zephyr/soc/nordic/nrf53/soc.c

589 lines
19 KiB
C

/*
* Copyright (c) 2019 Nordic Semiconductor ASA
*
* SPDX-License-Identifier: Apache-2.0
*/
/**
* @file
* @brief System/hardware module for Nordic Semiconductor nRF53 family processor
*
* This module provides routines to initialize and support board-level hardware
* for the Nordic Semiconductor nRF53 family processor.
*/
#include <zephyr/kernel.h>
#include <zephyr/init.h>
#include <zephyr/sys/barrier.h>
#include <zephyr/dt-bindings/regulator/nrf5x.h>
#include <soc/nrfx_coredep.h>
#include <zephyr/logging/log.h>
#include <nrf_erratas.h>
#include <hal/nrf_power.h>
#include <hal/nrf_ipc.h>
#include <helpers/nrfx_gppi.h>
#if defined(CONFIG_SOC_NRF5340_CPUAPP)
#include <zephyr/drivers/gpio.h>
#include <zephyr/devicetree.h>
#include <hal/nrf_cache.h>
#include <hal/nrf_gpio.h>
#include <hal/nrf_oscillators.h>
#include <hal/nrf_regulators.h>
#elif defined(CONFIG_SOC_NRF5340_CPUNET)
#include <hal/nrf_nvmc.h>
#endif
#include <hal/nrf_wdt.h>
#include <hal/nrf_rtc.h>
#include <soc_secure.h>
#include <cmsis_core.h>
#define PIN_XL1 0
#define PIN_XL2 1
#define RTC1_PRETICK_CC_CHAN (RTC1_CC_NUM - 1)
/* Mask of CC channels capable of generating interrupts, see nrf_rtc_timer.c */
#define RTC1_PRETICK_SELECTED_CC_MASK BIT_MASK(CONFIG_NRF_RTC_TIMER_USER_CHAN_COUNT + 1U)
#define RTC0_PRETICK_SELECTED_CC_MASK BIT_MASK(NRF_RTC_CC_COUNT_MAX)
#if defined(CONFIG_SOC_NRF_GPIO_FORWARDER_FOR_NRF5340)
#define GPIOS_PSEL_BY_IDX(node_id, prop, idx) \
NRF_DT_GPIOS_TO_PSEL_BY_IDX(node_id, prop, idx),
#define ALL_GPIOS_IN_NODE(node_id) \
DT_FOREACH_PROP_ELEM(node_id, gpios, GPIOS_PSEL_BY_IDX)
#define ALL_GPIOS_IN_FORWARDER(node_id) \
DT_FOREACH_CHILD(node_id, ALL_GPIOS_IN_NODE)
#endif
#ifdef CONFIG_SOC_NRF5340_CPUAPP
#define LFXO_NODE DT_NODELABEL(lfxo)
#define HFXO_NODE DT_NODELABEL(hfxo)
/* LFXO config from DT */
#if DT_ENUM_HAS_VALUE(LFXO_NODE, load_capacitors, external)
#define LFXO_CAP NRF_OSCILLATORS_LFXO_CAP_EXTERNAL
#elif DT_ENUM_HAS_VALUE(LFXO_NODE, load_capacitors, internal)
#define LFXO_CAP (DT_ENUM_IDX(LFXO_NODE, load_capacitance_picofarad) + 1U)
#else
/* LFXO config from legacy Kconfig */
#if defined(CONFIG_SOC_LFXO_CAP_INT_6PF)
#define LFXO_CAP NRF_OSCILLATORS_LFXO_CAP_6PF
#elif defined(CONFIG_SOC_LFXO_CAP_INT_7PF)
#define LFXO_CAP NRF_OSCILLATORS_LFXO_CAP_7PF
#elif defined(CONFIG_SOC_LFXO_CAP_INT_9PF)
#define LFXO_CAP NRF_OSCILLATORS_LFXO_CAP_9PF
#else
#define LFXO_CAP NRF_OSCILLATORS_LFXO_CAP_EXTERNAL
#endif
#endif
/* HFXO config from DT */
#if DT_ENUM_HAS_VALUE(HFXO_NODE, load_capacitors, internal)
#define HFXO_CAP_VAL_X2 (DT_PROP(HFXO_NODE, load_capacitance_femtofarad)) * 2U / 1000U
#elif defined(CONFIG_SOC_HFXO_CAP_INTERNAL)
/* HFXO config from legacy Kconfig */
#define HFXO_CAP_VAL_X2 CONFIG_SOC_HFXO_CAP_INT_VALUE_X2
#endif
#endif /* CONFIG_SOC_NRF5340_CPUAPP */
#define LOG_LEVEL CONFIG_SOC_LOG_LEVEL
LOG_MODULE_REGISTER(soc);
#if defined(CONFIG_SOC_NRF53_ANOMALY_160_WORKAROUND)
/* This code prevents the CPU from entering sleep again if it already
* entered sleep 5 times within last 200 us.
