zephyr

History

Marc Moreno 3376c67691 samples: Add an MPU test suite This patch contains a MPU test with a set of options to check the correct MPU configuration against the following security issues: * Read at an address that is reserved in the memory map. * Write into the boot Flash/ROM. * Run code located in SRAM. The MPU test application uses the Zephyr shell. Change-Id: Ib40dc76b082b800884fd636a1509a0712227d681 Signed-off-by: Marc Moreno <marc.morenoberengue@linaro.org> Signed-off-by: Vincenzo Frascino <vincenzo.frascino@linaro.org>		2017-04-25 21:53:22 +00:00
..
src	samples: Add an MPU test suite	2017-04-25 21:53:22 +00:00
Makefile	samples: Add an MPU test suite	2017-04-25 21:53:22 +00:00
README.rst	samples: Add an MPU test suite	2017-04-25 21:53:22 +00:00
prj.conf	samples: Add an MPU test suite	2017-04-25 21:53:22 +00:00
prj_single.conf	samples: Add an MPU test suite	2017-04-25 21:53:22 +00:00
testcase.ini	samples: Add an MPU test suite	2017-04-25 21:53:22 +00:00

README.rst

.. _mpu_test:

Memory Protection Unit (MPU) TEST
#################################

Overview
********
This test provides a set options to check the correct MPU configuration
against the following security issues:

* Read at an address that is reserved in the memory map.
* Write into the boot Flash/ROM.
* Run code located in SRAM.

If the MPU configuration is correct each option selected ends up in an MPU
fault.

Building and Running
********************

This project can be built and executed as follows:

.. code-block:: console

   $ cd samples/mpu_test
   $ make BOARD=v2m_beetle

Connect the board to your host computer using the USB port.
Flash the generated zephyr.bin on the board.
Reset the board and you should be able to see on the corresponding
Serial Port the following message:

.. code-block:: console

   ***** BOOTING ZEPHYR OS v1.7.99 - BUILD: Mar  9 2017 13:01:59 *****
   *** MPU test options ***
   1 - Read a reserved address in the memory map
   2 - Write in to boot FLASH/ROM
   3 - Run code located in RAM
   Select an option:

To build the single thread version, use the supplied configuration file for
single thread: :file:`prj_single.conf`:

.. code-block:: console

   $ make BOARD=v2m_beetle CONF_FILE=prj_single.conf run

Sample Output
=============

.. code-block:: console

   ***** BOOTING ZEPHYR OS v1.7.99 - BUILD: Mar  9 2017 13:01:59 *****
   *** MPU test options ***
   1 - Read a reserved address in the memory map
   2 - Write in to boot FLASH/ROM
   3 - Run code located in RAM
   Select an option:
   1 - Read a reserved address in the memory map
   ***** MPU FAULT *****
     Executing thread ID (thread): 0x20000258
     Faulting instruction address:  0x2ac
     Data Access Violation
     Address: 0x20040000
   Fatal fault in essential thread! Spinning...