569 lines
13 KiB
C
569 lines
13 KiB
C
/*
|
|
* Copyright (c) 2017 Jan Van Winkel <jan.van_winkel@dxplore.eu>
|
|
* Copyright (c) 2019 Nordic Semiconductor ASA
|
|
* Copyright (c) 2019 Marc Reilly
|
|
* Copyright (c) 2019 PHYTEC Messtechnik GmbH
|
|
* Copyright (c) 2020 Endian Technologies AB
|
|
* Copyright (c) 2020 Kim Bøndergaard <kim@fam-boendergaard.dk>
|
|
*
|
|
* SPDX-License-Identifier: Apache-2.0
|
|
*/
|
|
|
|
#define DT_DRV_COMPAT sitronix_st7735r
|
|
|
|
#include "display_st7735r.h"
|
|
|
|
#include <zephyr/device.h>
|
|
#include <zephyr/drivers/spi.h>
|
|
#include <zephyr/drivers/gpio.h>
|
|
#include <zephyr/pm/device.h>
|
|
#include <zephyr/sys/byteorder.h>
|
|
#include <zephyr/drivers/display.h>
|
|
|
|
#include <zephyr/logging/log.h>
|
|
LOG_MODULE_REGISTER(display_st7735r, CONFIG_DISPLAY_LOG_LEVEL);
|
|
|
|
#define ST7735R_RESET_TIME K_MSEC(1)
|
|
#define ST7735R_EXIT_SLEEP_TIME K_MSEC(120)
|
|
|
|
#define ST7735R_PIXEL_SIZE 2u
|
|
|
|
struct st7735r_config {
|
|
struct spi_dt_spec bus;
|
|
struct gpio_dt_spec cmd_data;
|
|
struct gpio_dt_spec reset;
|
|
uint16_t height;
|
|
uint16_t width;
|
|
uint8_t madctl;
|
|
uint8_t colmod;
|
|
uint8_t caset[4];
|
|
uint8_t raset[4];
|
|
uint8_t vmctr1;
|
|
uint8_t invctr;
|
|
uint8_t pwctr1[3];
|
|
uint8_t pwctr2[1];
|
|
uint8_t pwctr3[2];
|
|
uint8_t pwctr4[2];
|
|
uint8_t pwctr5[2];
|
|
uint8_t frmctr1[3];
|
|
uint8_t frmctr2[3];
|
|
uint8_t frmctr3[6];
|
|
uint8_t gamctrp1[16];
|
|
uint8_t gamctrn1[16];
|
|
bool inversion_on;
|
|
};
|
|
|
|
struct st7735r_data {
|
|
uint16_t x_offset;
|
|
uint16_t y_offset;
|
|
};
|
|
|
|
static void st7735r_set_lcd_margins(const struct device *dev,
|
|
uint16_t x_offset, uint16_t y_offset)
|
|
{
|
|
struct st7735r_data *data = dev->data;
|
|
|
|
data->x_offset = x_offset;
|
|
data->y_offset = y_offset;
|
|
}
|
|
|
|
static void st7735r_set_cmd(const struct device *dev, int is_cmd)
|
|
{
|
|
const struct st7735r_config *config = dev->config;
|
|
|
|
gpio_pin_set_dt(&config->cmd_data, is_cmd);
|
|
}
|
|
|
|
static int st7735r_transmit(const struct device *dev, uint8_t cmd,
|
|
const uint8_t *tx_data, size_t tx_count)
|
|
{
|
|
const struct st7735r_config *config = dev->config;
|
|
struct spi_buf tx_buf = { .buf = &cmd, .len = 1 };
|
|
struct spi_buf_set tx_bufs = { .buffers = &tx_buf, .count = 1 };
|
|
int ret;
|
|
|
|
st7735r_set_cmd(dev, 1);
|
|
ret = spi_write_dt(&config->bus, &tx_bufs);
|
|
if (ret < 0) {
|
|
return ret;
|
|
}
|
|
|
|
if (tx_data != NULL) {
|
|
tx_buf.buf = (void *)tx_data;