*/
static bool nrf53_anomaly_160_check(void)
{
/* System clock cycles needed to cover 200 us window. */
const uint32_t window_cycles =
DIV_ROUND_UP(200 * CONFIG_SYS_CLOCK_HW_CYCLES_PER_SEC,
1000000);
static uint32_t timestamps[5];
static bool timestamps_filled;
static uint8_t current;
uint8_t oldest = (current + 1) % ARRAY_SIZE(timestamps);
uint32_t now = k_cycle_get_32();
if (timestamps_filled &&
/* + 1 because only fully elapsed cycles need to be counted. */
(now - timestamps[oldest]) < (window_cycles + 1)) {
return false;
}
/* Check if the CPU actually entered sleep since the last visit here
* (WFE/WFI could return immediately if the wake-up event was already
* registered).
*/
if (nrf_power_event_check(NRF_POWER, NRF_POWER_EVENT_SLEEPENTER)) {
nrf_power_event_clear(NRF_POWER, NRF_POWER_EVENT_SLEEPENTER);
/* If so, update the index at which the current timestamp is
* to be stored so that it replaces the oldest one, otherwise
* (when the CPU did not sleep), the recently stored timestamp
* is updated.
*/
current = oldest;
if (current == 0) {
timestamps_filled = true;
}
}
timestamps[current] = k_cycle_get_32();
return true;
}
#endif /* CONFIG_SOC_NRF53_ANOMALY_160_WORKAROUND */
#if defined(CONFIG_SOC_NRF53_RTC_PRETICK) && defined(CONFIG_SOC_NRF5340_CPUNET)
BUILD_ASSERT(!IS_ENABLED(CONFIG_WDT_NRFX),
"For CONFIG_SOC_NRF53_RTC_PRETICK watchdog is used internally for the pre-tick workaround on nRF5340 cpunet. Application cannot use the watchdog.");
static inline uint32_t rtc_counter_sub(uint32_t a, uint32_t b)
{
return (a - b) & NRF_RTC_COUNTER_MAX;
}
static bool rtc_ticks_to_next_event_get(NRF_RTC_Type *rtc, uint32_t selected_cc_mask, uint32_t cntr,
uint32_t *ticks_to_next_event)
{
bool result = false;
/* Let's preload register to speed-up. */
uint32_t reg_intenset = rtc->INTENSET;
/* Note: TICK event not handled. */
if (reg_intenset & NRF_RTC_INT_OVERFLOW_MASK) {
/* Overflow can generate an interrupt. */
*ticks_to_next_event = NRF_RTC_COUNTER_MAX + 1U - cntr;
result = true;
}
for (uint32_t chan = 0; chan < NRF_RTC_CC_COUNT_MAX; chan++) {
if ((selected_cc_mask & (1U << chan)) &&
(reg_intenset & NRF_RTC_CHANNEL_INT_MASK(chan))) {
/* The CC is in selected mask and is can generate an interrupt. */
uint32_t cc = nrf_rtc_cc_get(rtc, chan);
uint32_t ticks_to_fire = rtc_counter_sub(cc, cntr);
if (ticks_to_fire == 0U) {
/* When ticks_to_fire == 0, the event should have been just
* generated the interrupt can be already handled or be pending.
