40 lines
1.5 KiB
ReStructuredText
40 lines
1.5 KiB
ReStructuredText
:orphan:
|
|
|
|
.. nxp-opensda-probes
|
|
|
|
A debug probe is used for both flashing and debugging the board. This board has
|
|
an :ref:`opensda-onboard-debug-probe`. The default firmware present on this
|
|
probe is the :ref:`opensda-daplink-onboard-debug-probe`.
|
|
|
|
Based on the host tool installed, please use the following instructions
|
|
to setup your debug probe:
|
|
|
|
* :ref:`jlink-debug-host-tools`: `Using J-Link on NXP OpenSDA Boards`_
|
|
* :ref:`linkserver-debug-host-tools`: `Using DAPLink on NXP OpenSDA Boards`_
|
|
* :ref:`pyocd-debug-host-tools`: `Using DAPLink on NXP OpenSDA Boards`_
|
|
|
|
Using DAPLink on NXP OpenSDA Boards
|
|
-----------------------------------
|
|
|
|
1. If the debug firmware has been modified, follow the instructions provided at
|
|
:ref:`opensda-daplink-onboard-debug-probe` to reprogram the default debug
|
|
probe firmware on this board.
|
|
#. Ensure the SWD isolation jumpers are populated
|
|
|
|
Using J-Link on NXP OpenSDA Boards
|
|
----------------------------------
|
|
|
|
There are two options: the onboard debug circuit can be updated with Segger
|
|
J-Link firmware, or a :ref:`jlink-external-debug-probe` can be attached to the
|
|
board.
|
|
|
|
To update the onboard debug circuit, please do the following:
|
|
|
|
1. If the debug firmware has been modified, follow the instructions provided at
|
|
:ref:`opensda-jlink-onboard-debug-probe` to reprogram the default debug
|
|
probe firmware on this board.
|
|
#. Ensure the SWD isolation jumpers are removed.
|
|
|
|
To attach an external J-Link probe, ensure the SWD isolation jumpers are
|
|
removed, and connect the external probe to the JTAG/SWD header.
|