|
|
tx_buf.len = tx_count;
|
|
st7735r_set_cmd(dev, 0);
|
|
ret = spi_write_dt(&config->bus, &tx_bufs);
|
|
if (ret < 0) {
|
|
return ret;
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int st7735r_exit_sleep(const struct device *dev)
|
|
{
|
|
int ret;
|
|
|
|
ret = st7735r_transmit(dev, ST7735R_CMD_SLEEP_OUT, NULL, 0);
|
|
if (ret < 0) {
|
|
return ret;
|
|
}
|
|
|
|
k_sleep(ST7735R_EXIT_SLEEP_TIME);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int st7735r_reset_display(const struct device *dev)
|
|
{
|
|
const struct st7735r_config *config = dev->config;
|
|
int ret;
|
|
|
|
LOG_DBG("Resetting display");
|
|
if (config->reset.port != NULL) {
|
|
gpio_pin_set_dt(&config->reset, 1);
|
|
k_sleep(ST7735R_RESET_TIME);
|
|
gpio_pin_set_dt(&config->reset, 0);
|
|
} else {
|
|
ret = st7735r_transmit(dev, ST7735R_CMD_SW_RESET, NULL, 0);
|
|
if (ret < 0) {
|
|
return ret;
|
|
}
|
|
}
|
|
|
|
k_sleep(ST7735R_EXIT_SLEEP_TIME);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int st7735r_blanking_on(const struct device *dev)
|
|
{
|
|
return st7735r_transmit(dev, ST7735R_CMD_DISP_OFF, NULL, 0);
|
|
}
|
|
|
|
static int st7735r_blanking_off(const struct device *dev)
|
|
{
|
|
return st7735r_transmit(dev, ST7735R_CMD_DISP_ON, NULL, 0);
|
|
}
|
|
|
|
static int st7735r_read(const struct device *dev,
|
|
const uint16_t x,
|
|
const uint16_t y,
|
|
const struct display_buffer_descriptor *desc,
|
|
void *buf)
|
|
{
|
|
return -ENOTSUP;
|
|
}
|
|
|
|
static int st7735r_set_mem_area(const struct device *dev,
|
|
const uint16_t x, const uint16_t y,
|
|
const uint16_t w, const uint16_t h)
|
|
{
|
|
struct st7735r_data *data = dev->data;
|
|
uint16_t spi_data[2];
|
|
|
|
int ret;
|
|
|
|
uint16_t ram_x = x + data->x_offset;
|
|
uint16_t ram_y = y + data->y_offset;
|
|
|
|
spi_data[0] = sys_cpu_to_be16(ram_x);
|
|
spi_data[1] = sys_cpu_to_be16(ram_x + w - 1);
|
|
ret = st7735r_transmit(dev, ST7735R_CMD_CASET, (uint8_t *)&spi_data[0], 4);
|
|
if (ret < 0) {
|
|
return ret;
|
|
}
|
|
|
|
spi_data[0] = sys_cpu_to_be16(ram_y);
|
|
spi_data[1] = sys_cpu_to_be16(ram_y + h - 1);
|
|
ret = st7735r_transmit(dev, ST7735R_CMD_RASET, (uint8_t *)&spi_data[0], 4);
|
|
if (ret < 0) {
|
|
return ret;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int st7735r_write(const struct device *dev,
|
|
const uint16_t x,
|
|
const uint16_t y,
|
|
const struct display_buffer_descriptor *desc,
|
|
const void *buf)
|
|
{
|
|
const struct st7735r_config *config = dev->config;
|
|
const uint8_t *write_data_start = (uint8_t *) buf;
