605 lines
19 KiB
C
605 lines
19 KiB
C
/*
|
|
* Copyright (c) 2023 Antmicro <www.antmicro.com>
|
|
* Copyright (c) 2023 Ambiq Micro Inc. <www.ambiq.com>
|
|
*
|
|
* SPDX-License-Identifier: Apache-2.0
|
|
*/
|
|
|
|
#define DT_DRV_COMPAT ambiq_gpio_bank
|
|
|
|
#include <errno.h>
|
|
#include <zephyr/drivers/gpio.h>
|
|
#include <zephyr/kernel.h>
|
|
#include <zephyr/drivers/gpio/gpio_utils.h>
|
|
#include <zephyr/irq.h>
|
|
#include <zephyr/spinlock.h>
|
|
|
|
#include <am_mcu_apollo.h>
|
|
|
|
typedef void (*ambiq_gpio_cfg_func_t)(void);
|
|
|
|
struct ambiq_gpio_config {
|
|
struct gpio_driver_config common;
|
|
uint32_t base;
|
|
uint32_t offset;
|
|
uint32_t irq_num;
|
|
ambiq_gpio_cfg_func_t cfg_func;
|
|
uint8_t ngpios;
|
|
};
|
|
|
|
struct ambiq_gpio_data {
|
|
struct gpio_driver_data common;
|
|
sys_slist_t cb;
|
|
struct k_spinlock lock;
|
|
};
|
|
|
|
static int ambiq_gpio_pin_configure(const struct device *dev, gpio_pin_t pin, gpio_flags_t flags)
|
|
{
|
|
const struct ambiq_gpio_config *const dev_cfg = dev->config;
|
|
int ret = 0;
|
|
|
|
#if defined(CONFIG_SOC_SERIES_APOLLO3X)
|
|
pin += dev_cfg->offset;
|
|
|
|
am_hal_gpio_pincfg_t pincfg = g_AM_HAL_GPIO_DEFAULT;
|
|
|
|
if (flags & GPIO_INPUT) {
|
|
pincfg = g_AM_HAL_GPIO_INPUT;
|
|
if (flags & GPIO_PULL_UP) {
|
|
pincfg.ePullup = AM_HAL_GPIO_PIN_PULLUP_1_5K;
|
|
} else if (flags & GPIO_PULL_DOWN) {
|
|
pincfg.ePullup = AM_HAL_GPIO_PIN_PULLDOWN;
|
|
}
|
|
}
|
|
if (flags & GPIO_OUTPUT) {
|
|
if (flags & GPIO_SINGLE_ENDED) {
|
|
if (flags & GPIO_LINE_OPEN_DRAIN) {
|
|
pincfg.eGPOutcfg = AM_HAL_GPIO_PIN_OUTCFG_OPENDRAIN;
|
|
if (flags & GPIO_PULL_UP) {
|
|
pincfg.ePullup = AM_HAL_GPIO_PIN_PULLUP_1_5K;
|
|
} else if (flags & GPIO_PULL_DOWN) {
|
|
pincfg.ePullup = AM_HAL_GPIO_PIN_PULLDOWN;
|
|
}
|
|
}
|
|
} else {
|
|
pincfg.eGPOutcfg = AM_HAL_GPIO_PIN_OUTCFG_PUSHPULL;
|
|
}
|
|
}
|
|
if (flags & GPIO_DISCONNECTED) {
|
|
pincfg = g_AM_HAL_GPIO_DEFAULT;
|
|
}
|
|
|
|
if (flags & GPIO_OUTPUT_INIT_HIGH) {
|
|
pincfg.eCEpol = AM_HAL_GPIO_PIN_CEPOL_ACTIVEHIGH;
|
|
am_hal_gpio_state_write(pin, AM_HAL_GPIO_OUTPUT_SET);
|
|
|
|
} else if (flags & GPIO_OUTPUT_INIT_LOW) {
|
|
pincfg.eCEpol = AM_HAL_GPIO_PIN_CEPOL_ACTIVELOW;
|
|
am_hal_gpio_state_write(pin, AM_HAL_GPIO_OUTPUT_CLEAR);
|
|
}
|
|
#else
|
|
pin += (dev_cfg->offset >> 2);
|
|
|
|
am_hal_gpio_pincfg_t pincfg = am_hal_gpio_pincfg_default;
|
|
|
|
if (flags & GPIO_INPUT) {
