51 lines
1.4 KiB
ReStructuredText
51 lines
1.4 KiB
ReStructuredText
.. _usb_device_testing:
|
|
|
|
Testing USB device support
|
|
##########################
|
|
|
|
Testing over USPIP in native_posix
|
|
***********************************
|
|
|
|
A virtual USB controller implemented through USBIP might be used to test the USB
|
|
Device stack. Follow the general build procedure to build the USB sample for
|
|
the native_posix configuration.
|
|
|
|
Run built sample with:
|
|
|
|
.. code-block:: console
|
|
|
|
west build -t run
|
|
|
|
In a terminal window, run the following command to list USB devices:
|
|
|
|
.. code-block:: console
|
|
|
|
$ usbip list -r localhost
|
|
Exportable USB devices
|
|
======================
|
|
- 127.0.0.1
|
|
1-1: unknown vendor : unknown product (2fe3:0100)
|
|
: /sys/devices/pci0000:00/0000:00:01.2/usb1/1-1
|
|
: (Defined at Interface level) (00/00/00)
|
|
: 0 - Vendor Specific Class / unknown subclass / unknown protocol (ff/00/00)
|
|
|
|
In a terminal window, run the following command to attach the USB device:
|
|
|
|
.. code-block:: console
|
|
|
|
$ sudo usbip attach -r localhost -b 1-1
|
|
|
|
The USB device should be connected to your Linux host, and verified with the following commands:
|
|
|
|
.. code-block:: console
|
|
|
|
$ sudo usbip port
|
|
Imported USB devices
|
|
====================
|
|
Port 00: <Port in Use> at Full Speed(12Mbps)
|
|
unknown vendor : unknown product (2fe3:0100)
|
|
7-1 -> usbip://localhost:3240/1-1
|
|
-> remote bus/dev 001/002
|
|
$ lsusb -d 2fe3:0100
|
|
Bus 007 Device 004: ID 2fe3:0100
|