zephyr

History

Gerard Marull-Paretas 79e6b0e0f6 includes: prefer <zephyr/kernel.h> over <zephyr/zephyr.h> As of today <zephyr/zephyr.h> is 100% equivalent to <zephyr/kernel.h>. This patch proposes to then include <zephyr/kernel.h> instead of <zephyr/zephyr.h> since it is more clear that you are including the Kernel APIs and (probably) nothing else. <zephyr/zephyr.h> sounds like a catch-all header that may be confusing. Most applications need to include a bunch of other things to compile, e.g. driver headers or subsystem headers like BT, logging, etc. The idea of a catch-all header in Zephyr is probably not feasible anyway. Reason is that Zephyr is not a library, like it could be for example `libpython`. Zephyr provides many utilities nowadays: a kernel, drivers, subsystems, etc and things will likely grow. A catch-all header would be massive, difficult to keep up-to-date. It is also likely that an application will only build a small subset. Note that subsystem-level headers may use a catch-all approach to make things easier, though. NOTE: This patch is NOT removing the header, just removing its usage in-tree. I'd advocate for its deprecation (add a #warning on it), but I understand many people will have concerns. Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>		2022-09-05 16:31:47 +02:00
..
boards	…
src	includes: prefer <zephyr/kernel.h> over <zephyr/zephyr.h>	2022-09-05 16:31:47 +02:00
CMakeLists.txt	…
README.rst	…
prj.conf	…
sample.yaml	…

README.rst

.. _bme680:

BME680: Integrated environmental sensor
#####################################################

Description
***********

This sample application periodically (every 3s) measures the ambient temperature
in degrees Celsius, atmospheric pressure in kilopascal, relative humidity in percentage,
and gas sensor resistance in ohms. The result is written to the console.

References
**********

 - BME680: https://www.bosch-sensortec.com/bst/products/all_products/bme680

Wiring
*******

This sample uses the BME680 sensor controlled using the I2C interface.
Connect Supply: **VDD**, **VDDIO**, **GND** and Interface: **SDA**, **SCL**.
The supply voltage can be in the 1.8V to 3.6V range.
Depending on the baseboard used, the **SDA** and **SCL** lines require Pull-Up
resistors.

Building and Running
********************

This project outputs sensor data to the console. It requires a BME680
sensor. It should work with any platform featuring a I2C peripheral interface.
It does not work on QEMU.
In this example below the :ref:`nrf52840dk_nrf52840` board is used.


.. zephyr-app-commands::
   :zephyr-app: samples/sensor/bme680
   :board: nrf52840dk_nrf52840
   :goals: build flash

Sample Output
=============

.. code-block:: console

   Device 0x20002b74 name is BME680
   T: 23.988877; P: 97.648568; H: 53.689533; G: 1035.211466
   T: 24.168500; P: 97.648866; H: 53.565966; G: 1046.677896
   T: 24.336533; P: 97.648596; H: 53.353663; G: 1058.656533
   T: 24.589696; P: 97.648366; H: 53.958864; G: 1072.155863
   T: 24.856631; P: 97.648322; H: 53.553669; G: 1096.448788

   <repeats endlessly>