|
|
struct spi_buf tx_buf;
|
|
struct spi_buf_set tx_bufs;
|
|
uint16_t write_cnt;
|
|
uint16_t nbr_of_writes;
|
|
uint16_t write_h;
|
|
int ret;
|
|
|
|
__ASSERT(desc->width <= desc->pitch, "Pitch is smaller than width");
|
|
__ASSERT((desc->pitch * ST7735R_PIXEL_SIZE * desc->height)
|
|
<= desc->buf_size, "Input buffer too small");
|
|
|
|
LOG_DBG("Writing %dx%d (w,h) @ %dx%d (x,y)",
|
|
desc->width, desc->height, x, y);
|
|
ret = st7735r_set_mem_area(dev, x, y, desc->width, desc->height);
|
|
if (ret < 0) {
|
|
return ret;
|
|
}
|
|
|
|
if (desc->pitch > desc->width) {
|
|
write_h = 1U;
|
|
nbr_of_writes = desc->height;
|
|
} else {
|
|
write_h = desc->height;
|
|
nbr_of_writes = 1U;
|
|
}
|
|
|
|
ret = st7735r_transmit(dev, ST7735R_CMD_RAMWR,
|
|
(void *) write_data_start,
|
|
desc->width * ST7735R_PIXEL_SIZE * write_h);
|
|
if (ret < 0) {
|
|
return ret;
|
|
}
|
|
|
|
tx_bufs.buffers = &tx_buf;
|
|
tx_bufs.count = 1;
|
|
|
|
write_data_start += (desc->pitch * ST7735R_PIXEL_SIZE);
|
|
for (write_cnt = 1U; write_cnt < nbr_of_writes; ++write_cnt) {
|
|
tx_buf.buf = (void *)write_data_start;
|
|
tx_buf.len = desc->width * ST7735R_PIXEL_SIZE * write_h;
|
|
ret = spi_write_dt(&config->bus, &tx_bufs);
|
|
if (ret < 0) {
|
|
return ret;
|
|
}
|
|
|
|
write_data_start += (desc->pitch * ST7735R_PIXEL_SIZE);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void *st7735r_get_framebuffer(const struct device *dev)
|
|
{
|
|
return NULL;
|
|
}
|
|
|
|
static int st7735r_set_brightness(const struct device *dev,
|
|
const uint8_t brightness)
|
|
{
|
|
return -ENOTSUP;
|
|
}
|
|
|
|
static int st7735r_set_contrast(const struct device *dev,
|
|
const uint8_t contrast)
|
|
{
|
|
return -ENOTSUP;
|
|
}
|
|
|
|
static void st7735r_get_capabilities(const struct device *dev,
|
|
struct display_capabilities *capabilities)
|
|
{
|
|
const struct st7735r_config *config = dev->config;
|
|
|
|
memset(capabilities, 0, sizeof(struct display_capabilities));
|
|
capabilities->x_resolution = config->width;
|
|
capabilities->y_resolution = config->height;
|
|
if (config->madctl & ST7735R_MADCTL_BGR) {
|
|
capabilities->supported_pixel_formats = PIXEL_FORMAT_BGR_565;
|
|
capabilities->current_pixel_format = PIXEL_FORMAT_BGR_565;
|
|
} else {
|
|
capabilities->supported_pixel_formats = PIXEL_FORMAT_RGB_565;
|
|
capabilities->current_pixel_format = PIXEL_FORMAT_RGB_565;
|
|
}
|
|
|
|
capabilities->current_orientation = DISPLAY_ORIENTATION_NORMAL;
|
|
}
|
|
|
|
static int st7735r_set_pixel_format(const struct device *dev,
