81 lines
2.5 KiB
ReStructuredText
81 lines
2.5 KiB
ReStructuredText
.. _x-nucleo-iks01a3-shub-sample:
|
|
|
|
X-NUCLEO-IKS01A3: shield (Mode 2) sample
|
|
########################################
|
|
|
|
Overview
|
|
********
|
|
This sample is provided as an example to test the X-NUCLEO-IKS01A3 shield
|
|
configured in Sensor Hub mode (Mode 2).
|
|
Please refer to :ref:`x-nucleo-iks01a3` for more info on this configuration.
|
|
|
|
This sample enables LIS2DW12 and LSM6DSO sensors. Since all other shield
|
|
devices are connected to LSM6DSO, the LSM6DSO driver is configured in sensorhub
|
|
mode (CONFIG_LSM6DSO_SENSORHUB=y) with a selection of two maximum slaves
|
|
among LPS22HH, HTS221 and LIS2MDL (default is LIS2MDL + LPS22HH).
|
|
|
|
Then sensor data are displayed periodically
|
|
|
|
- LIS2DW12 3-Axis acceleration
|
|
- LSM6DSO 6-Axis acceleration and angular velocity
|
|
- LSM6DSO (from LIS2MDL) 3-Axis magnetic field intensity
|
|
- LSM6DSO (from LPS22HH) ambient temperature and atmospheric pressure
|
|
|
|
Optionally HTS221 can substitute one between LIS2MDL and LPS22HH
|
|
|
|
- LSM6DSO (from HTS221): ambient temperature and relative humidity
|
|
|
|
|
|
Requirements
|
|
************
|
|
|
|
This sample communicates over I2C with the X-NUCLEO-IKS01A3 shield
|
|
stacked on a board with an Arduino connector. The board's I2C must be
|
|
configured for the I2C Arduino connector (both for pin muxing
|
|
and devicetree). See for example the :ref:`nucleo_f401re_board` board
|
|
source code:
|
|
|
|
- :file:`$ZEPHYR_BASE/boards/arm/nucleo_f401re/nucleo_f401re.dts`
|
|
- :file:`$ZEPHYR_BASE/boards/arm/nucleo_f401re/pinmux.c`
|
|
|
|
Please note that this sample can't be used with boards already supporting
|
|
one of the sensors available on the shield (such as disco_l475_iot1)
|
|
as sensors multiple instances are not supported.
|
|
|
|
References
|
|
**********
|
|
|
|
- X-NUCLEO-IKS01A3: http://www.st.com/en/ecosystems/x-nucleo-iks01a3.html
|
|
|
|
Building and Running
|
|
********************
|
|
|
|
This sample runs with X-NUCLEO-IKS01A3 stacked on any board with a matching
|
|
Arduino connector. For this example, we use a :ref:`nucleo_f401re_board` board.
|
|
|
|
.. zephyr-app-commands::
|
|
:zephyr-app: samples/shields/x_nucleo_iks01a3/sensorhub/
|
|
:host-os: unix
|
|
:board: nucleo_f401re
|
|
:goals: build
|
|
:compact:
|
|
|
|
Sample Output
|
|
=============
|
|
|
|
.. code-block:: console
|
|
|
|
|
|
X-NUCLEO-IKS01A3 sensor dashboard
|
|
|
|
LIS2DW12: Accel (m.s-2): x: -0.077, y: 0.536, z: 9.648
|
|
LSM6DSO: Accel (m.s-2): x: -0.062, y: -0.028, z: 10.035
|
|
LSM6DSO: GYro (dps): x: -0.003, y: -0.001, z: 0.000
|
|
LSM6DSO: Magn (gauss): x: -0.052, y: -0.222, z: -0.059
|
|
LSM6DSO: Temperature: 27.9 C
|
|
LSM6DSO: Pressure:100.590 kpa
|
|
1:: lsm6dso acc trig 208
|
|
1:: lsm6dso gyr trig 208
|
|
|
|
<updated endlessly every 2 seconds>
|