Michael Scott ee92cf4d68 drivers: modem: ublox-sara-r4: Support SARA-U2 modems, sense VINT ... This adds support for SARA-U2 modems. They have different timings on the PWR_ON pin, don't support AT+CESQ and require a manual GPRS connection setup. The VINT pin is used as a more reliable and faster way to power on the modem. Based on work by Göran Weinholt <goran.weinholt@endian.se> Signed-off-by: Michael Scott <mike@foundries.io>		2019-08-10 00:03:39 +02:00
..
96b_argonkey	drivers: spi: spi_ll_stm32: Add config to manage slave select	2019-08-01 11:58:02 -04:00
96b_avenger96	boards: arm: 96b_avenger96: Enable Mailbox support	2019-08-08 11:35:00 +02:00
96b_carbon	drivers: spi: spi_ll_stm32: Add config to manage slave select	2019-08-01 11:58:02 -04:00
96b_carbon_nrf51	dts: Replace status = "ok" with status = "okay"	2019-06-14 19:51:13 -05:00
96b_meerkat96	boards: dts: Cleanup some "ok" -> "okay"	2019-06-28 14:38:57 -05:00
96b_neonkey	drivers: spi: spi_ll_stm32: Add config to manage slave select	2019-08-01 11:58:02 -04:00
96b_nitrogen	boards: 96b_nitrogen: Remove 'csn-pin' property from SPI master	2019-07-31 14:35:11 +03:00
96b_stm32_sensor_mez	drivers: spi: spi_ll_stm32: Add config to manage slave select	2019-08-01 11:58:02 -04:00
96b_wistrio	cleanup: include/: move pinmux.h to drivers/pinmux.h	2019-06-27 22:55:49 -04:00
adafruit_feather_m0_basic_proto	dts: Add information about CPU frequency to the cpu nodes	2019-07-17 21:53:36 +02:00
adafruit_trinket_m0	dts: Add information about CPU frequency to the cpu nodes	2019-07-17 21:53:36 +02:00
arduino_due	dts: Add information about CPU frequency to the cpu nodes	2019-07-17 21:53:36 +02:00
arduino_zero	dts: Add information about CPU frequency to the cpu nodes	2019-07-17 21:53:36 +02:00
atsamd20_xpro	dts: Add information about CPU frequency to the cpu nodes	2019-07-17 21:53:36 +02:00
atsamd21_xpro	dts: Add information about CPU frequency to the cpu nodes	2019-07-17 21:53:36 +02:00
atsamr21_xpro	dts: Add information about CPU frequency to the cpu nodes	2019-07-17 21:53:36 +02:00
b_l072z_lrwan1	drivers: spi: spi_ll_stm32: Add config to manage slave select	2019-08-01 11:58:02 -04:00
bbc_microbit	Bluetooth: hci_uart: Use DT for the hci_uart UART	2019-06-26 12:37:04 +02:00
bl652_dvk	Bluetooth: hci_uart: Use DT for the hci_uart UART	2019-06-26 12:37:04 +02:00
bl654_dvk	dts/spi-nor: use bytestring for JEDEC ID	2019-07-24 09:20:56 -04:00
cc26x2r1_launchxl	dts: Replace status = "ok" with status = "okay"	2019-06-14 19:51:13 -05:00
cc1352r1_launchxl	dts: Replace status = "ok" with status = "okay"	2019-06-14 19:51:13 -05:00
cc2650_sensortag	cleanup: include/: move pinmux.h to drivers/pinmux.h	2019-06-27 22:55:49 -04:00
cc3220sf_launchxl	boards: cc3220sf_launchxl: Use SDK OpenOCD	2019-07-24 14:24:24 -04:00
colibri_imx7d_m4	boards: colibri_imx7d_m4: this board supports PWM	2019-07-12 05:54:16 -07:00
cy8ckit_062_wifi_bt_m0	cleanup: include/: move pinmux.h to drivers/pinmux.h	2019-06-27 22:55:49 -04:00
cy8ckit_062_wifi_bt_m4	cleanup: include/: move pinmux.h to drivers/pinmux.h	2019-06-27 22:55:49 -04:00
disco_l475_iot1	disco_l475_iot1: Enable I2C3	2019-07-23 10:52:28 +02:00
dragino_lsn50	cleanup: include/: move pinmux.h to drivers/pinmux.h	2019-06-27 22:55:49 -04:00
efm32hg_slstk3400a	board: efm32hg_slstk3400a: Add storage partition	2019-08-05 13:22:09 +02:00