|
|
pincfg = am_hal_gpio_pincfg_input;
|
|
if (flags & GPIO_PULL_UP) {
|
|
pincfg.GP.cfg_b.ePullup = AM_HAL_GPIO_PIN_PULLUP_50K;
|
|
} else if (flags & GPIO_PULL_DOWN) {
|
|
pincfg.GP.cfg_b.ePullup = AM_HAL_GPIO_PIN_PULLDOWN_50K;
|
|
}
|
|
}
|
|
if (flags & GPIO_OUTPUT) {
|
|
if (flags & GPIO_SINGLE_ENDED) {
|
|
if (flags & GPIO_LINE_OPEN_DRAIN) {
|
|
pincfg.GP.cfg_b.eGPOutCfg = AM_HAL_GPIO_PIN_OUTCFG_OPENDRAIN;
|
|
if (flags & GPIO_PULL_UP) {
|
|
pincfg.GP.cfg_b.ePullup = AM_HAL_GPIO_PIN_PULLUP_50K;
|
|
} else if (flags & GPIO_PULL_DOWN) {
|
|
pincfg.GP.cfg_b.ePullup = AM_HAL_GPIO_PIN_PULLDOWN_50K;
|
|
}
|
|
}
|
|
} else {
|
|
pincfg.GP.cfg_b.eGPOutCfg = AM_HAL_GPIO_PIN_OUTCFG_PUSHPULL;
|
|
}
|
|
}
|
|
if (flags & GPIO_DISCONNECTED) {
|
|
pincfg = am_hal_gpio_pincfg_disabled;
|
|
}
|
|
|
|
if (flags & GPIO_OUTPUT_INIT_HIGH) {
|
|
pincfg.GP.cfg_b.eCEpol = AM_HAL_GPIO_PIN_CEPOL_ACTIVEHIGH;
|
|
am_hal_gpio_state_write(pin, AM_HAL_GPIO_OUTPUT_SET);
|
|
|
|
} else if (flags & GPIO_OUTPUT_INIT_LOW) {
|
|
pincfg.GP.cfg_b.eCEpol = AM_HAL_GPIO_PIN_CEPOL_ACTIVELOW;
|
|
am_hal_gpio_state_write(pin, AM_HAL_GPIO_OUTPUT_CLEAR);
|
|
}
|
|
#endif
|
|
|
|
if (am_hal_gpio_pinconfig(pin, pincfg) != AM_HAL_STATUS_SUCCESS) {
|
|
ret = -ENOTSUP;
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
#ifdef CONFIG_GPIO_GET_CONFIG
|
|
static int ambiq_gpio_get_config(const struct device *dev, gpio_pin_t pin, gpio_flags_t *out_flags)
|
|
{
|
|
const struct ambiq_gpio_config *const dev_cfg = dev->config;
|
|
am_hal_gpio_pincfg_t pincfg;
|
|
|
|
#if defined(CONFIG_SOC_SERIES_APOLLO3X)
|
|
pin += dev_cfg->offset;
|
|
|
|
am_hal_gpio_pinconfig_get(pin, &pincfg);
|
|
|
|
if (pincfg.eGPOutcfg == AM_HAL_GPIO_PIN_OUTCFG_DISABLE &&
|
|
pincfg.eGPInput == AM_HAL_GPIO_PIN_INPUT_NONE) {
|
|
*out_flags = GPIO_DISCONNECTED;
|
|
}
|
|
if (pincfg.eGPInput == AM_HAL_GPIO_PIN_INPUT_ENABLE) {
|
|
*out_flags = GPIO_INPUT;
|
|
if (pincfg.ePullup == AM_HAL_GPIO_PIN_PULLUP_1_5K) {
|
|
*out_flags |= GPIO_PULL_UP;
|
|
} else if (pincfg.ePullup == AM_HAL_GPIO_PIN_PULLDOWN) {
|
|
*out_flags |= GPIO_PULL_DOWN;
|
|
}
|
|
}
|
|
if (pincfg.eGPOutcfg == AM_HAL_GPIO_PIN_OUTCFG_PUSHPULL) {
|
|
*out_flags = GPIO_OUTPUT | GPIO_PUSH_PULL;
|
|
if (pincfg.eCEpol == AM_HAL_GPIO_PIN_CEPOL_ACTIVEHIGH) {
|
|
*out_flags |= GPIO_OUTPUT_HIGH;
|
|
} else if (pincfg.eCEpol == AM_HAL_GPIO_PIN_CEPOL_ACTIVELOW) {
|
|
*out_flags |= GPIO_OUTPUT_LOW;