|
|
const enum display_pixel_format pixel_format)
|
|
{
|
|
const struct st7735r_config *config = dev->config;
|
|
|
|
if ((pixel_format == PIXEL_FORMAT_RGB_565) &&
|
|
(~config->madctl & ST7735R_MADCTL_BGR)) {
|
|
return 0;
|
|
}
|
|
|
|
if ((pixel_format == PIXEL_FORMAT_BGR_565) &&
|
|
(config->madctl & ST7735R_MADCTL_BGR)) {
|
|
return 0;
|
|
}
|
|
|
|
LOG_ERR("Pixel format change not implemented");
|
|
|
|
return -ENOTSUP;
|
|
}
|
|
|
|
static int st7735r_set_orientation(const struct device *dev,
|
|
const enum display_orientation orientation)
|
|
{
|
|
if (orientation == DISPLAY_ORIENTATION_NORMAL) {
|
|
return 0;
|
|
}
|
|
|
|
LOG_ERR("Changing display orientation not implemented");
|
|
|
|
return -ENOTSUP;
|
|
}
|
|
|
|
static int st7735r_lcd_init(const struct device *dev)
|
|
{
|
|
const struct st7735r_config *config = dev->config;
|
|
struct st7735r_data *data = dev->data;
|
|
int ret;
|
|
|
|
st7735r_set_lcd_margins(dev, data->x_offset, data->y_offset);
|
|
|
|
ret = st7735r_transmit(dev, ST7735R_CMD_FRMCTR1, config->frmctr1,
|
|
sizeof(config->frmctr1));
|
|
if (ret < 0) {
|
|
return ret;
|
|
}
|
|
|
|
ret = st7735r_transmit(dev, ST7735R_CMD_FRMCTR2, config->frmctr2,
|
|
sizeof(config->frmctr2));
|
|
if (ret < 0) {
|
|
return ret;
|
|
}
|
|
|
|
ret = st7735r_transmit(dev, ST7735R_CMD_FRMCTR3, config->frmctr3,
|
|
sizeof(config->frmctr3));
|
|
if (ret < 0) {
|
|
return ret;
|
|
}
|
|
|
|
ret = st7735r_transmit(dev, ST7735R_CMD_INVCTR, &config->invctr, 1);
|
|
if (ret < 0) {
|
|
return ret;
|
|
}
|
|
|
|
ret = st7735r_transmit(dev, ST7735R_CMD_PWCTR1, config->pwctr1,
|
|
sizeof(config->pwctr1));
|
|
if (ret < 0) {
|
|
return ret;
|
|
}
|
|
|
|
ret = st7735r_transmit(dev, ST7735R_CMD_PWCTR2, config->pwctr2,
|
|
sizeof(config->pwctr2));
|
|
if (ret < 0) {
|
|
return ret;
|
|
}
|
|
|
|
ret = st7735r_transmit(dev, ST7735R_CMD_PWCTR3, config->pwctr3,
|
|
sizeof(config->pwctr3));
|
|
if (ret < 0) {
|
|
return ret;
|
|
}
|
|
|
|
ret = st7735r_transmit(dev, ST7735R_CMD_PWCTR4, config->pwctr4,
|
|
sizeof(config->pwctr4));
|
|
if (ret < 0) {
|
|
return ret;
|
|
}
|
|
|
|
ret = st7735r_transmit(dev, ST7735R_CMD_PWCTR5, config->pwctr5,
|
|
sizeof(config->pwctr5));
|
|
if (ret < 0) {
|
|
return ret;
|
|
}
|
|
|
|
ret = st7735r_transmit(dev, ST7735R_CMD_VMCTR1, &config->vmctr1, 1);
|
|
if (ret < 0) {
|
|
return ret;
|
|
}
|
|
|
|
if (config->inversion_on) {
|
|
ret = st7735r_transmit(dev, ST7735R_CMD_INV_ON, NULL, 0);
|
|
} else {
|
|
ret = st7735r_transmit(dev, ST7735R_CMD_INV_OFF, NULL, 0);