efm32pg_stk3402a	board: efm32pg_stk3402a: Add storage partition	2019-08-05 13:22:09 +02:00
efm32wg_stk3800	board: efm32wg_stk3800: Add storage partition	2019-08-05 13:22:09 +02:00
efr32_slwstk6061a	board: efr32_slwstk6061a: Add storage partition	2019-08-05 13:22:09 +02:00
efr32mg_sltb004a	board: efr32mg_sltb004a: Add storage partition	2019-08-05 13:22:09 +02:00
frdm_k64f	dts: Add information about CPU frequency to the cpu nodes	2019-07-17 21:53:36 +02:00
frdm_kl25z	dts: Add information about CPU frequency to the cpu nodes	2019-07-17 21:53:36 +02:00
frdm_kw41z	cleanup: include/: move pinmux.h to drivers/pinmux.h	2019-06-27 22:55:49 -04:00
hexiwear_k64	dts: Add information about CPU frequency to the cpu nodes	2019-07-17 21:53:36 +02:00
hexiwear_kw40z	cleanup: include/: move pinmux.h to drivers/pinmux.h	2019-06-27 22:55:49 -04:00
holyiot_yj16019	boards: holyiot_yj16019: Fix radio capabilities	2019-07-12 12:58:09 +02:00
lpcxpresso55s69	boards: lpcxpresso55s69: Enable pyocd runner	2019-07-10 03:44:19 -05:00
lpcxpresso54114	dts: Add information about CPU frequency to the cpu nodes	2019-07-17 21:53:36 +02:00
mec15xxevb_assy6853	board: mec: Select cortex-M systick-based driver	2019-08-06 15:13:45 -07:00
mec2016evb_assy6797	doc: fix misspellings in documentation	2019-06-18 15:08:19 -04:00
mikroe_mini_m4_for_stm32	drivers: spi: spi_ll_stm32: Add config to manage slave select	2019-08-01 11:58:02 -04:00
mimxrt1015_evk	dts/spi-nor: use bytestring for JEDEC ID	2019-07-24 09:20:56 -04:00
mimxrt1020_evk	dts/spi-nor: use bytestring for JEDEC ID	2019-07-24 09:20:56 -04:00
mimxrt1050_evk	gui: Add support for lvgl API version 6	2019-08-09 07:35:38 -05:00
mimxrt1060_evk	gui: Add support for lvgl API version 6	2019-08-09 07:35:38 -05:00
mimxrt1064_evk	boards: mimzzrt1064_evk: Add pwm-led0 alias	2019-08-07 07:38:40 -05:00
mps2_an385	gpio: arm: cmsdk-gpio: Fixup dts binding / nodes	2019-08-09 11:49:16 -05:00
mps2_an521	gpio: arm: cmsdk-gpio: Fixup dts binding / nodes	2019-08-09 11:49:16 -05:00
msp_exp432p401r_launchxl	dts: Add information about CPU frequency to the cpu nodes	2019-07-17 21:53:36 +02:00
nrf51_ble400	boards: add supported devices to boards	2019-07-12 05:54:16 -07:00
nrf51_blenano	Bluetooth: hci_uart: Use DT for the hci_uart UART	2019-06-26 12:37:04 +02:00
nrf51_pca10028	Bluetooth: hci_uart: Use DT for the hci_uart UART	2019-06-26 12:37:04 +02:00
nrf51_pca10031	boards: arm: Add support for nRF51 Dongle (PCA10031)	2019-07-01 14:19:08 +02:00
nrf51_vbluno51	Bluetooth: hci_uart: Use DT for the hci_uart UART	2019-06-26 12:37:04 +02:00
nrf52_adafruit_feather	boards: match specified jlink swd speed when using pyocd runner	2019-07-09 08:52:44 -05:00
nrf52_blenano2	Bluetooth: hci_uart: Use DT for the hci_uart UART	2019-06-26 12:37:04 +02:00
nrf52_pca10040	boards: arm: nrf52840_pca10056/nrf52_pca10040: enable pyocd runner	2019-07-10 12:11:46 -05:00
nrf52_pca20020	cleanup: include/: move misc/printk.h to sys/printk.h	2019-06-27 22:55:49 -04:00
nrf52_sparkfun	Bluetooth: hci_uart: Use DT for the hci_uart UART	2019-06-26 12:37:04 +02:00
nrf52_vbluno52	Bluetooth: hci_uart: Use DT for the hci_uart UART	2019-06-26 12:37:04 +02:00
nrf9160_pca10090	soc: nrf9160: Remove unsupported Kconfig option GPIO_AS_PINRESET	2019-08-09 20:14:24 +02:00
nrf52810_pca10040	Bluetooth: hci_uart: Use DT for the hci_uart UART	2019-06-26 12:37:04 +02:00