|
|
}
|
|
}
|
|
if (pincfg.eGPOutcfg == AM_HAL_GPIO_PIN_OUTCFG_OPENDRAIN) {
|
|
*out_flags = GPIO_OUTPUT | GPIO_OPEN_DRAIN;
|
|
if (pincfg.eCEpol == AM_HAL_GPIO_PIN_CEPOL_ACTIVEHIGH) {
|
|
*out_flags |= GPIO_OUTPUT_HIGH;
|
|
} else if (pincfg.eCEpol == AM_HAL_GPIO_PIN_CEPOL_ACTIVELOW) {
|
|
*out_flags |= GPIO_OUTPUT_LOW;
|
|
}
|
|
}
|
|
#else
|
|
pin += (dev_cfg->offset >> 2);
|
|
|
|
am_hal_gpio_pinconfig_get(pin, &pincfg);
|
|
|
|
if (pincfg.GP.cfg_b.eGPOutCfg == AM_HAL_GPIO_PIN_OUTCFG_DISABLE &&
|
|
pincfg.GP.cfg_b.eGPInput == AM_HAL_GPIO_PIN_INPUT_NONE) {
|
|
*out_flags = GPIO_DISCONNECTED;
|
|
}
|
|
if (pincfg.GP.cfg_b.eGPInput == AM_HAL_GPIO_PIN_INPUT_ENABLE) {
|
|
*out_flags = GPIO_INPUT;
|
|
if (pincfg.GP.cfg_b.ePullup == AM_HAL_GPIO_PIN_PULLUP_50K) {
|
|
*out_flags |= GPIO_PULL_UP;
|
|
} else if (pincfg.GP.cfg_b.ePullup == AM_HAL_GPIO_PIN_PULLDOWN_50K) {
|
|
*out_flags |= GPIO_PULL_DOWN;
|
|
}
|
|
}
|
|
if (pincfg.GP.cfg_b.eGPOutCfg == AM_HAL_GPIO_PIN_OUTCFG_PUSHPULL) {
|
|
*out_flags = GPIO_OUTPUT | GPIO_PUSH_PULL;
|
|
if (pincfg.GP.cfg_b.eCEpol == AM_HAL_GPIO_PIN_CEPOL_ACTIVEHIGH) {
|
|
*out_flags |= GPIO_OUTPUT_HIGH;
|
|
} else if (pincfg.GP.cfg_b.eCEpol == AM_HAL_GPIO_PIN_CEPOL_ACTIVELOW) {
|
|
*out_flags |= GPIO_OUTPUT_LOW;
|
|
}
|
|
}
|
|
if (pincfg.GP.cfg_b.eGPOutCfg == AM_HAL_GPIO_PIN_OUTCFG_OPENDRAIN) {
|
|
*out_flags = GPIO_OUTPUT | GPIO_OPEN_DRAIN;
|
|
if (pincfg.GP.cfg_b.eCEpol == AM_HAL_GPIO_PIN_CEPOL_ACTIVEHIGH) {
|
|
*out_flags |= GPIO_OUTPUT_HIGH;
|
|
} else if (pincfg.GP.cfg_b.eCEpol == AM_HAL_GPIO_PIN_CEPOL_ACTIVELOW) {
|
|
*out_flags |= GPIO_OUTPUT_LOW;
|
|
}
|
|
}
|
|
#endif
|
|
return 0;
|
|
}
|
|
#endif
|
|
|
|
#ifdef CONFIG_GPIO_GET_DIRECTION
|
|
static int ambiq_gpio_port_get_direction(const struct device *dev, gpio_port_pins_t map,
|
|
gpio_port_pins_t *inputs, gpio_port_pins_t *outputs)
|
|
{
|
|
const struct ambiq_gpio_config *const dev_cfg = dev->config;
|
|
am_hal_gpio_pincfg_t pincfg;
|
|
gpio_port_pins_t ip = 0;
|
|
gpio_port_pins_t op = 0;
|
|
#if defined(CONFIG_SOC_SERIES_APOLLO3X)
|
|
uint32_t pin_offset = dev_cfg->offset;
|
|
|
|
if (inputs != NULL) {
|
|
for (int i = 0; i < dev_cfg->ngpios; i++) {
|
|
if ((map >> i) & 1) {
|
|
am_hal_gpio_pinconfig_get(i + pin_offset, &pincfg);
|
|
if (pincfg.eGPInput == AM_HAL_GPIO_PIN_INPUT_ENABLE) {
|
|
ip |= BIT(i);
|
|
}
|
|
}
|
|
}
|
|
*inputs = ip;
|
|
}
|
|
if (outputs != NULL) {
|
|
