zephyr

History

Alex Porosanu 55eb4a11cd samples: bluetooth: add missing VEGABoard overlays The default DTS of VEGABoard does not enable the necessary nodes for the SW LL to function; as such an overlay is needed for each sample that is intended to be run on the VEGABoard. Some of the samples miss this overlay so this patch adds them. Signed-off-by: Alex Porosanu <alexandru.porosanu@nxp.com>		2020-02-08 10:23:49 +02:00
..
src	samples: convert bluetooth mesh samples to new gpio API	2020-02-05 12:00:36 +01:00
CMakeLists.txt	Bluetooth: Mesh: Same config for all nrf51_qfaa boards in sample	2019-09-11 14:04:16 +03:00
README.rst	doc: Bluetooth: Documentation overhaul	2019-03-13 10:40:05 +01:00
microbit_gatt.conf	samples: Bluetooth: Increase ISR_STACK_SIZE value	2019-12-10 15:34:26 +02:00
nrf51_qfaa.conf	samples: Bluetooth: Increase ISR_STACK_SIZE value	2019-12-10 15:34:26 +02:00
prj.conf	Bluetooth: Mesh: Clean up sample config	2019-12-09 17:13:41 +02:00
prj_bbc_microbit.conf	samples: Bluetooth: Increase ISR_STACK_SIZE value	2019-12-10 15:34:26 +02:00
rv32m1_vega_ri5cy.overlay	samples: bluetooth: add missing VEGABoard overlays	2020-02-08 10:23:49 +02:00
sample.yaml	samples: add test identifier	2019-03-29 17:44:11 -04:00

README.rst

.. _ble_mesh:

Bluetooth: Mesh
###############

Overview
********

This sample demonstrates Bluetooth Mesh functionality. It has several
standard Mesh models, and supports provisioning over both the
Advertising and the GATT Provisioning Bearers (i.e. PB-ADV and PB-GATT).
The application also needs a functioning serial console, since that's
used for the Out-of-Band provisioning procedure.

Requirements
************

* A board with Bluetooth LE support, or
* QEMU with BlueZ running on the host

Building and Running
********************

This sample can be found under :zephyr_file:`samples/bluetooth/mesh` in the
Zephyr tree.

See :ref:`bluetooth samples section <bluetooth-samples>` for details on how
to run the sample inside QEMU.

For other boards, build and flash the application as follows:

.. zephyr-app-commands::
   :zephyr-app: samples/bluetooth/mesh
   :board: <board>
   :goals: flash
   :compact:

Refer to your :ref:`board's documentation <boards>` for alternative
flash instructions if your board doesn't support the ``flash`` target.