299 lines
6.7 KiB
Plaintext
299 lines
6.7 KiB
Plaintext
menuconfig UART_K20
|
|
bool "K20 serial driver"
|
|
default n
|
|
select SERIAL_HAS_DRIVER
|
|
help
|
|
This option enables the K20 serial driver.
|
|
This specific driver can be used for the serial hardware
|
|
available at the Freescale FRDM K64F platform.
|
|
|
|
# ---------- Port 0 ----------
|
|
|
|
menuconfig UART_K20_PORT_0
|
|
bool "Enable K20 UART Port 0"
|
|
default n
|
|
depends on UART_K20
|
|
help
|
|
This tells the driver to configure the UART port at boot, depending on
|
|
the additional configure options below.
|
|
|
|
config UART_K20_PORT_0_NAME
|
|
string "Port 0 Device Name"
|
|
default "UART_0"
|
|
depends on UART_K20_PORT_0
|
|
help
|
|
This is the device name for UART, and is included in the device
|
|
struct.
|
|
|
|
config UART_K20_PORT_0_BASE_ADDR
|
|
hex "Port 0 Base Address"
|
|
default 0x00000000
|
|
depends on UART_K20_PORT_0
|
|
help
|
|
The base address of UART port.
|
|
|
|
Leave this at 0x00000000 to skip initialization at boot.
|
|
|
|
config UART_K20_PORT_0_IRQ
|
|
int "Port 0 Interrupt Vector"
|
|
default 0
|
|
depends on UART_K20_PORT_0
|
|
help
|
|
The interrupt vector for UART port. This is used for interrupt driven
|
|
transfers.
|
|
|
|
config UART_K20_PORT_0_IRQ_PRI
|
|
int "Port 0 Interrupt Priority"
|
|
default 0
|
|
depends on UART_K20_PORT_0
|
|
help
|
|
The interrupt priority for UART port.
|
|
|
|
config UART_K20_PORT_0_BAUD_RATE
|
|
int "Port 0 Baud Rate"
|
|
default 0
|
|
depends on UART_K20_PORT_0
|
|
help
|
|
The baud rate for UART port to be set to at boot.
|
|
|
|
Leave at 0 to skip initialization.
|
|
|
|
config UART_K20_PORT_0_CLK_FREQ
|
|
int "Port 0 Clock Frequency"
|
|
default 0
|
|
depends on UART_K20_PORT_0
|
|
help
|
|
The clock frequency for UART port.
|
|
|
|
# ---------- Port 1 ----------
|
|
|
|
menuconfig UART_K20_PORT_1
|
|
bool "Enable K20 UART Port 1"
|
|
default n
|
|
depends on UART_K20
|
|
help
|
|
This tells the driver to configure the UART port at boot, depending on
|
|
the additional configure options below.
|
|
|
|
config UART_K20_PORT_1_NAME
|
|
string "Port 1 Device Name"
|
|
default "UART_1"
|
|
depends on UART_K20_PORT_1
|
|
help
|
|
This is the device name for UART, and is included in the device
|
|
struct.
|
|
|
|
config UART_K20_PORT_1_BASE_ADDR
|
|
hex "Port 1 Base Address"
|
|
default 0x00000000
|
|
depends on UART_K20_PORT_1
|
|
help
|
|
The base address of UART port.
|
|
|
|
Leave this at 0x00000000 to skip initialization at boot.
|
|
|
|
config UART_K20_PORT_1_IRQ
|
|
int "Port 1 Interrupt Vector"
|
|
default 0
|
|
depends on UART_K20_PORT_1
|
|
help
|
|
The interrupt vector for UART port. This is used for interrupt driven
|
|
transfers.
|
|
|
|
config UART_K20_PORT_1_IRQ_PRI
|
|
int "Port 1 Interrupt Priority"
|
|
default 0
|
|
depends on UART_K20_PORT_1
|
|
help
|
|
The interrupt priority for UART port.
|
|
|
|
config UART_K20_PORT_1_BAUD_RATE
|
|
int "Port 1 Baud Rate"
|
|
default 0
|
|
depends on UART_K20_PORT_1
|
|
help
|
|
The baud rate for UART port to be set to at boot.
|
|
|
|
Leave at 0 to skip initialization.
|
|
|
|
config UART_K20_PORT_1_CLK_FREQ
|
|
int "Port 1 Clock Frequency"
|
|
default 0
|
|
depends on UART_K20_PORT_1
|
|
help
|
|
The clock frequency for UART port.
|
|
|
|
# ---------- Port 2 ----------
|
|
|
|
menuconfig UART_K20_PORT_2
|
|
bool "Enable K20 UART Port 2"
|
|
default n
|
|
depends on UART_K20
|
|
help
|
|
This tells the driver to configure the UART port at boot, depending on
|
|
the additional configure options below.
|
|
|
|
config UART_K20_PORT_2_NAME
|
|
string "Port 2 Device Name"
|
|
default "UART_2"
|
|
depends on UART_K20_PORT_2
|
|
help
|
|
This is the device name for UART, and is included in the device
|
|
struct.
|
|
|
|
config UART_K20_PORT_2_BASE_ADDR
|
|
hex "Port 2 Base Address"
|
|
default 0x00000000
|
|
depends on UART_K20_PORT_2
|
|
help
|
|
The base address of UART port.