for (int i = 0; i < dev_cfg->ngpios; i++) {
|
|
if ((map >> i) & 1) {
|
|
am_hal_gpio_pinconfig_get(i + pin_offset, &pincfg);
|
|
if (pincfg.eGPOutcfg == AM_HAL_GPIO_PIN_OUTCFG_PUSHPULL ||
|
|
pincfg.eGPOutcfg == AM_HAL_GPIO_PIN_OUTCFG_OPENDRAIN) {
|
|
op |= BIT(i);
|
|
}
|
|
}
|
|
}
|
|
*outputs = op;
|
|
}
|
|
#else
|
|
uint32_t pin_offset = dev_cfg->offset >> 2;
|
|
|
|
if (inputs != NULL) {
|
|
for (int i = 0; i < dev_cfg->ngpios; i++) {
|
|
if ((map >> i) & 1) {
|
|
am_hal_gpio_pinconfig_get(i + pin_offset, &pincfg);
|
|
if (pincfg.GP.cfg_b.eGPInput == AM_HAL_GPIO_PIN_INPUT_ENABLE) {
|
|
ip |= BIT(i);
|
|
}
|
|
}
|
|
}
|
|
*inputs = ip;
|
|
}
|
|
if (outputs != NULL) {
|
|
for (int i = 0; i < dev_cfg->ngpios; i++) {
|
|
if ((map >> i) & 1) {
|
|
am_hal_gpio_pinconfig_get(i + pin_offset, &pincfg);
|
|
if (pincfg.GP.cfg_b.eGPOutCfg == AM_HAL_GPIO_PIN_OUTCFG_PUSHPULL ||
|
|
pincfg.GP.cfg_b.eGPOutCfg == AM_HAL_GPIO_PIN_OUTCFG_OPENDRAIN) {
|
|
op |= BIT(i);
|
|
}
|
|
}
|
|
}
|
|
*outputs = op;
|
|
}
|
|
#endif
|
|
return 0;
|
|
}
|
|
#endif
|
|
|
|
static int ambiq_gpio_port_get_raw(const struct device *dev, gpio_port_value_t *value)
|
|
{
|
|
const struct ambiq_gpio_config *const dev_cfg = dev->config;
|
|
uint32_t pin_offset;
|
|
|
|
#if defined(CONFIG_SOC_SERIES_APOLLO3X)
|
|
pin_offset = dev_cfg->offset;
|
|
#else
|
|
pin_offset = dev_cfg->offset >> 2;
|
|
#endif
|
|
*value = (*AM_HAL_GPIO_RDn(pin_offset)) | (*AM_HAL_GPIO_WTn(pin_offset));
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int ambiq_gpio_port_set_masked_raw(const struct device *dev, gpio_port_pins_t mask,
|
|
gpio_port_value_t value)
|
|
{
|
|
const struct ambiq_gpio_config *const dev_cfg = dev->config;
|
|
#if defined(CONFIG_SOC_SERIES_APOLLO3X)
|
|
uint32_t pin_offset = dev_cfg->offset;
|
|
#else
|
|
uint32_t pin_offset = dev_cfg->offset >> 2;
|
|
#endif
|
|
for (int i = 0; i < dev_cfg->ngpios; i++) {
|
|
if ((mask >> i) & 1) {
|
|
am_hal_gpio_state_write(i + pin_offset, ((value >> i) & 1));
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int ambiq_gpio_port_set_bits_raw(const struct device *dev, gpio_port_pins_t pins)
|
|
{
|
|
const struct ambiq_gpio_config *const dev_cfg = dev->config;
|
|
#if defined(CONFIG_SOC_SERIES_APOLLO3X)
|
|
uint32_t pin_offset = dev_cfg->offset;
|
|
#else
|
|
uint32_t pin_offset = dev_cfg->offset >> 2;
|
|
#endif
|
|
|
|
for (int i = 0; i < dev_cfg->ngpios; i++) {
|
|
