269 lines
6.5 KiB
C
269 lines
6.5 KiB
C
/* Bosch BMG160 gyro driver, trigger implementation
|
|
*
|
|
* Copyright (c) 2016 Intel Corporation
|
|
*
|
|
* SPDX-License-Identifier: Apache-2.0
|
|
*
|
|
* Datasheet:
|
|
* http://ae-bst.resource.bosch.com/media/_tech/media/datasheets/BST-BMG160-DS000-09.pdf
|
|
*/
|
|
|
|
#include <kernel.h>
|
|
#include <drivers/sensor.h>
|
|
|
|
#include "bmg160.h"
|
|
|
|
extern struct bmg160_device_data bmg160_data;
|
|
|
|
#include <logging/log.h>
|
|
LOG_MODULE_DECLARE(BMG160, CONFIG_SENSOR_LOG_LEVEL);
|
|
|
|
static inline void setup_int(const struct device *dev,
|
|
bool enable)
|
|
{
|
|
struct bmg160_device_data *data = dev->data;
|
|
const struct bmg160_device_config *const cfg =
|
|
dev->config;
|
|
|
|
gpio_pin_interrupt_configure(data->gpio,
|
|
cfg->int_pin,
|
|
enable
|
|
? GPIO_INT_EDGE_TO_ACTIVE
|
|
: GPIO_INT_DISABLE);
|
|
}
|
|
|
|
static void bmg160_gpio_callback(const struct device *port,
|
|
struct gpio_callback *cb,
|
|
uint32_t pin)
|
|
{
|
|
struct bmg160_device_data *bmg160 =
|
|
CONTAINER_OF(cb, struct bmg160_device_data, gpio_cb);
|
|
|
|
ARG_UNUSED(port);
|
|
ARG_UNUSED(pin);
|
|
|
|
#if defined(CONFIG_BMG160_TRIGGER_OWN_THREAD)
|
|
k_sem_give(&bmg160->trig_sem);
|
|
#elif defined(CONFIG_BMG160_TRIGGER_GLOBAL_THREAD)
|
|
k_work_submit(&bmg160->work);
|
|
#endif
|
|
}
|
|
|
|
static int bmg160_anymotion_set(const struct device *dev,
|
|
sensor_trigger_handler_t handler)
|
|
{
|
|
struct bmg160_device_data *bmg160 = dev->data;
|
|
uint8_t anymotion_en = 0U;
|
|
|
|
if (handler) {
|
|
anymotion_en = BMG160_ANY_EN_X |
|
|
BMG160_ANY_EN_Y |
|
|
BMG160_ANY_EN_Z;
|
|
}
|
|
|
|
if (bmg160_update_byte(dev, BMG160_REG_ANY_EN,
|
|
BMG160_ANY_EN_MASK, anymotion_en) < 0) {
|
|
return -EIO;
|
|
}
|
|
|
|
bmg160->anymotion_handler = handler;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int bmg160_drdy_set(const struct device *dev,
|
|
sensor_trigger_handler_t handler)
|
|
{
|
|
struct bmg160_device_data *bmg160 = dev->data;
|
|
|
|
if (bmg160_update_byte(dev, BMG160_REG_INT_EN0,
|
|
BMG160_DATA_EN,
|
|
handler ? BMG160_DATA_EN : 0) < 0) {
|
|
return -EIO;
|
|
}
|
|
|
|
bmg160->drdy_handler = handler;
|
|
|
|
return 0;
|
|
}
|
|
|
|
int bmg160_slope_config(const struct device *dev, enum sensor_attribute attr,
|
|
const struct sensor_value *val)
|
|
{
|
|
struct bmg160_device_data *bmg160 = dev->data;
|
|
|
|
if (attr == SENSOR_ATTR_SLOPE_TH) {
|
|
uint16_t any_th_dps, range_dps;
|
|
uint8_t any_th_reg_val;
|
|
|
|
any_th_dps = sensor_rad_to_degrees(val);
|
|
range_dps = BMG160_SCALE_TO_RANGE(bmg160->scale);
|
|
any_th_reg_val = any_th_dps * 2000U / range_dps;
|
|
|
|
/* the maximum slope depends on selected range */
|
|
if (any_th_dps > range_dps / 16U) {
|
|
return -ENOTSUP;
|
|
}
|
|
|
|
return bmg160_write_byte(dev, BMG160_REG_THRES,
|
|
any_th_dps & BMG160_THRES_MASK);
|
|
} else if (attr == SENSOR_ATTR_SLOPE_DUR) {
|
|
/* slope duration can be 4, 8, 12 or 16 samples */
|
|
if (val->val1 != 4 && val->val1 != 8 &&
|
|
val->val1 != 12 && val->val1 != 16) {
|
|
return -ENOTSUP;
|
|
}
|
|
|
|
return bmg160_write_byte(dev, BMG160_REG_ANY_EN,
|
|
(val->val1 << BMG160_ANY_DURSAMPLE_POS) &
|
|
BMG160_ANY_DURSAMPLE_MASK);
|
|
}
|
|
|
|
return -ENOTSUP;
|
|
}
|
|
|
|
int bmg160_trigger_set(const struct device *dev,
|
|
const struct sensor_trigger *trig,
|
|
sensor_trigger_handler_t handler)
|
|
{
|
|
if (trig->type == SENSOR_TRIG_DELTA) {
|
|
return bmg160_anymotion_set(dev, handler);
|
|
} else if (trig->type == SENSOR_TRIG_DATA_READY) {
|
|
return bmg160_drdy_set(dev, handler);
|
|
}
|
|
|
|
return -ENOTSUP;
|
|
}
|
|
|
|
static int bmg160_handle_anymotion_int(const struct device *dev)