nrf52811_pca10056	tests: pwm_api: remove whitelisting	2019-07-12 05:54:16 -07:00
nrf52832_mdk	tests: pwm_api: remove whitelisting	2019-07-12 05:54:16 -07:00
nrf52840_blip	boards: add supported devices to boards	2019-07-12 05:54:16 -07:00
nrf52840_mdk	tests: pwm_api: remove whitelisting	2019-07-12 05:54:16 -07:00
nrf52840_papyr	Bluetooth: hci_uart: Use DT for the hci_uart UART	2019-06-26 12:37:04 +02:00
nrf52840_pca10056	dts/spi-nor: use bytestring for JEDEC ID	2019-07-24 09:20:56 -04:00
nrf52840_pca10059	boards: nrf52840_pca10059: Enable ADC in DT	2019-07-22 16:20:11 +02:00
nrf52840_pca10090	boards: arm: nrf52840_pca10090: swap error for assert in board.c	2019-07-11 11:27:47 +02:00
nucleo_f030r8	drivers: spi: spi_ll_stm32: Add config to manage slave select	2019-08-01 11:58:02 -04:00
nucleo_f070rb	cleanup: include/: move pinmux.h to drivers/pinmux.h	2019-06-27 22:55:49 -04:00
nucleo_f091rc	cleanup: include/: move pinmux.h to drivers/pinmux.h	2019-06-27 22:55:49 -04:00
nucleo_f103rb	drivers: spi: spi_ll_stm32: Add config to manage slave select	2019-08-01 11:58:02 -04:00
nucleo_f207zg	boards/arm: Remove 1000 Hz tick rate on STM32 boards	2019-07-02 22:52:29 -04:00
nucleo_f302r8	drivers: spi: spi_ll_stm32: Add config to manage slave select	2019-08-01 11:58:02 -04:00
nucleo_f334r8	drivers: spi: spi_ll_stm32: Add config to manage slave select	2019-08-01 11:58:02 -04:00
nucleo_f401re	drivers: spi: spi_ll_stm32: Add config to manage slave select	2019-08-01 11:58:02 -04:00
nucleo_f411re	drivers: spi: spi_ll_stm32: Add config to manage slave select	2019-08-01 11:58:02 -04:00
nucleo_f412zg	drivers: spi: spi_ll_stm32: Add config to manage slave select	2019-08-01 11:58:02 -04:00
nucleo_f413zh	drivers: spi: spi_ll_stm32: Add config to manage slave select	2019-08-01 11:58:02 -04:00
nucleo_f429zi	drivers: spi: spi_ll_stm32: Add config to manage slave select	2019-08-01 11:58:02 -04:00
nucleo_f446re	drivers: spi: spi_ll_stm32: Add config to manage slave select	2019-08-01 11:58:02 -04:00
nucleo_f746zg	drivers: spi: spi_ll_stm32: Add config to manage slave select	2019-08-01 11:58:02 -04:00
nucleo_f756zg	drivers: spi: spi_ll_stm32: Add config to manage slave select	2019-08-01 11:58:02 -04:00
nucleo_g071rb	dts: Replace more status = "ok" with status = "okay"	2019-08-08 14:03:25 -05:00
nucleo_l4r5zi	drivers: spi: spi_ll_stm32: Add config to manage slave select	2019-08-01 11:58:02 -04:00
nucleo_l053r8	boards/arm: Remove 1000 Hz tick rate on STM32 boards	2019-07-02 22:52:29 -04:00
nucleo_l073rz	cleanup: include/: move pinmux.h to drivers/pinmux.h	2019-06-27 22:55:49 -04:00
nucleo_l432kc	drivers: spi: spi_ll_stm32: Add config to manage slave select	2019-08-01 11:58:02 -04:00
nucleo_l476rg	drivers: spi: spi_ll_stm32: Add config to manage slave select	2019-08-01 11:58:02 -04:00
nucleo_l496zg	cleanup: include/: move pinmux.h to drivers/pinmux.h	2019-06-27 22:55:49 -04:00
nucleo_wb55rg	boards: nucleo_wb55rg: Add link to reference manual	2019-08-06 05:21:33 -04:00
olimex_stm32_e407	boards/arm: Remove 1000 Hz tick rate on STM32 boards	2019-07-02 22:52:29 -04:00
olimex_stm32_h407	boards/arm: Remove 1000 Hz tick rate on STM32 boards	2019-07-02 22:52:29 -04:00
olimex_stm32_p405	boards/arm: Remove 1000 Hz tick rate on STM32 boards	2019-07-02 22:52:29 -04:00