if ((pins >> i) & 1) {
|
|
am_hal_gpio_state_write(i + pin_offset, AM_HAL_GPIO_OUTPUT_SET);
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int ambiq_gpio_port_clear_bits_raw(const struct device *dev, gpio_port_pins_t pins)
|
|
{
|
|
const struct ambiq_gpio_config *const dev_cfg = dev->config;
|
|
#if defined(CONFIG_SOC_SERIES_APOLLO3X)
|
|
uint32_t pin_offset = dev_cfg->offset;
|
|
#else
|
|
uint32_t pin_offset = dev_cfg->offset >> 2;
|
|
#endif
|
|
|
|
for (int i = 0; i < dev_cfg->ngpios; i++) {
|
|
if ((pins >> i) & 1) {
|
|
am_hal_gpio_state_write(i + pin_offset, AM_HAL_GPIO_OUTPUT_CLEAR);
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int ambiq_gpio_port_toggle_bits(const struct device *dev, gpio_port_pins_t pins)
|
|
{
|
|
const struct ambiq_gpio_config *const dev_cfg = dev->config;
|
|
#if defined(CONFIG_SOC_SERIES_APOLLO3X)
|
|
uint32_t pin_offset = dev_cfg->offset;
|
|
#else
|
|
uint32_t pin_offset = dev_cfg->offset >> 2;
|
|
#endif
|
|
|
|
for (int i = 0; i < dev_cfg->ngpios; i++) {
|
|
if ((pins >> i) & 1) {
|
|
am_hal_gpio_state_write(i + pin_offset, AM_HAL_GPIO_OUTPUT_TOGGLE);
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
#define APOLLO3_HANDLE_SHARED_GPIO_IRQ(n) \
|
|
static const struct device *const dev_##n = DEVICE_DT_INST_GET(n); \
|
|
const struct ambiq_gpio_config *cfg_##n = dev_##n->config; \
|
|
struct ambiq_gpio_data *const data_##n = dev_##n->data; \
|
|
uint32_t status_##n = (uint32_t)(ui64Status >> cfg_##n->offset); \
|
|
if (status_##n) { \
|
|
gpio_fire_callbacks(&data_##n->cb, dev_##n, status_##n); \
|
|
}
|
|
|
|
#define APOLLO3P_HANDLE_SHARED_GPIO_IRQ(n) \
|
|
static const struct device *const dev_##n = DEVICE_DT_INST_GET(n); \
|
|
struct ambiq_gpio_data *const data_##n = dev_##n->data; \
|
|
if (pGpioIntStatusMask->U.Msk[n]) { \
|
|
gpio_fire_callbacks(&data_##n->cb, dev_##n, pGpioIntStatusMask->U.Msk[n]); \
|
|
}
|
|
|
|
static void ambiq_gpio_isr(const struct device *dev)
|
|
{
|
|
#if defined(CONFIG_SOC_SERIES_APOLLO3X)
|
|
ARG_UNUSED(dev);
|
|
|
|
#if defined(CONFIG_SOC_APOLLO3_BLUE)
|
|
uint64_t ui64Status;
|
|
|
|
am_hal_gpio_interrupt_status_get(false, &ui64Status);
|
|
am_hal_gpio_interrupt_clear(ui64Status);
|
|
DT_INST_FOREACH_STATUS_OKAY(APOLLO3_HANDLE_SHARED_GPIO_IRQ)
|
|
#elif defined(CONFIG_SOC_APOLLO3P_BLUE)
|
|
AM_HAL_GPIO_MASKCREATE(GpioIntStatusMask);
|
|
am_hal_gpio_interrupt_status_get(false, pGpioIntStatusMask);