|
|
|
|
Leave this at 0x00000000 to skip initialization at boot.
|
|
|
|
config UART_K20_PORT_2_IRQ
|
|
int "Port 2 Interrupt Vector"
|
|
default 0
|
|
depends on UART_K20_PORT_2
|
|
help
|
|
The interrupt vector for UART port. This is used for interrupt driven
|
|
transfers.
|
|
|
|
config UART_K20_PORT_2_IRQ_PRI
|
|
int "Port 2 Interrupt Priority"
|
|
default 0
|
|
depends on UART_K20_PORT_2
|
|
help
|
|
The interrupt priority for UART port.
|
|
|
|
config UART_K20_PORT_2_BAUD_RATE
|
|
int "Port 2 Baud Rate"
|
|
default 0
|
|
depends on UART_K20_PORT_2
|
|
help
|
|
The baud rate for UART port to be set to at boot.
|
|
|
|
Leave at 0 to skip initialization.
|
|
|
|
config UART_K20_PORT_2_CLK_FREQ
|
|
int "Port 2 Clock Frequency"
|
|
default 0
|
|
depends on UART_K20_PORT_2
|
|
help
|
|
The clock frequency for UART port.
|
|
|
|
# ---------- Port 3 ----------
|
|
|
|
menuconfig UART_K20_PORT_3
|
|
bool "Enable K20 UART Port 3"
|
|
default n
|
|
depends on UART_K20
|
|
help
|
|
This tells the driver to configure the UART port at boot, depending on
|
|
the additional configure options below.
|
|
|
|
config UART_K20_PORT_3_NAME
|
|
string "Port 3 Device Name"
|
|
default "UART_3"
|
|
depends on UART_K20_PORT_3
|
|
help
|
|
This is the device name for UART, and is included in the device
|
|
struct.
|
|
|
|
config UART_K20_PORT_3_BASE_ADDR
|
|
hex "Port 3 Base Address"
|
|
default 0x00000000
|
|
depends on UART_K20_PORT_3
|
|
help
|
|
The base address of UART port.
|
|
|
|
Leave this at 0x00000000 to skip initialization at boot.
|
|
|
|
config UART_K20_PORT_3_IRQ
|
|
int "Port 3 Interrupt Vector"
|
|
default 0
|
|
depends on UART_K20_PORT_3
|
|
help
|
|
The interrupt vector for UART port. This is used for interrupt driven
|
|
transfers.
|
|
|
|
config UART_K20_PORT_3_IRQ_PRI
|
|
int "Port 3 Interrupt Priority"
|
|
default 0
|
|
depends on UART_K20_PORT_3
|
|
help
|
|
The interrupt priority for UART port.
|
|
|
|
config UART_K20_PORT_3_BAUD_RATE
|
|
int "Port 3 Baud Rate"
|
|
default 0
|
|
depends on UART_K20_PORT_3
|
|
help
|
|
The baud rate for UART port to be set to at boot.
|
|
|
|
Leave at 0 to skip initialization.
|
|
|
|
config UART_K20_PORT_3_CLK_FREQ
|
|
int "Port 3 Clock Frequency"
|
|
default 0
|
|
depends on UART_K20_PORT_3
|
|
help
|
|
The clock frequency for UART port.
|
|
|
|
# ---------- Port 4 ----------
|
|
|
|
menuconfig UART_K20_PORT_4
|
|
bool "Enable K20 UART Port 4"
|
|
default n
|
|
depends on UART_K20
|
|
help
|
|
This tells the driver to configure the UART port at boot, depending on
|
|
the additional configure options below.
|
|
|
|
config UART_K20_PORT_4_NAME
|
|
string "Port 4 Device Name"
|
|
default "UART_4"
|
|
depends on UART_K20_PORT_4
|
|
help
|
|
This is the device name for UART, and is included in the device
|
|
struct.
|
|
|
|
config UART_K20_PORT_4_BASE_ADDR
|
|
hex "Port 4 Base Address"
|
|
default 0x00000000
|
|
depends on UART_K20_PORT_4
|
|
help
|
|
The base address of UART port.
|
|
|
|
Leave this at 0x00000000 to skip initialization at boot.
|
|
|
|
config UART_K20_PORT_4_IRQ
|
|
int "Port 4 Interrupt Vector"
|
|
default 0
|
|
depends on UART_K20_PORT_4
|
|
help
|
|
The interrupt vector for UART port. This is used for interrupt driven
|
|
transfers.
|
|
|
|
config UART_K20_PORT_4_IRQ_PRI
|
|
int "Port 4 Interrupt Priority"
|
|
default 0
|
|
depends on UART_K20_PORT_4
|
|
help
|
|
The interrupt priority for UART port.
|
|
|
|
config UART_K20_PORT_4_BAUD_RATE
|
|
int "Port 4 Baud Rate"
|
|
default 0
|
|
depends on UART_K20_PORT_4
|
|
help
|
|
The baud rate for UART port to be set to at boot.
|
|
|
|
Leave at 0 to skip initialization.
|
|
|
|
config UART_K20_PORT_4_CLK_FREQ
|
|
int "Port 4 Clock Frequency"
|
|
default 0
|
|
depends on UART_K20_PORT_4
|
|
help
|
|
The clock frequency for UART port.
|