60 lines
1.9 KiB
ReStructuredText
60 lines
1.9 KiB
ReStructuredText
.. _x-nucleo-53l0a1-sample:
|
|
|
|
X-NUCLEO-53L0A1 ranging and gesture detection sensor expansion board
|
|
#####################################################################
|
|
|
|
Overview
|
|
********
|
|
This sample demonstrate the usage of the 4 digits x 7 segments display and the
|
|
three VL53L0X ranging sensors on the :ref:`x_nucleo_53l0a1_shield`.
|
|
|
|
When flashed on a board, 2 modes are available. To switch from one mode to the
|
|
other, press the button ``sw0``.
|
|
|
|
Distance (onboard sensor)
|
|
-------------------------
|
|
|
|
This is the default mode when starting up. In this mode, if the distance to
|
|
the center sensor (soldered on the shield) is lower than 1.25m, then the
|
|
4x7 segment display shows the distance in cm.
|
|
|
|
Proximity (onboard + satellites)
|
|
--------------------------------
|
|
|
|
In this mode, the 4x7 segment display shows 3 stacked horizontal bars if there
|
|
is something in proximity for each sensor. The left sensor is shown on the
|
|
leftmost digit, then the center sensor, then the right sensor.
|
|
The proximity threshold is configured in
|
|
:kconfig:option:`CONFIG_VL53L0X_PROXIMITY_THRESHOLD`
|
|
|
|
To switch from one mode to another, press the button ``sw0``
|
|
|
|
Requirements
|
|
************
|
|
|
|
This sample communicates over I2C with the X-NUCLEO-53L0A1 shield
|
|
stacked on a board with an Arduino connector. The board's I2C must be
|
|
configured for the I2C Arduino connector (both for pin muxing
|
|
and devicetree). The board must also have a button with the alias ``sw0``
|
|
in its device tree.
|
|
|
|
References
|
|
**********
|
|
|
|
* `X-NUCLEO-53L0A1 website`_
|
|
|
|
Building and Running
|
|
********************
|
|
|
|
This sample runs with X-NUCLEO-53L0A1 stacked on any board with a matching
|
|
Arduino connector. For this example, we use a :ref:`nucleo_f429zi_board` board.
|
|
|
|
.. zephyr-app-commands::
|
|
:zephyr-app: samples/shields/x_nucleo_53l0a1
|
|
:board: nucleo_f429zi
|
|
:goals: build
|
|
:compact:
|
|
|
|
.. _X-NUCLEO-53L0A1 website:
|
|
https://www.st.com/en/evaluation-tools/x-nucleo-53l0a1.html
|