|
|
am_hal_gpio_interrupt_clear(pGpioIntStatusMask);
|
|
DT_INST_FOREACH_STATUS_OKAY(APOLLO3P_HANDLE_SHARED_GPIO_IRQ)
|
|
#endif
|
|
#else
|
|
uint32_t int_status;
|
|
struct ambiq_gpio_data *const data = dev->data;
|
|
const struct ambiq_gpio_config *const dev_cfg = dev->config;
|
|
|
|
am_hal_gpio_interrupt_irq_status_get(dev_cfg->irq_num, false, &int_status);
|
|
am_hal_gpio_interrupt_irq_clear(dev_cfg->irq_num, int_status);
|
|
|
|
gpio_fire_callbacks(&data->cb, dev, int_status);
|
|
#endif
|
|
}
|
|
|
|
static int ambiq_gpio_pin_interrupt_configure(const struct device *dev, gpio_pin_t pin,
|
|
enum gpio_int_mode mode, enum gpio_int_trig trig)
|
|
{
|
|
const struct ambiq_gpio_config *const dev_cfg = dev->config;
|
|
struct ambiq_gpio_data *const data = dev->data;
|
|
|
|
int ret = 0;
|
|
#if defined(CONFIG_SOC_SERIES_APOLLO3X)
|
|
am_hal_gpio_pincfg_t pincfg = g_AM_HAL_GPIO_DEFAULT;
|
|
int gpio_pin = pin + dev_cfg->offset;
|
|
|
|
ret = am_hal_gpio_pinconfig_get(gpio_pin, &pincfg);
|
|
|
|
if (mode == GPIO_INT_MODE_DISABLED) {
|
|
pincfg.eIntDir = AM_HAL_GPIO_PIN_INTDIR_NONE;
|
|
ret = am_hal_gpio_pinconfig(gpio_pin, pincfg);
|
|
|
|
k_spinlock_key_t key = k_spin_lock(&data->lock);
|
|
|
|
AM_HAL_GPIO_MASKCREATE(GpioIntMask);
|
|
ret = am_hal_gpio_interrupt_clear(AM_HAL_GPIO_MASKBIT(pGpioIntMask, gpio_pin));
|
|
ret = am_hal_gpio_interrupt_disable(AM_HAL_GPIO_MASKBIT(pGpioIntMask, gpio_pin));
|
|
k_spin_unlock(&data->lock, key);
|
|
|
|
} else {
|
|
if (mode == GPIO_INT_MODE_LEVEL) {
|
|
return -ENOTSUP;
|
|
}
|
|
switch (trig) {
|
|
case GPIO_INT_TRIG_LOW:
|
|
pincfg.eIntDir = AM_HAL_GPIO_PIN_INTDIR_HI2LO;
|
|
break;
|
|
case GPIO_INT_TRIG_HIGH:
|
|
pincfg.eIntDir = AM_HAL_GPIO_PIN_INTDIR_LO2HI;
|
|
break;
|
|
case GPIO_INT_TRIG_BOTH:
|
|
pincfg.eIntDir = AM_HAL_GPIO_PIN_INTDIR_BOTH;
|
|
break;
|
|
default:
|
|
pincfg.eIntDir = AM_HAL_GPIO_PIN_INTDIR_NONE;
|
|
break;
|
|
}
|
|
ret = am_hal_gpio_pinconfig(gpio_pin, pincfg);
|
|
|
|
irq_enable(dev_cfg->irq_num);
|
|
|
|
k_spinlock_key_t key = k_spin_lock(&data->lock);
|
|
|
|
AM_HAL_GPIO_MASKCREATE(GpioIntMask);
|
|
ret = am_hal_gpio_interrupt_clear(AM_HAL_GPIO_MASKBIT(pGpioIntMask, gpio_pin));
|
|
ret = am_hal_gpio_interrupt_enable(AM_HAL_GPIO_MASKBIT(pGpioIntMask, gpio_pin));
|
|
k_spin_unlock(&data->lock, key);
|
|
}
|
|
#else
|
|
am_hal_gpio_pincfg_t pincfg = am_hal_gpio_pincfg_default;
|
|
int gpio_pin = pin + (dev_cfg->offset >> 2);
