52 lines
1.4 KiB
ReStructuredText
52 lines
1.4 KiB
ReStructuredText
.. _sht3xd:
|
|
|
|
SHT3XD: High accuracy digital I2C humidity sensor
|
|
#################################################
|
|
|
|
Description
|
|
***********
|
|
|
|
This sample application periodically (2 Hz) measures the ambient
|
|
temperature and humidity. The result is written to the console.
|
|
Optionally, it also shows how to use the upper threshold triggers.
|
|
|
|
References
|
|
**********
|
|
|
|
- `SHT3X-DIS sensor <https://www.sensirion.com/en/environmental-sensors/humidity-sensors/digital-humidity-sensors-for-various-applications/>`_
|
|
|
|
Wiring
|
|
*******
|
|
|
|
This sample uses the SHT3X_DIS sensor controlled using the I2C interface.
|
|
Connect Supply: **VDD**, **GND** and Interface: **SDA**, **SCL**
|
|
and optionally connect the **ALERT** to a interrupt capable GPIO.
|
|
The supply voltage can be in the 2.15V to 5.5V range.
|
|
Depending on the baseboard used, the **SDA** and **SCL** lines require Pull-Up
|
|
resistors.
|
|
|
|
Building and Running
|
|
********************
|
|
|
|
This project outputs sensor data to the console. It requires a SHT3XD
|
|
sensor. It should work with any platform featuring a I2C peripheral
|
|
interface. It does not work on QEMU. In this example below the
|
|
:ref:`nrf51_ble400` board is used.
|
|
|
|
|
|
.. zephyr-app-commands::
|
|
:zephyr-app: samples/sensor/sht3xd
|
|
:board: nrf51_ble400
|
|
:goals: build flash
|
|
|
|
Sample Output
|
|
=============
|
|
|
|
.. code-block:: console
|
|
|
|
SHT3XD: 19.64 Cel ; 41.96 %RH
|
|
SHT3XD: 19.74 Cel ; 42.06 %RH
|
|
SHT3XD: 19.75 Cel ; 42.08 %RH
|
|
|
|
<repeats endlessly>
|