|
|
}
|
|
if (ret < 0) {
|
|
return ret;
|
|
}
|
|
|
|
ret = st7735r_transmit(dev, ST7735R_CMD_MADCTL, &config->madctl, 1);
|
|
if (ret < 0) {
|
|
return ret;
|
|
}
|
|
|
|
ret = st7735r_transmit(dev, ST7735R_CMD_COLMOD, &config->colmod, 1);
|
|
if (ret < 0) {
|
|
return ret;
|
|
}
|
|
|
|
ret = st7735r_transmit(dev, ST7735R_CMD_CASET, config->caset,
|
|
sizeof(config->caset));
|
|
if (ret < 0) {
|
|
return ret;
|
|
}
|
|
|
|
ret = st7735r_transmit(dev, ST7735R_CMD_RASET, config->raset,
|
|
sizeof(config->raset));
|
|
if (ret < 0) {
|
|
return ret;
|
|
}
|
|
|
|
ret = st7735r_transmit(dev, ST7735R_CMD_GAMCTRP1, config->gamctrp1,
|
|
sizeof(config->gamctrp1));
|
|
if (ret < 0) {
|
|
return ret;
|
|
}
|
|
|
|
ret = st7735r_transmit(dev, ST7735R_CMD_GAMCTRN1, config->gamctrn1,
|
|
sizeof(config->gamctrn1));
|
|
if (ret < 0) {
|
|
return ret;
|
|
}
|
|
|
|
ret = st7735r_transmit(dev, ST7735R_CMD_NORON, NULL, 0);
|
|
if (ret < 0) {
|
|
return ret;
|
|
}
|
|
|
|
ret = st7735r_transmit(dev, ST7735R_CMD_DISP_ON, NULL, 0);
|
|
if (ret < 0) {
|
|
return ret;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int st7735r_init(const struct device *dev)
|
|
{
|
|
const struct st7735r_config *config = dev->config;
|
|
int ret;
|
|
|
|
if (!spi_is_ready(&config->bus)) {
|
|
LOG_ERR("SPI bus %s not ready", config->bus.bus->name);
|
|
return -ENODEV;
|
|
}
|
|
|
|
if (config->reset.port != NULL) {
|
|
if (!device_is_ready(config->reset.port)) {
|
|
LOG_ERR("Reset GPIO port for display not ready");
|
|
return -ENODEV;
|
|
}
|
|
|
|
ret = gpio_pin_configure_dt(&config->reset,
|
|
GPIO_OUTPUT_INACTIVE);
|
|
if (ret) {
|
|
LOG_ERR("Couldn't configure reset pin");
|
|
return ret;
|
|
}
|
|
}
|
|
|
|
if (!device_is_ready(config->cmd_data.port)) {
|
|
LOG_ERR("cmd/DATA GPIO port not ready");
|
|
return -ENODEV;
|
|
}
|
|
|
|
ret = gpio_pin_configure_dt(&config->cmd_data, GPIO_OUTPUT);
|
|
if (ret) {
|
|
LOG_ERR("Couldn't configure cmd/DATA pin");
|
|
return ret;
|
|
}
|
|
|
|
ret = st7735r_reset_display(dev);
|
|
if (ret < 0) {
|
|
LOG_ERR("Couldn't reset display");
|
|
return ret;
|
|
}
|
|
|
|
ret = st7735r_exit_sleep(dev);
|
|
if (ret < 0) {
|
|
LOG_ERR("Couldn't exit sleep");
|
|
return ret;
|
|
}
|
|
|
|
ret = st7735r_lcd_init(dev);
|
|
if (ret < 0) {
|
|
LOG_ERR("Couldn't init LCD");
|
|
return ret;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
#ifdef CONFIG_PM_DEVICE
|
|
static int st7735r_pm_action(const struct device *dev,
|
|
enum pm_device_action action)
|
|
{
|
|