|
|
uint32_t int_status;
|
|
|
|
ret = am_hal_gpio_pinconfig_get(gpio_pin, &pincfg);
|
|
|
|
if (mode == GPIO_INT_MODE_DISABLED) {
|
|
pincfg.GP.cfg_b.eIntDir = AM_HAL_GPIO_PIN_INTDIR_NONE;
|
|
ret = am_hal_gpio_pinconfig(gpio_pin, pincfg);
|
|
|
|
k_spinlock_key_t key = k_spin_lock(&data->lock);
|
|
|
|
ret = am_hal_gpio_interrupt_irq_status_get(dev_cfg->irq_num, false, &int_status);
|
|
ret = am_hal_gpio_interrupt_irq_clear(dev_cfg->irq_num, int_status);
|
|
ret = am_hal_gpio_interrupt_control(AM_HAL_GPIO_INT_CHANNEL_0,
|
|
AM_HAL_GPIO_INT_CTRL_INDV_DISABLE,
|
|
(void *)&gpio_pin);
|
|
k_spin_unlock(&data->lock, key);
|
|
|
|
} else {
|
|
if (mode == GPIO_INT_MODE_LEVEL) {
|
|
return -ENOTSUP;
|
|
}
|
|
switch (trig) {
|
|
case GPIO_INT_TRIG_LOW:
|
|
pincfg.GP.cfg_b.eIntDir = AM_HAL_GPIO_PIN_INTDIR_HI2LO;
|
|
break;
|
|
case GPIO_INT_TRIG_HIGH:
|
|
pincfg.GP.cfg_b.eIntDir = AM_HAL_GPIO_PIN_INTDIR_LO2HI;
|
|
break;
|
|
case GPIO_INT_TRIG_BOTH:
|
|
/*
|
|
* GPIO_INT_TRIG_BOTH is not supported on Ambiq Apollo4 Plus Platform
|
|
* ERR008: GPIO: Dual-edge interrupts are not vectoring
|
|
*/
|
|
return -ENOTSUP;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
ret = am_hal_gpio_pinconfig(gpio_pin, pincfg);
|
|
|
|
irq_enable(dev_cfg->irq_num);
|
|
|
|
k_spinlock_key_t key = k_spin_lock(&data->lock);
|
|
|
|
ret = am_hal_gpio_interrupt_irq_status_get(dev_cfg->irq_num, false, &int_status);
|
|
ret = am_hal_gpio_interrupt_irq_clear(dev_cfg->irq_num, int_status);
|
|
ret = am_hal_gpio_interrupt_control(AM_HAL_GPIO_INT_CHANNEL_0,
|
|
AM_HAL_GPIO_INT_CTRL_INDV_ENABLE,
|
|
(void *)&gpio_pin);
|
|
k_spin_unlock(&data->lock, key);
|
|
}
|
|
#endif
|
|
return ret;
|
|
}
|
|
|
|
static int ambiq_gpio_manage_callback(const struct device *dev, struct gpio_callback *callback,
|
|
bool set)
|
|
{
|
|
struct ambiq_gpio_data *const data = dev->data;
|
|
|
|
return gpio_manage_callback(&data->cb, callback, set);
|
|
}
|
|
|
|
#if defined(CONFIG_SOC_SERIES_APOLLO3X)
|
|
static void ambiq_gpio_cfg_func(void)
|
|
{
|
|
/* Apollo3 GPIO banks share the same irq number, connect to bank0 once when init and handle
|
|
* different banks in ambiq_gpio_isr
|
|
*/
|
|
static bool global_irq_init = true;
|
|
|
|
if (!global_irq_init) {
|
|
return;
|
|
}
|
|
|
|
global_irq_init = false;
|
|
|
|
/* Shared irq config default to BANK0. */
|
|
IRQ_CONNECT(GPIO_IRQn, DT_INST_IRQ(0, priority), ambiq_gpio_isr, DEVICE_DT_INST_GET(0), 0);