* However the next event is expected to be after counter wraps.
*/
ticks_to_fire = NRF_RTC_COUNTER_MAX + 1U;
}
if (!result) {
*ticks_to_next_event = ticks_to_fire;
result = true;
} else if (ticks_to_fire < *ticks_to_next_event) {
*ticks_to_next_event = ticks_to_fire;
result = true;
} else {
/* CC that fires no earlier than already found. */
}
}
}
return result;
}
static void rtc_counter_synchronized_get(NRF_RTC_Type *rtc_a, NRF_RTC_Type *rtc_b,
uint32_t *counter_a, uint32_t *counter_b)
{
do {
*counter_a = nrf_rtc_counter_get(rtc_a);
barrier_dmem_fence_full();
*counter_b = nrf_rtc_counter_get(rtc_b);
barrier_dmem_fence_full();
} while (*counter_a != nrf_rtc_counter_get(rtc_a));
}
static uint8_t cpu_idle_prepare_monitor_dummy;
static bool cpu_idle_prepare_allows_sleep;
static void cpu_idle_prepare_monitor_begin(void)
{
__LDREXB(&cpu_idle_prepare_monitor_dummy);
}
/* Returns 0 if no exception preempted since the last call to cpu_idle_prepare_monitor_begin. */
static bool cpu_idle_prepare_monitor_end(void)
{
/* The value stored is irrelevant. If any exception took place after
* cpu_idle_prepare_monitor_begin, the local monitor is cleared and
* the store fails returning 1.
* See Arm v8-M Architecture Reference Manual:
* Chapter B9.2 The local monitors
* Chapter B9.4 Exclusive access instructions and the monitors
* See Arm Cortex-M33 Processor Technical Reference Manual
* Chapter 3.5 Exclusive monitor
*/
return __STREXB(0U, &cpu_idle_prepare_monitor_dummy);
}
static void rtc_pretick_finish_previous(void)
{
NRF_IPC->PUBLISH_RECEIVE[CONFIG_SOC_NRF53_RTC_PRETICK_IPC_CH_TO_NET] &=
~IPC_PUBLISH_RECEIVE_EN_Msk;
nrf_rtc_event_clear(NRF_RTC1, NRF_RTC_CHANNEL_EVENT_ADDR(RTC1_PRETICK_CC_CHAN));
}
void z_arm_on_enter_cpu_idle_prepare(void)
{
bool ok_to_sleep = true;
cpu_idle_prepare_monitor_begin();
uint32_t rtc_counter = 0U;
uint32_t rtc_ticks_to_next_event = 0U;
uint32_t rtc0_counter = 0U;
uint32_t rtc0_ticks_to_next_event = 0U;
rtc_counter_synchronized_get(NRF_RTC1, NRF_RTC0, &rtc_counter, &rtc0_counter);
bool rtc_scheduled = rtc_ticks_to_next_event_get(NRF_RTC1, RTC1_PRETICK_SELECTED_CC_MASK,
rtc_counter, &rtc_ticks_to_next_event);
if (rtc_ticks_to_next_event_get(NRF_RTC0, RTC0_PRETICK_SELECTED_CC_MASK, rtc0_counter,
&rtc0_ticks_to_next_event)) {
/* An event is scheduled on RTC0. */
if (!rtc_scheduled) {
rtc_ticks_to_next_event = rtc0_ticks_to_next_event;
rtc_scheduled = true;
} else if (rtc0_ticks_to_next_event < rtc_ticks_to_next_event) {
rtc_ticks_to_next_event = rtc0_ticks_to_next_event;
} else {
/* Event on RTC0 will not happen earlier than already found. */
}
}
if (rtc_scheduled) {
static bool rtc_pretick_cc_set_on_time;
/* The pretick should happen 1 tick before the earliest scheduled event
* that can trigger an interrupt.
