (uint8_t)((raw_csd[2U] &
|
|
0xF0000U) >> 16U);
|
|
if (raw_csd[2U] & 0x8000U)
|
|
csd->flags |= SD_CSD_READ_BLK_PARTIAL_FLAG;
|
|
if (raw_csd[2U] & 0x4000U)
|
|
csd->flags |= SD_CSD_READ_BLK_PARTIAL_FLAG;
|
|
if (raw_csd[2U] & 0x2000U)
|
|
csd->flags |= SD_CSD_READ_BLK_MISALIGN_FLAG;
|
|
if (raw_csd[2U] & 0x1000U)
|
|
csd->flags |= SD_CSD_DSR_IMPLEMENTED_FLAG;
|
|
|
|
switch (csd->csd_structure) {
|
|
case 0:
|
|
csd->device_size = (uint32_t)((raw_csd[2U] &
|
|
0x3FFU) << 2U);
|
|
csd->device_size |= (uint32_t)((raw_csd[1U] &
|
|
0xC0000000U) >> 30U);
|
|
csd->read_current_min = (uint8_t)((raw_csd[1U] &
|
|
0x38000000U) >> 27U);
|
|
csd->read_current_max = (uint8_t)((raw_csd[1U] &
|
|
0x7000000U) >> 24U);
|
|
csd->write_current_min = (uint8_t)((raw_csd[1U] &
|
|
0xE00000U) >> 20U);
|
|
csd->write_current_max = (uint8_t)((raw_csd[1U] &
|
|
0x1C0000U) >> 18U);
|
|
csd->dev_size_mul = (uint8_t)((raw_csd[1U] &
|
|
0x38000U) >> 15U);
|
|
|
|
/* Get card total block count and block size. */
|
|
tmp_blk_cout = ((csd->device_size + 1U) <<
|
|
(csd->dev_size_mul + 2U));
|
|
tmp_blk_size = (1U << (csd->read_blk_len));
|
|
if (tmp_blk_size != SDMMC_DEFAULT_BLOCK_SIZE) {
|
|
tmp_blk_cout = (tmp_blk_cout * tmp_blk_size);
|
|
tmp_blk_size = SDMMC_DEFAULT_BLOCK_SIZE;
|
|
tmp_blk_cout = (tmp_blk_cout / tmp_blk_size);
|
|
}
|
|
if (blk_cout)
|
|
*blk_cout = tmp_blk_cout;
|
|
if (blk_size)
|
|
*blk_size = tmp_blk_size;
|
|
break;
|
|
case 1:
|
|
tmp_blk_size = SDMMC_DEFAULT_BLOCK_SIZE;
|
|
|
|
csd->device_size = (uint32_t)((raw_csd[2U] &
|
|
0x3FU) << 16U);
|
|
csd->device_size |= (uint32_t)((raw_csd[1U] &
|
|
0xFFFF0000U) >> 16U);
|
|
|
|
tmp_blk_cout = ((csd->device_size + 1U) * 1024U);
|
|
if (blk_cout)
|
|
*blk_cout = tmp_blk_cout;
|
|
if (blk_size)
|
|
*blk_size = tmp_blk_size;
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
|
|
if ((uint8_t)((raw_csd[1U] & 0x4000U) >> 14U))
|
|
csd->flags |= SD_CSD_ERASE_BLK_EN_FLAG;
|
|
csd->erase_size = (uint8_t)((raw_csd[1U] &
|
|
0x3F80U) >> 7U);
|
|
csd->write_prtect_size = (uint8_t)(raw_csd[1U] &
|
|
0x7FU);
|
|
csd->write_speed_factor = (uint8_t)((raw_csd[0U] &
|
|
0x1C000000U) >> 26U);
|
|
csd->write_blk_len = (uint8_t)((raw_csd[0U] &
|
|
0x3C00000U) >> 22U);
|
|
if ((uint8_t)((raw_csd[0U] & 0x200000U) >> 21U))
|
|
csd->flags |= SD_CSD_WRITE_BLK_PARTIAL_FLAG;
|
|
if ((uint8_t)((raw_csd[0U] & 0x8000U) >> 15U))
|
|
csd->flags |= SD_CSD_FILE_FMT_GRP_FLAG;