|
|
}
|
|
#endif
|
|
|
|
static int ambiq_gpio_init(const struct device *port)
|
|
{
|
|
const struct ambiq_gpio_config *const dev_cfg = port->config;
|
|
|
|
NVIC_ClearPendingIRQ(dev_cfg->irq_num);
|
|
|
|
#if defined(CONFIG_SOC_SERIES_APOLLO3X)
|
|
ambiq_gpio_cfg_func();
|
|
#else
|
|
dev_cfg->cfg_func();
|
|
#endif
|
|
return 0;
|
|
}
|
|
|
|
static const struct gpio_driver_api ambiq_gpio_drv_api = {
|
|
.pin_configure = ambiq_gpio_pin_configure,
|
|
#ifdef CONFIG_GPIO_GET_CONFIG
|
|
.pin_get_config = ambiq_gpio_get_config,
|
|
#endif
|
|
.port_get_raw = ambiq_gpio_port_get_raw,
|
|
.port_set_masked_raw = ambiq_gpio_port_set_masked_raw,
|
|
.port_set_bits_raw = ambiq_gpio_port_set_bits_raw,
|
|
.port_clear_bits_raw = ambiq_gpio_port_clear_bits_raw,
|
|
.port_toggle_bits = ambiq_gpio_port_toggle_bits,
|
|
.pin_interrupt_configure = ambiq_gpio_pin_interrupt_configure,
|
|
.manage_callback = ambiq_gpio_manage_callback,
|
|
#ifdef CONFIG_GPIO_GET_DIRECTION
|
|
.port_get_direction = ambiq_gpio_port_get_direction,
|
|
#endif
|
|
};
|
|
|
|
#if defined(CONFIG_SOC_SERIES_APOLLO3X)
|
|
/* Apollo3 GPIO banks share the same irq number, connect irq here will cause build error, so we
|
|
* leave this function blank here and do it in ambiq_gpio_cfg_func
|
|
*/
|
|
#define AMBIQ_GPIO_CONFIG_FUNC(n) static void ambiq_gpio_cfg_func_##n(void){};
|
|
#else
|
|
#define AMBIQ_GPIO_CONFIG_FUNC(n) \
|
|
static void ambiq_gpio_cfg_func_##n(void) \
|
|
{ \
|
|
IRQ_CONNECT(DT_INST_IRQN(n), DT_INST_IRQ(n, priority), ambiq_gpio_isr, \
|
|
DEVICE_DT_INST_GET(n), 0); \
|
|
\
|
|
return; \
|
|
};
|
|
#endif
|
|
|
|
#define AMBIQ_GPIO_DEFINE(n) \
|
|
static struct ambiq_gpio_data ambiq_gpio_data_##n; \
|
|
static void ambiq_gpio_cfg_func_##n(void); \
|
|
static const struct ambiq_gpio_config ambiq_gpio_config_##n = { \
|
|
.common = \
|
|
{ \
|
|
.port_pin_mask = GPIO_PORT_PIN_MASK_FROM_DT_INST(n), \
|
|
}, \
|
|
.base = DT_REG_ADDR(DT_INST_PARENT(n)), \
|
|
.offset = DT_INST_REG_ADDR(n), \
|
|
.ngpios = DT_INST_PROP(n, ngpios), \
|
|
.irq_num = DT_INST_IRQN(n), \
|
|
.cfg_func = ambiq_gpio_cfg_func_##n}; \
|
|
AMBIQ_GPIO_CONFIG_FUNC(n) \
|
|
DEVICE_DT_INST_DEFINE(n, ambiq_gpio_init, NULL, &ambiq_gpio_data_##n, \
|
|
&ambiq_gpio_config_##n, PRE_KERNEL_1, CONFIG_GPIO_INIT_PRIORITY, \
|
|
&ambiq_gpio_drv_api);
|
|
|
|
DT_INST_FOREACH_STATUS_OKAY(AMBIQ_GPIO_DEFINE)
|