int ret = 0;
|
|
|
|
switch (action) {
|
|
case PM_DEVICE_ACTION_RESUME:
|
|
ret = st7735r_exit_sleep(dev);
|
|
break;
|
|
case PM_DEVICE_ACTION_SUSPEND:
|
|
ret = st7735r_transmit(dev, ST7735R_CMD_SLEEP_IN, NULL, 0);
|
|
break;
|
|
default:
|
|
ret = -ENOTSUP;
|
|
break;
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
#endif /* CONFIG_PM_DEVICE */
|
|
|
|
static const struct display_driver_api st7735r_api = {
|
|
.blanking_on = st7735r_blanking_on,
|
|
.blanking_off = st7735r_blanking_off,
|
|
.write = st7735r_write,
|
|
.read = st7735r_read,
|
|
.get_framebuffer = st7735r_get_framebuffer,
|
|
.set_brightness = st7735r_set_brightness,
|
|
.set_contrast = st7735r_set_contrast,
|
|
.get_capabilities = st7735r_get_capabilities,
|
|
.set_pixel_format = st7735r_set_pixel_format,
|
|
.set_orientation = st7735r_set_orientation,
|
|
};
|
|
|
|
|
|
#define ST7735R_INIT(inst) \
|
|
const static struct st7735r_config st7735r_config_ ## inst = { \
|
|
.bus = SPI_DT_SPEC_INST_GET( \
|
|
inst, SPI_OP_MODE_MASTER | SPI_WORD_SET(8), 0), \
|
|
.cmd_data = GPIO_DT_SPEC_INST_GET(inst, cmd_data_gpios), \
|
|
.reset = GPIO_DT_SPEC_INST_GET_OR(inst, reset_gpios, {}), \
|
|
.width = DT_INST_PROP(inst, width), \
|
|
.height = DT_INST_PROP(inst, height), \
|
|
.madctl = DT_INST_PROP(inst, madctl), \
|
|
.colmod = DT_INST_PROP(inst, colmod), \
|
|
.caset = DT_INST_PROP(inst, caset), \
|
|
.raset = DT_INST_PROP(inst, raset), \
|
|
.vmctr1 = DT_INST_PROP(inst, vmctr1), \
|
|
.invctr = DT_INST_PROP(inst, invctr), \
|
|
.pwctr1 = DT_INST_PROP(inst, pwctr1), \
|
|
.pwctr2 = DT_INST_PROP(inst, pwctr2), \
|
|
.pwctr3 = DT_INST_PROP(inst, pwctr3), \
|
|
.pwctr4 = DT_INST_PROP(inst, pwctr4), \
|
|
.pwctr5 = DT_INST_PROP(inst, pwctr5), \
|
|
.frmctr1 = DT_INST_PROP(inst, frmctr1), \
|
|
.frmctr2 = DT_INST_PROP(inst, frmctr2), \
|
|
.frmctr3 = DT_INST_PROP(inst, frmctr3), \
|
|
.gamctrp1 = DT_INST_PROP(inst, gamctrp1), \
|
|
.gamctrn1 = DT_INST_PROP(inst, gamctrn1), \
|
|
.inversion_on = DT_INST_PROP(inst, inversion_on), \
|
|
}; \
|
|
\
|
|
static struct st7735r_data st7735r_data_ ## inst = { \
|
|
.x_offset = DT_INST_PROP(inst, x_offset), \
|
|
.y_offset = DT_INST_PROP(inst, y_offset), \
|
|
}; \
|
|
\
|
|
PM_DEVICE_DT_INST_DEFINE(inst, st7735r_pm_action); \
|
|
\
|
|
DEVICE_DT_INST_DEFINE(inst, st7735r_init, PM_DEVICE_DT_INST_GET(inst), \
|
|
&st7735r_data_ ## inst, &st7735r_config_ ## inst, \
|
|
POST_KERNEL, CONFIG_DISPLAY_INIT_PRIORITY, \
|
|
&st7735r_api);
|
|
|
|
DT_INST_FOREACH_STATUS_OKAY(ST7735R_INIT)
|