|
|
if ((uint8_t)((raw_csd[0U] & 0x4000U) >> 14U))
|
|
csd->flags |= SD_CSD_COPY_FLAG;
|
|
if ((uint8_t)((raw_csd[0U] & 0x2000U) >> 13U))
|
|
csd->flags |=
|
|
SD_CSD_PERMANENT_WRITE_PROTECT_FLAG;
|
|
if ((uint8_t)((raw_csd[0U] & 0x1000U) >> 12U))
|
|
csd->flags |=
|
|
SD_CSD_TMP_WRITE_PROTECT_FLAG;
|
|
csd->file_fmt = (uint8_t)((raw_csd[0U] & 0xC00U) >> 10U);
|
|
}
|
|
|
|
static inline void sdhc_decode_scr(struct sd_scr *scr,
|
|
uint32_t *raw_scr, uint32_t *version)
|
|
{
|
|
uint32_t tmp_version = 0;
|
|
|
|
scr->scr_structure = (uint8_t)((raw_scr[0U] & 0xF0000000U) >> 28U);
|
|
scr->sd_spec = (uint8_t)((raw_scr[0U] & 0xF000000U) >> 24U);
|
|
if ((uint8_t)((raw_scr[0U] & 0x800000U) >> 23U))
|
|
scr->flags |= SD_SCR_DATA_STATUS_AFTER_ERASE;
|
|
scr->sd_sec = (uint8_t)((raw_scr[0U] & 0x700000U) >> 20U);
|
|
scr->sd_width = (uint8_t)((raw_scr[0U] & 0xF0000U) >> 16U);
|
|
if ((uint8_t)((raw_scr[0U] & 0x8000U) >> 15U))
|
|
scr->flags |= SD_SCR_SPEC3;
|
|
scr->sd_ext_sec = (uint8_t)((raw_scr[0U] & 0x7800U) >> 10U);
|
|
scr->cmd_support = (uint8_t)(raw_scr[0U] & 0x3U);
|
|
scr->rsvd = raw_scr[1U];
|
|
/* Get specification version. */
|
|
switch (scr->sd_spec) {
|
|
case 0U:
|
|
tmp_version = SD_SPEC_VER1_0;
|
|
break;
|
|
case 1U:
|
|
tmp_version = SD_SPEC_VER1_1;
|
|
break;
|
|
case 2U:
|
|
tmp_version = SD_SPEC_VER2_0;
|
|
if (scr->flags & SD_SCR_SPEC3) {
|
|
tmp_version = SD_SPEC_VER3_0;
|
|
}
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
|
|
if (version && tmp_version)
|
|
*version = tmp_version;
|
|
}
|
|
|
|
static inline void sdhc_decode_cid(struct sd_cid *cid,
|
|
uint32_t *raw_cid)
|
|
{
|
|
cid->manufacturer = (uint8_t)((raw_cid[3U] & 0xFF000000U) >> 24U);
|
|
cid->application = (uint16_t)((raw_cid[3U] & 0xFFFF00U) >> 8U);
|
|
|
|
cid->name[0U] = (uint8_t)((raw_cid[3U] & 0xFFU));
|
|
cid->name[1U] = (uint8_t)((raw_cid[2U] & 0xFF000000U) >> 24U);
|
|
cid->name[2U] = (uint8_t)((raw_cid[2U] & 0xFF0000U) >> 16U);
|
|
cid->name[3U] = (uint8_t)((raw_cid[2U] & 0xFF00U) >> 8U);
|
|
cid->name[4U] = (uint8_t)((raw_cid[2U] & 0xFFU));
|
|
|
|
cid->version = (uint8_t)((raw_cid[1U] & 0xFF000000U) >> 24U);
|
|
|
|
cid->ser_num = (uint32_t)((raw_cid[1U] & 0xFFFFFFU) << 8U);
|
|
cid->ser_num |= (uint32_t)((raw_cid[0U] & 0xFF000000U) >> 24U);
|
|
|
|
cid->date = (uint16_t)((raw_cid[0U] & 0xFFF00U) >> 8U);
|
|
}
|
|
|
|
#endif /*ZEPHYR_INCLUDE_DISK_DRIVER_SDMMC_H_*/
|