*/
uint32_t rtc_pretick_cc_val = (rtc_counter + rtc_ticks_to_next_event - 1U)
& NRF_RTC_COUNTER_MAX;
if (rtc_pretick_cc_val != nrf_rtc_cc_get(NRF_RTC1, RTC1_PRETICK_CC_CHAN)) {
/* The CC for pretick needs to be updated. */
rtc_pretick_finish_previous();
nrf_rtc_cc_set(NRF_RTC1, RTC1_PRETICK_CC_CHAN, rtc_pretick_cc_val);
if (rtc_ticks_to_next_event >= NRF_RTC_COUNTER_MAX/2) {
/* Pretick is scheduled so far in the future, assumed on time. */
rtc_pretick_cc_set_on_time = true;
} else {
/* Let's check if we updated CC on time, so that the CC can
* take effect.
*/
barrier_dmem_fence_full();
rtc_counter = nrf_rtc_counter_get(NRF_RTC1);
uint32_t pretick_cc_to_counter =
rtc_counter_sub(rtc_pretick_cc_val, rtc_counter);
if ((pretick_cc_to_counter < 3) ||
(pretick_cc_to_counter >= NRF_RTC_COUNTER_MAX/2)) {
/* The COUNTER value is close enough to the expected
* pretick CC or has just expired, so the pretick event
* generation is not guaranteed.
*/
rtc_pretick_cc_set_on_time = false;
} else {
/* The written rtc_pretick_cc is guaranteed to trigger
* compare event.
*/
rtc_pretick_cc_set_on_time = true;
}
}
} else {
/* The CC for pretick doesn't need to be updated, however
* rtc_pretick_cc_set_on_time still holds if we managed to set it on time.
*/
}
/* If the CC for pretick is set on time, so the pretick CC event can be reliably
* generated then allow to sleep. Otherwise (the CC for pretick cannot be reliably
* generated, because CC was set very short to it's fire time) sleep not at all.
*/
ok_to_sleep = rtc_pretick_cc_set_on_time;
} else {
/* No events on any RTC timers are scheduled. */
}
if (ok_to_sleep) {
NRF_IPC->PUBLISH_RECEIVE[CONFIG_SOC_NRF53_RTC_PRETICK_IPC_CH_TO_NET] |=
IPC_PUBLISH_RECEIVE_EN_Msk;
if (!nrf_rtc_event_check(NRF_RTC1,
NRF_RTC_CHANNEL_EVENT_ADDR(RTC1_PRETICK_CC_CHAN))) {
NRF_WDT->TASKS_STOP = 1;
/* Check if any event did not occur after we checked for
* stopping condition. If yes, we might have stopped WDT
* when it should be running. Restart it.
*/
if (nrf_rtc_event_check(NRF_RTC1,
NRF_RTC_CHANNEL_EVENT_ADDR(RTC1_PRETICK_CC_CHAN))) {
NRF_WDT->TASKS_START = 1;
}
}
}
cpu_idle_prepare_allows_sleep = ok_to_sleep;
}
#endif /* CONFIG_SOC_NRF53_RTC_PRETICK && CONFIG_SOC_NRF5340_CPUNET */
#if defined(CONFIG_SOC_NRF53_ANOMALY_160_WORKAROUND) || \
(defined(CONFIG_SOC_NRF53_RTC_PRETICK) && defined(CONFIG_SOC_NRF5340_CPUNET))
bool z_arm_on_enter_cpu_idle(void)
{
bool ok_to_sleep = true;
#if defined(CONFIG_SOC_NRF53_RTC_PRETICK) && defined(CONFIG_SOC_NRF5340_CPUNET)
if (cpu_idle_prepare_monitor_end() == 0) {
/* No exception happened since cpu_idle_prepare_monitor_begin.
* We can trust the outcome of. z_arm_on_enter_cpu_idle_prepare
*/
ok_to_sleep = cpu_idle_prepare_allows_sleep;
} else {
/* Exception happened since cpu_idle_prepare_monitor_begin.
* The values which z_arm_on_enter_cpu_idle_prepare could be changed
* by the exception, so we can not trust to it's outcome.
* Do not sleep at all, let's try in the next iteration of idle loop.