|
|
{
|
|
struct bmg160_device_data *bmg160 = dev->data;
|
|
struct sensor_trigger any_trig = {
|
|
.type = SENSOR_TRIG_DELTA,
|
|
.chan = SENSOR_CHAN_GYRO_XYZ,
|
|
};
|
|
|
|
if (bmg160->anymotion_handler) {
|
|
bmg160->anymotion_handler(dev, &any_trig);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int bmg160_handle_dataready_int(const struct device *dev)
|
|
{
|
|
struct bmg160_device_data *bmg160 = dev->data;
|
|
struct sensor_trigger drdy_trig = {
|
|
.type = SENSOR_TRIG_DATA_READY,
|
|
.chan = SENSOR_CHAN_GYRO_XYZ,
|
|
};
|
|
|
|
if (bmg160->drdy_handler) {
|
|
bmg160->drdy_handler(dev, &drdy_trig);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void bmg160_handle_int(const struct device *dev)
|
|
{
|
|
uint8_t status_int[4];
|
|
|
|
if (bmg160_read(dev, BMG160_REG_INT_STATUS0, status_int, 4) < 0) {
|
|
return;
|
|
}
|
|
|
|
if (status_int[0] & BMG160_ANY_INT) {
|
|
bmg160_handle_anymotion_int(dev);
|
|
} else {
|
|
bmg160_handle_dataready_int(dev);
|
|
}
|
|
}
|
|
|
|
#ifdef CONFIG_BMG160_TRIGGER_OWN_THREAD
|
|
static K_KERNEL_STACK_DEFINE(bmg160_thread_stack, CONFIG_BMG160_THREAD_STACK_SIZE);
|
|
static struct k_thread bmg160_thread;
|
|
|
|
static void bmg160_thread_main(struct bmg160_device_data *bmg160)
|
|
{
|
|
while (true) {
|
|
k_sem_take(&bmg160->trig_sem, K_FOREVER);
|
|
|
|
bmg160_handle_int(bmg160->dev);
|
|
}
|
|
}
|
|
#endif
|
|
|
|
#ifdef CONFIG_BMG160_TRIGGER_GLOBAL_THREAD
|
|
static void bmg160_work_cb(struct k_work *work)
|
|
{
|
|
struct bmg160_device_data *bmg160 =
|
|
CONTAINER_OF(work, struct bmg160_device_data, work);
|
|
|
|
bmg160_handle_int(bmg160->dev);
|
|
}
|
|
#endif
|
|
|
|
int bmg160_trigger_init(const struct device *dev)
|
|
{
|
|
const struct bmg160_device_config *cfg = dev->config;
|
|
struct bmg160_device_data *bmg160 = dev->data;
|
|
|
|
/* set INT1 pin to: push-pull, active low */
|
|
if (bmg160_write_byte(dev, BMG160_REG_INT_EN1, 0) < 0) {
|
|
LOG_DBG("Failed to select interrupt pins type.");
|
|
return -EIO;
|
|
}
|
|
|
|
/* set interrupt mode to non-latched */
|
|
if (bmg160_write_byte(dev, BMG160_REG_INT_RST_LATCH, 0) < 0) {
|
|
LOG_DBG("Failed to set the interrupt mode.");
|
|
return -EIO;
|
|
}
|
|
|
|
/* map anymotion and high rate interrupts to INT1 pin */
|
|
if (bmg160_write_byte(dev, BMG160_REG_INT_MAP0,
|
|
BMG160_INT1_ANY | BMG160_INT1_HIGH) < 0) {
|
|
LOG_DBG("Unable to map interrupts.");
|
|
return -EIO;
|
|
}
|
|
|
|
/* map data ready, FIFO and FastOffset interrupts to INT1 pin */
|
|
if (bmg160_write_byte(dev, BMG160_REG_INT_MAP1,
|
|
BMG160_INT1_DATA | BMG160_INT1_FIFO |
|
|
BMG160_INT1_FAST_OFFSET) < 0) {
|
|
LOG_DBG("Unable to map interrupts.");
|
|
return -EIO;
|
|
}
|
|
|
|
bmg160->gpio = device_get_binding((char *)cfg->gpio_port);
|
|
if (!bmg160->gpio) {
|
|
LOG_DBG("Gpio controller %s not found", cfg->gpio_port);
|
|
return -EINVAL;
|
|
}
|
|
|
|
bmg160->dev = dev;
|
|
|
|
#if defined(CONFIG_BMG160_TRIGGER_OWN_THREAD)
|
|
k_sem_init(&bmg160->trig_sem, 0, K_SEM_MAX_LIMIT);
|
|
k_thread_create(&bmg160_thread, bmg160_thread_stack,
|
|
CONFIG_BMG160_THREAD_STACK_SIZE,
|
|
(k_thread_entry_t)bmg160_thread_main,
|
|
bmg160, NULL, NULL,
|
|
K_PRIO_COOP(CONFIG_BMG160_THREAD_PRIORITY), 0,
|
|
K_NO_WAIT);
|
|
|
|
#elif defined(CONFIG_BMG160_TRIGGER_GLOBAL_THREAD)
|
|
bmg160->work.handler = bmg160_work_cb;
|
|
#endif
|
|
|
|
gpio_pin_configure(bmg160->gpio, cfg->int_pin,
|
|
cfg->int_flags | GPIO_INT_EDGE_TO_ACTIVE);
|
|
gpio_init_callback(&bmg160->gpio_cb, bmg160_gpio_callback,
|
|
BIT(cfg->int_pin));
|
|
gpio_add_callback(bmg160->gpio, &bmg160->gpio_cb);
|
|
setup_int(dev, true);
|
|
|
|
return 0;
|
|
}
|