olimexino_stm32	drivers: spi: spi_ll_stm32: Add config to manage slave select	2019-08-01 11:58:02 -04:00
particle_argon	dts/spi-nor: use bytestring for JEDEC ID	2019-07-24 09:20:56 -04:00
particle_boron	drivers: modem: ublox-sara-r4: Support SARA-U2 modems, sense VINT	2019-08-10 00:03:39 +02:00
particle_xenon	dts/spi-nor: use bytestring for JEDEC ID	2019-07-24 09:20:56 -04:00
qemu_cortex_m3	boards: Set support for serial port networking as netif:serial-net	2019-07-29 10:24:46 +03:00
qemu_cortex_r5	boards: qemu_cortex_r5: Add qemu test board for the Cortex-R series	2019-08-09 22:50:50 +02:00
reel_board	boards: mark boards as supporting usb_cdc in DT	2019-07-12 05:54:16 -07:00
sam4s_xplained	dts: Add information about CPU frequency to the cpu nodes	2019-07-17 21:53:36 +02:00
sam_e70_xplained	dts: Make instance defines consistent	2019-07-30 17:10:31 -05:00
stm32_min_dev	drivers: spi: spi_ll_stm32: Add config to manage slave select	2019-08-01 11:58:02 -04:00
stm32f0_disco	boards: dts: cleanup partition node names	2019-07-02 20:26:56 -04:00
stm32f3_disco	drivers: spi: spi_ll_stm32: Add config to manage slave select	2019-08-01 11:58:02 -04:00
stm32f4_disco	boards/arm: Remove 1000 Hz tick rate on STM32 boards	2019-07-02 22:52:29 -04:00
stm32f072_eval	cleanup: include/: move pinmux.h to drivers/pinmux.h	2019-06-27 22:55:49 -04:00
stm32f072b_disco	cleanup: include/: move pinmux.h to drivers/pinmux.h	2019-06-27 22:55:49 -04:00
stm32f411e_disco	boards/arm: Remove 1000 Hz tick rate on STM32 boards	2019-07-02 22:52:29 -04:00
stm32f412g_disco	boards/arm: Remove 1000 Hz tick rate on STM32 boards	2019-07-02 22:52:29 -04:00
stm32f429i_disc1	boards: stm32f429_disc1: add i2c	2019-07-29 16:47:34 -05:00
stm32f469i_disco	boards/arm: Remove 1000 Hz tick rate on STM32 boards	2019-07-02 22:52:29 -04:00
stm32f723e_disco	boards/arm: Remove 1000 Hz tick rate on STM32 boards	2019-07-02 22:52:29 -04:00
stm32f746g_disco	drivers: spi: spi_ll_stm32: Add config to manage slave select	2019-08-01 11:58:02 -04:00
stm32f769i_disco	boards: arm: Activate DTCM for STM32F7 boards with Ethernet	2019-07-19 10:05:46 +02:00
stm32h747i_disco	dts: Replace more status = "ok" with status = "okay"	2019-08-08 14:03:25 -05:00
stm32l476g_disco	cleanup: include/: move pinmux.h to drivers/pinmux.h	2019-06-27 22:55:49 -04:00
stm32l496g_disco	cleanup: include/: move pinmux.h to drivers/pinmux.h	2019-06-27 22:55:49 -04:00
stm32mp157c_dk2	boards: arm: stm32mp157c_dk2: Add SPI support	2019-08-05 13:52:34 -05:00
stm3210c_eval	cleanup: include/: move pinmux.h to drivers/pinmux.h	2019-06-27 22:55:49 -04:00
stm32373c_eval	cleanup: include/: move pinmux.h to drivers/pinmux.h	2019-06-27 22:55:49 -04:00
twr_ke18f	boards: arm: twr_ke18f: add PWM LEDs	2019-08-09 07:32:43 -05:00
udoo_neo_full_m4	dts: Replace status = "ok" with status = "okay"	2019-06-14 19:51:13 -05:00
usb_kw24d512	dts: Add information about CPU frequency to the cpu nodes	2019-07-17 21:53:36 +02:00
v2m_beetle	gpio: arm: cmsdk-gpio: Fixup dts binding / nodes	2019-08-09 11:49:16 -05:00
v2m_musca	dts: Add information about system bus frequency to the dts	2019-07-17 21:53:36 +02:00
v2m_musca_b1	arm: Musca B1: Migrate to eFlash	2019-07-31 10:31:29 -04:00
warp7_m4	dts: Rename SW._GPIO_* -> DT_ALIAS_SW._GPIOS_*	2019-07-01 07:14:36 -05:00
index.rst	doc: fix sidebar nav issues with board docs	2017-06-27 19:21:29 -04:00