*/
ok_to_sleep = false;
}
#endif
#if defined(CONFIG_SOC_NRF53_ANOMALY_160_WORKAROUND)
if (ok_to_sleep) {
ok_to_sleep = nrf53_anomaly_160_check();
#if (LOG_LEVEL >= LOG_LEVEL_DBG)
static bool suppress_message;
if (ok_to_sleep) {
suppress_message = false;
} else if (!suppress_message) {
LOG_DBG("Anomaly 160 trigger conditions detected.");
suppress_message = true;
}
#endif
}
#endif /* CONFIG_SOC_NRF53_ANOMALY_160_WORKAROUND */
#if defined(CONFIG_SOC_NRF53_RTC_PRETICK) && defined(CONFIG_SOC_NRF5340_CPUNET)
if (!ok_to_sleep) {
NRF_IPC->PUBLISH_RECEIVE[CONFIG_SOC_NRF53_RTC_PRETICK_IPC_CH_TO_NET] &=
~IPC_PUBLISH_RECEIVE_EN_Msk;
NRF_WDT->TASKS_STOP = 1;
}
#endif
return ok_to_sleep;
}
#endif /* CONFIG_SOC_NRF53_ANOMALY_160_WORKAROUND ||
* (CONFIG_SOC_NRF53_RTC_PRETICK && CONFIG_SOC_NRF5340_CPUNET)
*/
#if CONFIG_SOC_NRF53_RTC_PRETICK
#ifdef CONFIG_SOC_NRF5340_CPUAPP
/* RTC pretick - application core part. */
static int rtc_pretick_cpuapp_init(void)
{
uint8_t ch;
nrfx_err_t err;
nrf_ipc_event_t ipc_event =
nrf_ipc_receive_event_get(CONFIG_SOC_NRF53_RTC_PRETICK_IPC_CH_FROM_NET);
nrf_ipc_task_t ipc_task =
nrf_ipc_send_task_get(CONFIG_SOC_NRF53_RTC_PRETICK_IPC_CH_TO_NET);
uint32_t task_ipc = nrf_ipc_task_address_get(NRF_IPC, ipc_task);
uint32_t evt_ipc = nrf_ipc_event_address_get(NRF_IPC, ipc_event);
err = nrfx_gppi_channel_alloc(&ch);
if (err != NRFX_SUCCESS) {
return -ENOMEM;
}
nrf_ipc_receive_config_set(NRF_IPC, CONFIG_SOC_NRF53_RTC_PRETICK_IPC_CH_FROM_NET,
BIT(CONFIG_SOC_NRF53_RTC_PRETICK_IPC_CH_FROM_NET));
nrf_ipc_send_config_set(NRF_IPC, CONFIG_SOC_NRF53_RTC_PRETICK_IPC_CH_TO_NET,
BIT(CONFIG_SOC_NRF53_RTC_PRETICK_IPC_CH_TO_NET));
nrfx_gppi_task_endpoint_setup(ch, task_ipc);
nrfx_gppi_event_endpoint_setup(ch, evt_ipc);
nrfx_gppi_channels_enable(BIT(ch));
return 0;
}
#else /* CONFIG_SOC_NRF5340_CPUNET */
void rtc_pretick_rtc0_isr_hook(void)
{
rtc_pretick_finish_previous();
}
void rtc_pretick_rtc1_isr_hook(void)
{
rtc_pretick_finish_previous();
}
static int rtc_pretick_cpunet_init(void)
{
uint8_t ppi_ch;
nrf_ipc_task_t ipc_task =
nrf_ipc_send_task_get(CONFIG_SOC_NRF53_RTC_PRETICK_IPC_CH_FROM_NET);
nrf_ipc_event_t ipc_event =
nrf_ipc_receive_event_get(CONFIG_SOC_NRF53_RTC_PRETICK_IPC_CH_TO_NET);
uint32_t task_ipc = nrf_ipc_task_address_get(NRF_IPC, ipc_task);
uint32_t evt_ipc = nrf_ipc_event_address_get(NRF_IPC, ipc_event);
uint32_t task_wdt = nrf_wdt_task_address_get(NRF_WDT, NRF_WDT_TASK_START);
uint32_t evt_cc = nrf_rtc_event_address_get(NRF_RTC1,
NRF_RTC_CHANNEL_EVENT_ADDR(RTC1_PRETICK_CC_CHAN));
/* Configure Watchdog to allow stopping. */
nrf_wdt_behaviour_set(NRF_WDT, WDT_CONFIG_STOPEN_Msk | BIT(4));
