84 lines
2.7 KiB
YAML
84 lines
2.7 KiB
YAML
# Copyright (c) 2019, STMicroelectronics
|
|
# SPDX-License-Identifier: Apache-2.0
|
|
|
|
description: |
|
|
STM32 DMAMUX controller
|
|
|
|
The STM32 DMAMUX is a direct memory access multiplexer
|
|
capable of supporting independent DMA channels.
|
|
DMAMUX clients connected to the STM32 DMA ultiplexer must use a two-cell specifier
|
|
for each dmamux channel: a phandle to the DMA multiplexer plus the following 2 integer cells:
|
|
1. channel: the mux channel from 0 to <dma-channels> - 1
|
|
2. slot: the request line Multiplexer ID
|
|
3. channel-config: A 32bit mask specifying the DMA channel configuration
|
|
which is device dependent:
|
|
-bit 6-7 : Direction (see dma.h)
|
|
0x0: MEM to MEM
|
|
0x1: MEM to PERIPH
|
|
0x2: PERIPH to MEM
|
|
0x3: reserved for PERIPH to PERIPH
|
|
-bit 9 : Peripheral Increment Address
|
|
0x0: no address increment between transfers
|
|
0x1: increment address between transfers
|
|
-bit 10 : Memory Increment Address
|
|
0x0: no address increment between transfers
|
|
0x1: increment address between transfers
|
|
-bit 11-12 : Peripheral data size
|
|
0x0: Byte (8 bits)
|
|
0x1: Half-word (16 bits)
|
|
0x2: Word (32 bits)
|
|
0x3: reserved
|
|
-bit 13-14 : Memory data size
|
|
0x0: Byte (8 bits)
|
|
0x1: Half-word (16 bits)
|
|
0x2: Word (32 bits)
|
|
0x3: reserved
|
|
-bit 15: Peripheral Increment Offset Size not USED for DMA V2
|
|
0x0: offset size is linked to the peripheral bus width
|
|
0x1: offset size is fixed to 4 (32-bit alignment)
|
|
-bit 16-17 : Priority level
|
|
0x0: low
|
|
0x1: medium
|
|
0x2: high
|
|
0x3: very high
|
|
exemple for stm32wb55x
|
|
dmamux1: dmamux@40020800 {
|
|
compatible = "st,stm32-dmamux";
|
|
...
|
|
dma-channels = <14>;
|
|
dma-generators = <4>;
|
|
dma-requests= <36>;
|
|
status = "disabled";
|
|
label = "DMAMUX_1";
|
|
};
|
|
for client SPI of stm32wb55x
|
|
spi1: spi@40013000 {
|
|
compatible = "st,stm32-spi";
|
|
dmas = <&dmamux1 11 7 0x20440
|
|
&dmamux1 1 6 0x20480>;
|
|
dma-names = "tx", "rx";
|
|
};
|
|
|
|
compatible: "st,stm32-dmamux"
|
|
|
|
include: dmamux-controller.yaml
|
|
|
|
properties:
|
|
reg:
|
|
required: true
|
|
|
|
interrupts:
|
|
required: true
|
|
|
|
"#dma-cells":
|
|
const: 3
|
|
|
|
# Parameter syntax of stm32 follows the dma client dts syntax
|
|
# in the Linux kernel declared in
|
|
# https://git.kernel.org/pub/scm/linux/kernel/git/devicetree/devicetree-rebasing.git/plain/Bindings/dma/st,stm32-dmamux.yaml
|
|
|
|
dma-cells:
|
|
- channel
|
|
- slot
|
|
- channel-config
|