*((volatile uint32_t *)0x41203120) = 0x14;
/* Configure IPC */
nrf_ipc_receive_config_set(NRF_IPC, CONFIG_SOC_NRF53_RTC_PRETICK_IPC_CH_TO_NET,
BIT(CONFIG_SOC_NRF53_RTC_PRETICK_IPC_CH_TO_NET));
nrf_ipc_send_config_set(NRF_IPC, CONFIG_SOC_NRF53_RTC_PRETICK_IPC_CH_FROM_NET,
BIT(CONFIG_SOC_NRF53_RTC_PRETICK_IPC_CH_FROM_NET));
/* Allocate PPI channel for RTC Compare event publishers that starts WDT. */
nrfx_err_t err = nrfx_gppi_channel_alloc(&ppi_ch);
if (err != NRFX_SUCCESS) {
return -ENOMEM;
}
nrfx_gppi_event_endpoint_setup(ppi_ch, evt_cc);
nrfx_gppi_task_endpoint_setup(ppi_ch, task_ipc);
nrfx_gppi_event_endpoint_setup(ppi_ch, evt_ipc);
nrfx_gppi_task_endpoint_setup(ppi_ch, task_wdt);
nrfx_gppi_channels_enable(BIT(ppi_ch));
nrf_rtc_event_enable(NRF_RTC1, NRF_RTC_CHANNEL_INT_MASK(RTC1_PRETICK_CC_CHAN));
nrf_rtc_event_clear(NRF_RTC1, NRF_RTC_CHANNEL_EVENT_ADDR(RTC1_PRETICK_CC_CHAN));
return 0;
}
#endif /* CONFIG_SOC_NRF5340_CPUNET */
static int rtc_pretick_init(void)
{
#ifdef CONFIG_SOC_NRF5340_CPUAPP
return rtc_pretick_cpuapp_init();
#else
return rtc_pretick_cpunet_init();
#endif
}
#endif /* CONFIG_SOC_NRF53_RTC_PRETICK */
static int nordicsemi_nrf53_init(void)
{
#if defined(CONFIG_SOC_NRF5340_CPUAPP) && defined(CONFIG_NRF_ENABLE_CACHE)
#if !defined(CONFIG_BUILD_WITH_TFM)
/* Enable the instruction & data cache.
* This can only be done from secure code.
* This is handled by the TF-M platform so we skip it when TF-M is
* enabled.
*/
nrf_cache_enable(NRF_CACHE);
#endif
#elif defined(CONFIG_SOC_NRF5340_CPUNET) && defined(CONFIG_NRF_ENABLE_CACHE)
nrf_nvmc_icache_config_set(NRF_NVMC, NRF_NVMC_ICACHE_ENABLE);
#endif
#ifdef CONFIG_SOC_NRF5340_CPUAPP
#if defined(LFXO_CAP)
nrf_oscillators_lfxo_cap_set(NRF_OSCILLATORS, LFXO_CAP);
#if !defined(CONFIG_BUILD_WITH_TFM)
/* This can only be done from secure code.
* This is handled by the TF-M platform so we skip it when TF-M is
* enabled.
*/
nrf_gpio_pin_control_select(PIN_XL1, NRF_GPIO_PIN_SEL_PERIPHERAL);
nrf_gpio_pin_control_select(PIN_XL2, NRF_GPIO_PIN_SEL_PERIPHERAL);
#endif /* !defined(CONFIG_BUILD_WITH_TFM) */
#endif /* defined(LFXO_CAP) */
#if defined(HFXO_CAP_VAL_X2)
/* This register is only accessible from secure code. */
uint32_t xosc32mtrim = soc_secure_read_xosc32mtrim();
/* The SLOPE field is in the two's complement form, hence this special
* handling. Ideally, it would result in just one SBFX instruction for
* extracting the slope value, at least gcc is capable of producing such
* output, but since the compiler apparently tries first to optimize
* additions and subtractions, it generates slightly less than optimal
* code.
*/
uint32_t slope_field = (xosc32mtrim & FICR_XOSC32MTRIM_SLOPE_Msk)
>> FICR_XOSC32MTRIM_SLOPE_Pos;
uint32_t slope_mask = FICR_XOSC32MTRIM_SLOPE_Msk
>> FICR_XOSC32MTRIM_SLOPE_Pos;
uint32_t slope_sign = (slope_mask - (slope_mask >> 1));
int32_t slope = (int32_t)(slope_field ^ slope_sign) - (int32_t)slope_sign;
uint32_t offset = (xosc32mtrim & FICR_XOSC32MTRIM_OFFSET_Msk)
>> FICR_XOSC32MTRIM_OFFSET_Pos;
/* As specified in the nRF5340 PS:
* CAPVALUE = (((FICR->XOSC32MTRIM.SLOPE+56)*(CAPACITANCE*2-14))
* +((FICR->XOSC32MTRIM.OFFSET-8)<<4)+32)>>6;
* where CAPACITANCE is the desired capacitor value in pF, holding any
* value between 7.0 pF and 20.0 pF in 0.5 pF steps.
*/
uint32_t capvalue =
((slope + 56) * (HFXO_CAP_VAL_X2 - 14)
+ ((offset - 8) << 4) + 32) >> 6;
nrf_oscillators_hfxo_cap_set(NRF_OSCILLATORS, true, capvalue);
#elif defined(CONFIG_SOC_HFXO_CAP_EXTERNAL) || \
DT_ENUM_HAS_VALUE(HFXO_NODE, load_capacitors, external)
nrf_oscillators_hfxo_cap_set(NRF_OSCILLATORS, false, 0);
#endif
#endif /* CONFIG_SOC_NRF5340_CPUAPP */
#if defined(CONFIG_SOC_DCDC_NRF53X_APP) || \
(DT_PROP(DT_NODELABEL(vregmain), regulator_initial_mode) == NRF5X_REG_MODE_DCDC)
nrf_regulators_vreg_enable_set(NRF_REGULATORS, NRF_REGULATORS_VREG_MAIN, true);
#endif
#if defined(CONFIG_SOC_DCDC_NRF53X_NET) || \
(DT_PROP(DT_NODELABEL(vregradio), regulator_initial_mode) == NRF5X_REG_MODE_DCDC)
nrf_regulators_vreg_enable_set(NRF_REGULATORS, NRF_REGULATORS_VREG_RADIO, true);
#endif
#if defined(CONFIG_SOC_DCDC_NRF53X_HV) || DT_NODE_HAS_STATUS_OKAY(DT_NODELABEL(vregh))
nrf_regulators_vreg_enable_set(NRF_REGULATORS, NRF_REGULATORS_VREG_HIGH, true);
#endif
#if defined(CONFIG_SOC_NRF_GPIO_FORWARDER_FOR_NRF5340)
static const uint8_t forwarded_psels[] = {
DT_FOREACH_STATUS_OKAY(nordic_nrf_gpio_forwarder, ALL_GPIOS_IN_FORWARDER)
};
for (int i = 0; i < ARRAY_SIZE(forwarded_psels); i++) {
soc_secure_gpio_pin_mcu_select(forwarded_psels[i], NRF_GPIO_PIN_SEL_NETWORK);
}
#endif
return 0;
}
void arch_busy_wait(uint32_t time_us)
{
nrfx_coredep_delay_us(time_us);
}
SYS_INIT(nordicsemi_nrf53_init, PRE_KERNEL_1, 0);
#ifdef CONFIG_SOC_NRF53_RTC_PRETICK
SYS_INIT(rtc_pretick_init, POST_KERNEL, 0);
#endif